Load Following Capability for Hybrid Nuclear and Solar Photovoltaic Power Plants with an Energy Storage System

Author(s):  
Caleb Lowe ◽  
Jay Stanley ◽  
Faisal Alosaimi ◽  
Muhammad Yousf ◽  
Jacob Bordelon ◽  
...  
2021 ◽  
Vol 2021 (1) ◽  
pp. 38-44
Author(s):  
I.M. Buratynskyi ◽  

The peculiarity of the operation of solar photovoltaic power plants is the dependence of the generation power on weather conditions, which leads to the maximum production of electrical energy at noon hours of the day. Due to a decrease in electricity consumption, insufficient unloading capacity of pumped storage power plants in the integrated energy system of Ukraine and the specifics of electricity production at solar photovoltaic power plants, dispatching restrictions on the level of generation power are already taking place. To transfer volumes of electrical energy in the world, electrical energy storage systems are used, which operate based on lithium-ion storage batteries. Such systems have a number of advantages over other battery energy systems, which allows their implementation in almost any power generation facility. With the help of energy storage systems, it is possible to make a profit through the purchase of electric energy during a period of low prices and its release during a period of high prices, allowing consumers to save money on its payment. In this paper, we simulate the use of a battery energy storage system for storing electrical energy to transfer excess electrical energy from a solar photovoltaic power plant. To conduct a study and identify excess capacity of a solar photovoltaic power plant, the daily schedule of electrical load is equalized to the capacity of a separate power plant Because of the study, the optimal time for charging and discharging the battery was determined, from which it can be seen that the need to transfer excess electricity to a solar photovoltaic power plant occurs at lunchtime, and their discharge at the peak is the graph of the electrical load of the power system. The aggregate operation of a solar power plant with a total installed capacity of photovoltaic power at the level of 10 MW (DC) and a battery energy storage system for accumulating electric energy with a capacity of 3.75 MWh was simulated. For the study day, the required capacity of a battery system for accumulating electric energy at the level of 1.58 MW was determined. Using the methodology of the levelized cost of electricity and storage, a technical and economic assessment of the transfer of excess capacity of a solar photovoltaic power plant using a battery system for storing electrical energy was carried out. When calculating the cost of storage, the cost of the transferred electrical energy from the solar power plant was taken into account. From the results of technical and economic calculations, it can be seen that, in terms of the cost of equipment, as of 2020, the cost of supplying excess electrical energy from the battery energy storage system is growing when compared with the supply from a solar photovoltaic power plant. Taking into account some forecast assumptions, the cost of electricity supply from the battery energy storage system was calculated for the mode of transferring excess capacity of a solar photovoltaic power plant for 2025 and 2030 years. Keywords: modeling, power system, load demand curve, solar photovoltaic power plant, electric energy storage system, cost


Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 3065 ◽  
Author(s):  
Monika Sandelic ◽  
Daniel-Ioan Stroe ◽  
Florin Iov

This paper focuses on the sizing of a battery energy storage system providing frequency containment reserves in a power system with a large wind power penetration level. A three-stage sizing methodology including the different aspect of battery energy storage system performance is proposed. The first stage includes time-domain simulations, investigating battery energy storage system dynamic response and its capability of providing frequency reserves. The second stage involves lifetime investigation. An economic assessment of the battery unit is carried out by performing the last stage. The main outcome of the proposed methodology is to choose the suitable battery energy storage system size for providing frequency containment reserve from augmented wind power plants while fulfilling relevant evaluation criteria imposed for each stage.


1985 ◽  
Vol 107 (3) ◽  
pp. 569-573 ◽  
Author(s):  
C. M. Harman ◽  
S. Loesch

A method for increasing the peak output of steam power plants through use of a low-pressure feedwater storage system is presented. The generalized availability analysis involves only the low-pressure turbine, low-pressure feedwater heaters, and the storage system. With daily cycling and storage charging at near base load conditions, the turnaround efficiency of the energy storage system was found to approach 100 percent. Storage system turnaround efficiency is decreased when the energy is stored during plant part-load operation.


2021 ◽  
Vol 11 (18) ◽  
pp. 8484
Author(s):  
Seok-Ho Song ◽  
Jin-Young Heo ◽  
Jeong-Ik Lee

A nuclear power plant is one of the power sources that shares a large portion of base-load. However, as the proportion of renewable energy increases, nuclear power plants will be required to generate power more flexibly due to the intermittency of the renewable energy sources. This paper reviews a layout thermally integrating the liquid air energy storage system with a nuclear power plant. To evaluate the performance realistically while optimizing the layout, operating nuclear power plant conditions are used. After revisiting the analysis, the optimized performance of the proposed system is predicted to achieve 59.96% of the round-trip efficiency. However, it is further shown that external environmental conditions could deteriorate the performance. For the design of liquid air energy storage-nuclear power plant integrated systems, both the steam properties of the linked plants and external factors should be considered.


Sign in / Sign up

Export Citation Format

Share Document