Production of TiNi sintered body by spark-plasma sintering of (Ti+Ni) powder mixture

2002 ◽  
Author(s):  
Yong-Hee Choi ◽  
Do-Hyun Lee ◽  
Ji-Soon Kim ◽  
Ji-Hoon Kang ◽  
Young-Soon Kwon
Keyword(s):  
Spark Plasma Sintering ◽  
Powder Mixture ◽  
Sintered Body ◽  
Plasma Sintering ◽  
Ni Powder ◽  
Spark Plasma

Rapid synthesis of dense NiTi alloy through spark plasma sintering of a TiH2/Ni powder mixture

2017 ◽  
Vol 191 ◽  
pp. 89-92 ◽  
Author(s):  
Bolu Liu ◽  
Shuigen Huang ◽  
Liugang Chen ◽  
Jan Van Humbeeck ◽  
Jef Vleugels
Keyword(s):  
Spark Plasma Sintering ◽  
Powder Mixture ◽  
Niti Alloy ◽  
Rapid Synthesis ◽  
Plasma Sintering ◽  
Ni Powder ◽  
Spark Plasma

scholarly journals B6O ceramic by in-situ reactive spark plasma sintering of a B2O3 and B powder mixture

2014 ◽  
Vol 122 (1425) ◽  
pp. 336-340 ◽  
Author(s):  
Ievgen SOLODKYI ◽  
Hanna BORODIANSKA ◽  
Ting ZHAO ◽  
Yoshio SAKKA ◽  
Petre BADICA ◽  
...  
Keyword(s):  
Spark Plasma Sintering ◽  
Powder Mixture ◽  
Plasma Sintering ◽  
Spark Plasma

Spark Plasma Sintering of Mechanically Activated Ni and Al Powders

2014 ◽  
Vol 1040 ◽  
pp. 772-777 ◽  
Author(s):  
Lilia I. Shevtsova ◽  
Michail A. Korchagin ◽  
Alexander Thömmes ◽  
Vyacheslav I. Mali ◽  
Alexander G. Anisimov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Spark Plasma Sintering ◽  
Temperature Synthesis ◽  
Plasma Sintering ◽  
High Temperature Synthesis ◽  
Ni Powder ◽  
Spark Plasma ◽  
Paper Structure ◽  
Sintered Materials

In this paper structure and mechanical properties of Ni3Al intermetallic compound was studied. The materials was fabricated according to different schemes, which combined mechanical alloying of Ni and Al powders, self-propagating high temperature synthesis (SHS) and spark plasma sintering (SPS). Relative density of all sintered samples was ~ 97 %. Microhardness of the sintered materials ranged from 6100 to 6300 MPa. SPS of 86.71 % wt. Ni and 13.29 % wt. Ni powder at 1100 °C led to formation of material with the highest level of tensile strength equal to 400 MPa.

scholarly journals Fabrication of Cu-Based SiC Composites by Spark Plasma Sintering of Cu-Nitrate Coated SiC Powders

2017 ◽  
Vol 62 (2) ◽  
pp. 1407-1410
Author(s):  
Y.-K. Jeong ◽  
Y.S. Kim ◽  
S.-T. Oh
Keyword(s):  
Spark Plasma Sintering ◽  
Powder Mixture ◽  
Powder Processing ◽  
Sem Analysis ◽  
Homogeneous Microstructure ◽  
Dense Microstructure ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
Sic Composites

AbstractAn optimum route to fabricate the Cu-based SiC composites with homogeneous microstructure was investigated. Three methods for developing the densified composites with sound interface between Cu and SiC were compared on the basis of the resulting microstructures. Starting with three powder mixtures of elemental Cu and SiC, elemental Cu and PCS coated SiC or PCS and Cunitrate coated SiC was used to obtain Cu-based SiC composites. SEM analysis revealed that the composite fabricated by spark plasma sintering using elemental SiC and Cu powder mixture showed inhomogeneous microstructure. Conversely, dense microstructure with sound interface was observed in the sintered composites using powder mixture of pre-coated PCS and Cu-nitrate onto SiC. The relationship between powder processing and microstructure was discussed based on the role of coating layer for the wettability

Preparation of red nitride phosphor from powder mixture of metal nitrides using spark plasma sintering

2014 ◽  
Vol 14 (8) ◽  
pp. 1051-1056 ◽  
Author(s):  
Hung Quang Trinh ◽  
Jin Oh Jo ◽  
Sang Baek Lee ◽  
Young Sun Mok
Keyword(s):  
Spark Plasma Sintering ◽  
Powder Mixture ◽  
Metal Nitrides ◽  
Plasma Sintering ◽  
Spark Plasma
Sign in / Sign up

Export Citation Format

Share Document