Load effects on voltage stability in distribution network with considering of distributed generation

2017 ◽  
Author(s):  
M. Banejad ◽  
M. Kazeminejad
Keyword(s):  
Distributed Generation ◽  
Voltage Stability ◽  
Distribution Network ◽  
Load Effects ◽  
Stability In Distribution

Swarm-Intelligence-Based Optimal Placement and Sizing of Distributed Generation in Distribution Network

2018 ◽  
pp. 29-48 ◽  
Author(s):  
Mahesh Kumar ◽  
Perumal Nallagownden ◽  
Irraivan Elamvazuthi ◽  
Pandian Vasant ◽  
Luqman Hakim Rahman
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Voltage Stability ◽  
Reactive Power ◽  
Distribution Network ◽  
Stability Index ◽  
Pso Algorithm ◽  
Distribution Networks ◽  
Optimal Placement

In the distribution system, distributed generation (DG) are getting more important because of the electricity demands, fossil fuel depletion and environment concerns. The placement and sizing of DGs have greatly impact on the voltage stability and losses in the distribution network. In this chapter, a particle swarm optimization (PSO) algorithm has been proposed for optimal placement and sizing of DG to improve voltage stability index in the radial distribution system. The two i.e. active power and combination of active and reactive power types of DGs are proposed to realize the effect of DG integration. A specific analysis has been applied on IEEE 33 bus system radial distribution networks using MATLAB 2015a software.

scholarly journals Investigation of distributed generation units placement and sizing based on voltage stability condition indicator (VSCI)

2019 ◽  
Vol 10 (3) ◽  
pp. 1317
Author(s):  
Arvind Raj ◽  
Nur Fadilah Ab Aziz ◽  
Zuhaila Mat Yasin ◽  
Nur Ashida Salim
Keyword(s):  
Power System ◽  
Distributed Generation ◽  
Radial Distribution ◽  
Stability Condition ◽  
Power Distribution ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Distribution Network ◽  
Condition Index ◽  
Power Losses

Voltage instability in power distribution systems can result in voltage collapse throughout the grid. Today, with the advanced of power generation technology from renewable sources, concerns of utility companies are much being focused on the stability of the grid when there is an integration of distributed generation (DG) in the system.  This paper presents a study on DG units placement and sizing in a radial distribution network by using a pre-developed index called Voltage Stability Condition Index (VSCI). In this paper, VSCI is used to determine DG placement candidates, while the value of power losses is used to identify the best DG placement. The proposed method is tested on a standard 33-bus radial distribution network and compared with existing Ettehadi and Aman methods. The effectiveness of the method is presented in terms of reduction in power system losses, maximization of system loadability and voltage quality improvement. Results show that VSCI can be utilized as the voltage stability indicator for DG placement in radial distribution power system. The integration of DG is found to improve voltage stability by increasing the system loadability and reducing the power losses of the network.

scholarly journals Voltage Stability Analysis in Medium-Voltage Distribution Networks Using a Second-Order Cone Approximation

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5717
Author(s):  
Oscar Danilo Montoya ◽  
Walter Gil-González ◽  
Andrés Arias-Londoño ◽  
Arul Rajagopalan ◽  
Jesus C. Hernández
Keyword(s):  
Distributed Generation ◽  
Optimal Power Flow ◽  
Voltage Stability ◽  
Distribution Network ◽  
Distribution Networks ◽  
Test System ◽  
Second Order ◽  
Voltage Distribution ◽  
Medium Voltage ◽  
Second Order Cone

This paper addresses the voltage stability margin calculation in medium-voltage distribution networks in the context of exact mathematical modeling. This margin calculation is performed with a second-order cone (SOCP) reformulation of the classical nonlinear non-convex optimal power flow problems. The main idea around the SOCP approximation is to guarantee the global optimal solution via convex optimization, considering as the objective function the λ-coefficient associated with the maximum possible increment of the load consumption at all the nodes. Different simulation cases are considered in one test feeder, described as follows: (i) the distribution network without penetration of distributed generation; (ii) the distribution network with penetration of distributed generation; and (iii) the distribution grid with capacitive compensation. Numerical results in the test system demonstrated the effectiveness of the proposed SOCP approximation to determine the λ-coefficient. In addition, the proposed approximation is compared with nonlinear tools available in the literature. All the simulations are carried out in the MATLAB software with the CVX package and the Gurobi solver.

Sign in / Sign up

Export Citation Format

Share Document