Modeling of On-Chip Transmission Lines in High-Speed A&MS Design - The Low Frequency Inductance Calculation

2002 ◽  
Author(s):  
Rachel Gordin ◽  
David Goren ◽  
Michael Zelikson
Keyword(s):  
Transmission Lines ◽  
High Speed ◽  
Low Frequency ◽  
On Chip

scholarly journals Electrical Modelling of Multilevel On-Chip Interconnections for High-Speed Integrated Circuits

1992 ◽  
Vol 14 (4) ◽  
pp. 199-218 ◽  
Author(s):  
K. Z. Dimopoulos ◽  
J. N. Avaritsiotis ◽  
S. J. White
Keyword(s):  
Integrated Circuits ◽  
Transmission Lines ◽  
High Speed ◽  
Pulse Propagation ◽  
Unit Length ◽  
Coupled Line ◽  
Lossy Transmission ◽  
Electrical Modelling ◽  
High Bit Rates ◽  
On Chip

A method for the electrical parameters analysis and modelling of lossy-coupled multilayer on-chip interconnection lines at high bit rates is presented in detail. It can be used by the VLSI designer to analyze on-chip interconnections with linear, as well as nonlinear/time varying terminators and to simulate the pulse propagation characteristics in high-speed integrated circuits. First the capacitance, inductance, conductance and resistance matrices per unit length for the given multiconductor geometry is computed. A multiple coupled line model consisting of uncoupled lossy transmission lines and linear dependent current and voltage sources if finally calculated according to the capacitance, inductance, conductance and resistance matrix values computed.

Broadband sub-THz spectroscopy modules integrated in 65-nm CMOS technology

2017 ◽  
Vol 9 (6) ◽  
pp. 1211-1218 ◽  
Author(s):  
Marion K. Matters-Kammerer ◽  
Dave Van Goor ◽  
Lorenzo Tripodi
Keyword(s):  
Frequency Domain ◽  
Transmission Lines ◽  
High Speed ◽  
Schottky Diodes ◽  
Cutoff Frequency ◽  
Design Procedure ◽  
Cmos Technology ◽  
Thz Spectroscopy ◽  
Non Linear ◽  
On Chip

The design and characterization of a broadband 20–480 GHz continuously tuneable on-chip spectrometer based on non-linear transmission lines in 65-nm CMOS technology is presented. The design procedure of the sampler that detects the ultra-broadband signal from the transmitter in time and frequency domain is described in detail. It consists of a non-linear transmission line, a passive pulse differentiator and a high-speed sample and hold-circuit. The relevance of the layout of the Schottky diodes in the sampler with a maximum RC-cutoff frequency of 430 GHz is described. Time domain and frequency domain measurements are presented to characterize the 480 GHz sampler bandwidth as well as the 3.1 ps sampler rise time. A signal to noise ratio of 90 dB at 100 GHz, 70 dB at 200 GHz and more than 30 dB at 480 GHz is reached. Two implementation of the spectrometer with antennas are presented, one with an on-chip antenna and one in a hybrid package. The antenna-less on-chip implementation of the transmitter and sampler requires no external lenses and is miniaturized to an area of 3 mm2. Future applications include analysis of fluids in microfluidic packages or droplet analysis in bio-medical or pharmaceutical applications.

Optimal Termination of On-Chip Transmission-Lines for High-Speed Signaling

2007 ◽  
Vol E90-C (6) ◽  
pp. 1267-1273 ◽  
Author(s):  
A. TSUCHIYA ◽  
M. HASHIMOTO ◽  
H. ONODERA
Keyword(s):  
Transmission Lines ◽  
High Speed ◽  
On Chip

A Novel Fault-location Method for HVDC Transmission Lines Based on Concentric Relaxation Principle and Wavelet Packet

2020 ◽  
Vol 13 (5) ◽  
pp. 705-716
Author(s):  
Congshan Li ◽  
Ping He ◽  
Feng Wang ◽  
Cunxiang Yang ◽  
Yukun Tao ◽  
...  
Keyword(s):  
Transmission Lines ◽  
Traveling Wave ◽  
Fault Location ◽  
Wave Attenuation ◽  
Wavelet Packet ◽  
Low Frequency ◽  
Evaluation Process ◽  
Location Method ◽  
Hvdc Transmission ◽  
Instantaneous Energy

Background: A novel fault location method of HVDC transmission line based on a concentric relaxation principle is proposed in this paper. Methods: Due to the different position of fault, the instantaneous energy measured from rectifier and inverter are different, and the ratio k between them is the relationship to the fault location d. Through the analysis of amplitude-frequency characteristics, we found that the wave attenuation characteristic of low frequency in the traveling wave is stable, and the amplitude of energy is larger, so we get the instantaneous energy ratio by using the low-frequency data. By using the method of wavelet packet decomposition, the voltage traveling wave signal was decomposed. Results: Finally, calculate the value k. By using the data fitting, the relative function of k and d can be got, that is the fault location function. Conclusion: After an exhaustive evaluation process considering different fault locations, fault resistances, and noise on the unipolar DC transmission system, four-machine two-area AC/DC parallel system, and an actual complex grid, the method presented here showed a very accurate and robust behavior.

Sign in / Sign up

Export Citation Format

Share Document