Swarm-Intelligence-Based Optimal Placement and Sizing of Distributed Generation in Distribution Network

2018 ◽  
pp. 29-48 ◽  
Author(s):  
Mahesh Kumar ◽  
Perumal Nallagownden ◽  
Irraivan Elamvazuthi ◽  
Pandian Vasant ◽  
Luqman Hakim Rahman
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Voltage Stability ◽  
Reactive Power ◽  
Distribution Network ◽  
Stability Index ◽  
Pso Algorithm ◽  
Distribution Networks ◽  
Optimal Placement

In the distribution system, distributed generation (DG) are getting more important because of the electricity demands, fossil fuel depletion and environment concerns. The placement and sizing of DGs have greatly impact on the voltage stability and losses in the distribution network. In this chapter, a particle swarm optimization (PSO) algorithm has been proposed for optimal placement and sizing of DG to improve voltage stability index in the radial distribution system. The two i.e. active power and combination of active and reactive power types of DGs are proposed to realize the effect of DG integration. A specific analysis has been applied on IEEE 33 bus system radial distribution networks using MATLAB 2015a software.

Multi-objective optimization of optimal capacitor allocation in radial distribution systems

2020 ◽  
Vol 21 (3) ◽  
Author(s):  
Sayed Mir Shah Danish ◽  
Mikaeel Ahmadi ◽  
Atsushi Yona ◽  
Tomonobu Senjyu ◽  
Narayanan Krishna ◽  
...  
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Reactive Power ◽  
Stability Index ◽  
Distribution Networks ◽  
Optimization Method ◽  
Optimal Size ◽  
Multi Objective Optimization ◽  
Multi Objective

AbstractThe optimal size and location of the compensator in the distribution system play a significant role in minimizing the energy loss and the cost of reactive power compensation. This article introduces an efficient heuristic-based approach to assign static shunt capacitors along radial distribution networks using multi-objective optimization method. A new objective function different from literature is adapted to enhance the overall system voltage stability index, minimize power loss, and to achieve maximum net yearly savings. However, the capacitor sizes are assumed as discrete known variables, which are to be placed on the buses such that it reduces the losses of the distribution system to a minimum. Load sensitive factor (LSF) has been used to predict the most effective buses as the best place for installing compensator devices. IEEE 34-bus and 118-bus test distribution systems are utilized to validate and demonstrate the applicability of the proposed method. The simulation results obtained are compared with previous methods reported in the literature and found to be encouraging.

scholarly journals Loss Minimization of Power Distribution Network using Different Types of Distributed Generation Unit

2015 ◽  
Vol 5 (5) ◽  
pp. 918
Author(s):  
Su Hlaing Win ◽  
Pyone Lai Swe
Keyword(s):  
Power System ◽  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Reactive Power ◽  
Distribution Network ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Optimum Location ◽  
Power Losses

A Radial Distribution network is important in power system area because of its simple design and reduced cost. Reduction of system losses and improvement of voltage profile is one of the key aspects in power system operation. Distributed generators are beneficial in reducing losses effectively in distribution systems as compared to other methods of loss reduction. Sizing and location of DG sources places an important role in reducing losses in distribution network. Four types of DG are considered in this paper with one DG installed for minimize the total real and reactive power losses. The objective of this methodology is to calculate size and to identify the corresponding optimum location for DG placement for minimizing the total real and reactive power losses and to improve voltage profile   in primary distribution system. It can obtain maximum loss reduction for each of four types of optimally placed DGs. Optimal sizing of Distributed Generation can be calculated using exact loss formula and an efficient approach is used to determine the optimum location for Distributed Generation Placement.  To demonstrate the performance of the proposed approach 36-bus radial distribution system in Belin Substation in Myanmar was tested and validated with different sizes and the result was discussed.

scholarly journals Placement of Fixed Size Diesel Generators in IEEE 12 Bus Radial Distribution System to Improve Voltage Stability

2019 ◽  
Vol 9 (1) ◽  
pp. 1080-1086
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Voltage Stability ◽  
Reactive Power ◽  
Power Line ◽  
Fixed Size ◽  
Radial Distribution System ◽  
Line Loss ◽  
Suitable Location

Distributed Generation (DG) is small capacity generating units directly associated to the distributed system. With the penetration of distributed generators nearby the consumer load center support to the distribution system will be enhanced. The Distributed Generation involves both Renewable & sustainable sources of energy to engender power in order to appease the ever increasing energy requirement. Suitable location and capacity of DG units will benefit the achievement of active power system network. The voltage profile and Real power line loss and Reactive power line loss reduction can also be improved with suitable location and allocation of DG. This work proposes a new Simulation method for the placement of fixed Size Diesel Generator in IEEE 12 bus radial distribution system stationed on Voltage stability index and Transmission line losses. This index is progressed by acknowledging steady state node voltages cited in Per Unit.

scholarly journals Siting and Sizing of DG in Medium Primary Radial Distribution System with Enhanced Voltage Stability

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Sanjay Jain ◽  
Ganga Agnihotri ◽  
Shilpa Kalambe ◽  
Renuka Kamdar
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Voltage Stability ◽  
Reactive Power ◽  
Voltage Profile ◽  
Power Losses ◽  
Radial Distribution System ◽  
Power Loss Reduction ◽  
The Impact

This paper intends to enumerate the impact of distributed generation (DG) on distribution system in terms of active as well as reactive power loss reduction and improved voltage stability. The novelty of the method proposed in this paper is the simple and effective way of sizing and siting of DG in a distribution system by using two-port Z-bus parameters. The validity of the method is verified by comparing the results with already published methods. Comparative study presented has shown that the proposed method leads existing methods in terms of its simplicity, undemanding calculation procedures, and less computational efforts and so does the time. The method is implemented on IEEE 69-bus test radial distribution system and results show significant reduction in distribution power losses with improved voltage profile of the system. Simulation is carried out in MATLAB environment for execution of the proposed algorithm.

scholarly journals A Novel Analytical Approach for Optimal Placement and Sizing of Distributed Generations in Radial Electrical Energy Distribution Systems

2021 ◽  
Vol 13 (18) ◽  
pp. 10224
Author(s):  
Sasan Azad ◽  
Mohammad Mehdi Amiri ◽  
Morteza Nazari Heris ◽  
Ali Mosallanejad ◽  
Mohammad Taghi Ameli
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Reducing Power ◽  
Distribution Networks ◽  
Active Power ◽  
Optimal Placement ◽  
Power Losses ◽  
Active Power Losses

Considering the strong influence of distributed generation (DG) in electric distribution systems and its impact on network voltage losses and stability, a new challenge has appeared for such systems. In this study, a novel analytical algorithm is proposed to distinguish the optimal location and size of DGs in radial distribution networks based on a new combined index (CI) to reduce active power losses and improve system voltage profiles. To obtain the CI, active power losses and voltage stability indexes were used in the proposed approach. The CI index with sensitivity analysis was effective in decreasing power losses and improving voltage stability. Optimal DG size was determined based on a search algorithm to reduce active power losses. The considered scheme was examined through IEEE 12-bus and 33-bus radial distribution test systems (RDTS), and the obtained results were compared and validated in comparison with other available methods. The results and analysis verified the effectiveness of the proposed algorithm in reducing power losses and improving the distribution system voltage profiles by determining the appropriate location and optimal DG size. In IEEE 12 and 33 bus networks, the minimum voltage increased from 0.9434 p.u and 0.9039 p.u to 0.9907 p.u and 0.9402 p.u, respectively. Additionally, the annual cost of energy losses decreased by 78.23% and 64.37%, respectively.

Optimal Placement and Sizing of Distributed Generators and Distributed-Static Compensator in Radial Distribution System

2019 ◽  
Vol 8 (1) ◽  
pp. 47-66 ◽  
Author(s):  
Mahesh Kumar ◽  
Bhagwan Das ◽  
Mazhar Hussain Baloch ◽  
Perumal Nallagownden ◽  
Irraivan Elamvazuthi ◽  
...  
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Pso Algorithm ◽  
Optimal Placement ◽  
Radial Distribution System ◽  
Distributed Generators ◽  
Power Loss Reduction ◽  
Power Utilities ◽  
Static Compensator

The electricity demand increment, fossil fuel depletion, and environmental degradation open the interest of power utilities to utilize the distributed generation (DG) and distributed-static compensator (DSTATCOM) in the distribution system. The optimal placement and sizing of these generations have positive benefits, whereas non-optimal placement and size may worsen the existing operational characteristics of the distribution system. Therefore, this article presents a new methodology for optimal placement and sizing of distributed generation and distributed-static compensator in a radial distribution system. Moreover, a short-term planning has been made for power loss reduction with existing and increased load growth using particle swarm optimization (PSO) algorithm. The performance of proposed methodology is tested using different case studies on standard IEEE 33 bus system (RDS). The measured results are also compared with other literature methods and it is revealed that the proposed method gives more significant results.

Optimal Placement and Sizing of Distributed Generation in Distribution System Using Modified Particle Swarm Optimization Algorithm

2018 ◽  
pp. 485-507 ◽  
Author(s):  
Mahesh Kumar ◽  
Perumal Nallagownden ◽  
Irraivan Elamvazuthi ◽  
Pandian Vasant
Keyword(s):  
Particle Swarm Optimization ◽  
Distributed Generation ◽  
Distribution System ◽  
Reactive Power ◽  
Particle Swarm ◽  
Pso Algorithm ◽  
Optimal Placement ◽  
Voltage Profile ◽  
Swarm Optimization ◽  
Modified Particle Swarm Optimization

The electricity demand, fossil fuel depletion and environment issues increase the interest of power engineers to integrate small power generations i.e. called distributed generation (DGs) in the distribution system. The DG in distribution system has many positive effects such as it reduces the system power losses, improves the voltage profile and strengthen the voltage stability etc. The placement and sizing of DG play a major role in optimizing these parameters. Therefore, this chapter proposes a modified Particle Swarm Optimization (PSO) algorithm for finding the optimal placement and sizing of distributed generation in the radial distribution system. Two types of DGs such as an active power and reactive power DGs are tested on standard IEEE 33 radial bus system. Moreover, it can be realized that proposed method gives very effective results when both of active and reactive power DGs are integrated into the distribution system.

scholarly journals Optimal Placement of Distributed Generation Units in Radial Distribution System using Hybrid Techniques

2019 ◽  
Vol 9 (2) ◽  
pp. 1682-1688
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Network ◽  
Optimal Placement ◽  
Flower Pollination Algorithm ◽  
Binary Particle Swarm Optimization ◽  
Radial Distribution System ◽  
Hybrid Techniques

Reconfiguration is a process that supports to eliminate the power loss from a distribution network and this process have the capability to reduce the losses up to a specific point. Additionally, loss minimization may be calculated through the presentation of Distributed Generation (DG) units. Conversely, the incorporation of DG into the distribution network at an improper position may cause higher in losses and fluctuations in voltage. In the meantime, the uncertainty in voltage may produce partial power failure in the system. For that reason, it is essential to deliberate the stability boundaries in DGs position and sizing in the Radial Distribution System (RDS). In this research paper, hybrid Binary Particle Swarm Optimization (BPSO) with Flower Pollination Algorithm (FPA) is proposed for the ideal reconfiguration process and placing the DG in the 69-bus RDS. BPSO is applied to identify the best DG reconfiguration and FPA is proposed to determine the optimal DG size. This technique narrowly changes the DG location in every load bus of the network that delivers the minimum value of the objective function, which is considered as the finest candidate for DG connection. The simulation outcomes indicate the proposed method is more effective in reducing the power loss from 224.9804 to 27.2183 KW with the reduction of 88.8972% when compared to existing algorithm

scholarly journals Voltage Profile Enhancement and Loss Minimization Using Optimal Placement and Sizing of Distributed Generation in Reconfigured Network

Machines ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 20
Author(s):  
Waseem Haider ◽  
S Jarjees Ul Hassan ◽  
Arif Mehdi ◽  
Arif Hussain ◽  
Gerardo Ondo Micha Adjayeng ◽  
...  
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Network ◽  
Optimal Placement ◽  
Total Power ◽  
Voltage Profile ◽  
Penalty Factor ◽  
Before And After

Power loss and voltage instability are major problems in distribution systems. However, these problems are typically mitigated by efficient network reconfiguration, including the integration of distributed generation (DG) units in the distribution network. In this regard, the optimal placement and sizing of DGs are crucial. Otherwise, the network performance will be degraded. This study is conducted to optimally locate and sizing of DGs into a radial distribution network before and after reconfiguration. A multi-objective particle swarm optimization algorithm is utilized to determine the optimal placement and sizing of the DGs before and after reconfiguration of the radial network. An optimal network configuration with DG coordination in an active distribution network overcomes power losses, uplifts voltage profiles, and improves the system stability, reliability, and efficiency. For considering the actual power system scenarios, a penalty factor is also considered, this penalty factor plays a crucial role in the minimization of total power loss and voltage profile enhancement. The simulation results showed a significant improvement in the percentage power loss reduction (32% and 68.05% before and after reconfiguration, respectively) with the inclusion of DG units in the test system. Similarly, the minimum bus voltage of the system is improved by 4.9% and 6.53% before and after reconfiguration, respectively. The comparative study is performed, and the results showed the effectiveness of the proposed method in reducing the voltage deviation and power loss of the distribution system. The proposed algorithm is evaluated on the IEEE-33 bus radial distribution system, using MATLAB software.

Optimization of Real Power Loss and Voltage Stability Index for Distribution Systems with Distributed Generation

2017 ◽  
Vol 33 ◽  
pp. 100-114 ◽  
Author(s):  
Mostafa Elshahed ◽  
Mahmoud Dawod ◽  
Zeinab H. Osman
Keyword(s):  
Genetic Algorithm ◽  
Distributed Generation ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Reactive Power ◽  
Optimization Problems ◽  
Stability Index ◽  
Mixed Integer ◽  
Voltage Profile ◽  
Voltage Stability Index

Integrating Distributed Generation (DG) units into distribution systems can have an impact on the voltage profile, power flow, power losses, and voltage stability. In this paper, a new methodology for DG location and sizing are developed to minimize system losses and maximize voltage stability index (VSI). A proper allocation of DG has to be determined using the fuzzy ranking method to verify best compromised solutions and achieve maximum benefits. Synchronous machines are utilized and its power factor is optimally determined via genetic optimization to inject reactive power to decrease system losses and improve voltage profile and VSI. The Augmented Lagrangian Genetic Algorithm with nonlinear mixed-integer variables and Non-dominated Sorting Genetic Algorithm have been implemented to solve both single/multi-objective function optimization problems. For proposed methodology effectiveness verification, it is tested on 33-bus and 69-bus radial distribution systems then compared with previous works.

Sign in / Sign up

Export Citation Format

Share Document