Wave energy power transmission lines: Electric and magnetic field propagation

Author(s):  
Jordan Pommerenck ◽  
Justin Pommerenck ◽  
Alex Yokochi ◽  
Annette von Jouanne
F1000Research ◽  
2021 ◽  
Vol 10 ◽  
pp. 1136
Author(s):  
Azhan Fikry ◽  
Siow Chun Lim ◽  
Mohd Zainal Abidin Ab Kadir

Background: There has been rising concern amongst the public regarding their home's proximity to high tension power transmission lines. The primary cause of fear is the impact of the electromagnetic interference (EMI) radiation on the nearby occupants' health. Despite the presence of national permissible limits of EMI radiation, there is still lack of information with regards to the EMI radiation of the types of power lines configuration in Malaysia. Methods: The electric and magnetic fields of several selected power transmission lines were simulated using the EMFACDC software program from the recommendation ITU-T K.90. Five types of power transmission lines available in Malaysia are considered. Results: It was found that the simulated electric and magnetic field levels at all the power lines' right of way (ROW) boundary complies with the prescribed exposure limit. However, the electromagnetic fields (EMF) level increases significantly as the separation distance is reduced from 30m. For a more conservative approach, the ROW can be set at 30m across all transmission voltage level and corridor area condition. Conclusion: It can be concluded that Malaysia's power transmission lines are within the prescribed exposure limits. To further minimize the electric and magnetic field level, it is recommended that the residential building should be built at least 30 meters away from the power transmission lines, especially for the 275kV double circuit, 275/132kV quadruple circuit, and 500kV double circuit lines.


2016 ◽  
Vol 2016 (4) ◽  
pp. 8-10 ◽  
Author(s):  
B.I. Kuznetsov ◽  
◽  
A.N. Turenko ◽  
T.B. Nikitina ◽  
A.V. Voloshko ◽  
...  

1992 ◽  
Vol 12 (1Supplement) ◽  
pp. 303-306
Author(s):  
Young Chan CHOI ◽  
Hirotsugu OHSHIMA ◽  
Ryu-ichiro OHYAMA ◽  
Kiyoji KANEKO

Author(s):  
Yuji Hosokawa ◽  
Ryuji Koga ◽  
Akihiro Ametani

There is a risk of alternating current (AC) corrosion on pipelines that are buried in proximity to overhead AC power transmission lines due to induced AC caused by magnetic fields around the power transmission lines. Grounding of the line pipes is generally applied for the mitigation of induced AC. In the present paper, studies were conducted to predict the induced AC level through the measurement of magnetic flux density using magnetic field sensors. The relationship between magnetic flux density and induced AC level was then obtained through theoretical studies. In addition, as a result of field tests conducted on an existing pipeline buried in proximity to power transmission lines, induced AC level could be predicted through the measurement of magnetic flux density using magnetic field sensors above the pipeline route. Magnetic flux density can be measured regardless of the number and location of power transmission lines as well as other metallic structures, and therefore it is expected that the AC prediction method using magnetic field sensors can be applied on the pipelines buried in proximity to multiple power transmission lines and/or to other metallic structures with complicated configuration.


Sign in / Sign up

Export Citation Format

Share Document