scholarly journals EMI radiation of power transmission lines in Malaysia

F1000Research ◽  
2021 ◽  
Vol 10 ◽  
pp. 1136
Author(s):  
Azhan Fikry ◽  
Siow Chun Lim ◽  
Mohd Zainal Abidin Ab Kadir
Keyword(s):  
Magnetic Field ◽  
Transmission Lines ◽  
Electromagnetic Interference ◽  
Power Transmission ◽  
Separation Distance ◽  
Power Lines ◽  
Power Transmission Lines ◽  
Exposure Limits ◽  
Electric And Magnetic Field ◽  
The Impact

Background: There has been rising concern amongst the public regarding their home's proximity to high tension power transmission lines. The primary cause of fear is the impact of the electromagnetic interference (EMI) radiation on the nearby occupants' health. Despite the presence of national permissible limits of EMI radiation, there is still lack of information with regards to the EMI radiation of the types of power lines configuration in Malaysia. Methods: The electric and magnetic fields of several selected power transmission lines were simulated using the EMFACDC software program from the recommendation ITU-T K.90. Five types of power transmission lines available in Malaysia are considered. Results: It was found that the simulated electric and magnetic field levels at all the power lines' right of way (ROW) boundary complies with the prescribed exposure limit. However, the electromagnetic fields (EMF) level increases significantly as the separation distance is reduced from 30m. For a more conservative approach, the ROW can be set at 30m across all transmission voltage level and corridor area condition. Conclusion: It can be concluded that Malaysia's power transmission lines are within the prescribed exposure limits. To further minimize the electric and magnetic field level, it is recommended that the residential building should be built at least 30 meters away from the power transmission lines, especially for the 275kV double circuit, 275/132kV quadruple circuit, and 500kV double circuit lines.

scholarly journals Location of overhead power lines within Bukowe hills mesoregion in relation to the assessment of forest area fragmentation

2021 ◽  
Vol 3 ◽  
pp. 41-52
Author(s):  
Paweł Pieńkowski ◽  
◽  
Marcin Stoltman ◽  
Bogusław Zakrzewski ◽  
◽  
...  
Keyword(s):  
Transmission Lines ◽  
Power Transmission ◽  
Natura 2000 ◽  
Forest Area ◽  
Power Lines ◽  
Power Transmission Lines ◽  
Investment Projects ◽  
Overhead Power Lines ◽  
The Impact ◽  
Forest Habitats

National power grid in Poland requires modernisation, therefore by 2030 numerous actions are scheduled regarding the expansion of the existing network and the construction of new electricity transmission lines (power lines). The planned activities will undoubtedly change the quality of landscape and result in fragmentation of forest habitats, some of which are characterised by high biodiversity and constitute a key element of ecological corridors. The aim of the present paper was to outline the issue of the impact of the power line corridors on forest habitat fragmentation, as well as to present the GuidosToolbox software (Graphical User Interface for the Description of image Objects and their Shapes) used, among other things, for the determination of the degree of fragmentation of forest habitats. The analysis concerned the Puszcza Bukowa forest, which is a part of the Natura 2000 network and is protected under the Szczecin Landscape Park ‘Puszcza Bukowa’. Despite abundant natural assets of the Puszcza Bukowa forest, it was necessary to run many power lines through its area due to location of the forest in the vicinity of the Szczecin agglomeration. The course of power lines contributed to the fragmentation of the discussed forest complex and to the depletion of its interior classified with the GuidosToolbox software as ‘Intact’. The software discussed in the present paper may prove useful in the identification of the degree of forest area fragmentation, connected with the course of high-voltage power transmission lines, and in the assessment of the impact of the planned investment projects on biocenoses.

scholarly journals Assessing the Health Risk Due to Exposure to Non-ionizing Radiation in the Form of Magnetic Field from Electrical Power Lines

2021 ◽  
Vol 9 (3) ◽  
pp. 72-77
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Ionizing Radiation ◽  
Electric Power ◽  
Current Density ◽  
Transmission Lines ◽  
Power Transmission ◽  
Power Lines ◽  
Power Transmission Lines ◽  
Electric Power Transmission Lines

We are all exposed to electromagnetic fields from electrical appliances, electric power transmission lines, distribution lines and power substations. This study was focused on investigating the possible risks to human health due to exposure to extremely low frequency varying magnetic fields from 330 kV, 132 kV, 33 kV and 11kV power lines in southeastern Nigeria. To determine the risks, a magnetic field meter was used to take measurements of magnetic flux from these power lines. From which, the induced current density due to exposure to varying magnetic fields was obtained using a model of the human body known as the prolate spheroid model. The maximum mean magnetic field and current density induced as obtained from the study were 4.790 µT and 0.04214 mA/m², which were obtained from the 330 kV power line. The study results are well below the reference levels of the International Commission for Non-Ionizing Radiation Protection, which are used for comparison, indicating that there is very low exposure risk to people living near these electric power transmission lines.

METHOD OF SYNTHESIS OF CLOSED-LOOP SYSTEMS OF ACTIVE SHIELDING MAGNETIC FIELD OF POWER TRANSMISSION LINES

2016 ◽  
Vol 2016 (4) ◽  
pp. 8-10 ◽  
Author(s):  
B.I. Kuznetsov ◽  
◽  
A.N. Turenko ◽  
T.B. Nikitina ◽  
A.V. Voloshko ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Transmission Lines ◽  
Closed Loop ◽  
Power Transmission ◽  
Power Transmission Lines ◽  
Closed Loop Systems ◽  
Active Shielding

scholarly journals Calculation of thermal field and ampacity of overhead power transmission lines using finite element method

2014 ◽  
Vol 17 (1) ◽  
pp. 16-29
Author(s):  
Long Van Hoang Vo ◽  
Tu Phan Vu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Transmission Lines ◽  
Power Transmission ◽  
Power Lines ◽  
Power Transmission Lines ◽  
Thermal Fields ◽  
Overhead Power Transmission Lines ◽  
Transmission And Distribution ◽  
Element Method

The population explosion and development of the national economy are two main causes of increasing the power demand. Besides, the Distributed Generations (DG) connected with the power transmission and distribution networks increase the transmission power on the existing lines as well. In general, for solving this problem, power utilities have to install some new power transmission and distribution lines. However, in some cases, the install of new power lines can strongly effect to the environment and even the economic efficiency is low. Nowadays, the problem considered by scientists, researchers and engineers is how to use efficiently the existing power transmission and distribution lines through calculating and monitoring their current carrying capacity at higher operation temperature, and thus the optimal use of these existing lines will bring higher efficiency to power companies. Generally, the current carrying capacity of power lines is computed based on the calculation of their thermal fields illustrated in IEEE [1], IEC [2] and CIGRE [3]. In this paper, we present the new approach that is the application of the finite element method based on Comsol Multiphysics software for modeling thermal fields of overhead power transmission lines. In particular, we investigate the influence of environmental conditions, such as wind velocity, wind direction, temperature and radiation coefficient on the typical line of ACSR. The comparisons between our numerical solutions and those obtained from IEEE have been shown the high accuracy and applicability of finite element method to compute thermal fields of overhead power transmission lines.

Analysis of mathematical models of transmission lines.

2020 ◽  
Vol 23 (2) ◽  
pp. 16-19
Author(s):  
G. SHEINA ◽  
Keyword(s):  
Mathematical Model ◽  
Power Systems ◽  
Transmission Lines ◽  
Power Supply ◽  
Power Supply System ◽  
Power Transmission ◽  
Supply System ◽  
Power Lines ◽  
Power Transmission Lines ◽  
The Mathematical Model

This paper investigates a mathematical model of one elements of the power supply system - power transmission lines. The type of models depends on the initial simplifications, which in turn are determined by the complexity of the physics of processes. The task of improving the accuracy of modeling of emergency processes in the power system is due to the significant complexity of modern power systems and their equipment, high-speed relay protection, automation of emergency management and the introduction of higher-speed switching equipment. One of the reasons for a significant number of serious emergencies in the system is the lack of complete and reliable information for modeling modes in the design and operation of power systems. The development of a mathematical model of a three-phase power line, which provides adequate reflection of both normal and emergency processes, is relevant. The advanced mathematical model of power transmission lines allows to investigate various operational modes of electric networks. The improved mathematical model of the power transmission line reflects all the features of physical processes at state modes and transient process and provides sufficient accuracy of the results. The type of mathematical model of power transmission lines depends on the accepted simplifications, depending on the task of research. The purpose of this work is to analyze the mathematical model of the power transmission line to study the modes of operation of the power supply system, with the possibility of its application to take into account all the design features of overhead and cable power lines. The mathematical model of the power line for the study of the modes of operation of the power supply system is analyzed. It is used to take into account the design features of overhead and cable power lines, skin effect.

scholarly journals Fault Detection in Power Equipment via an Unmanned Aerial System Using Multi Modal Data

Sensors ◽  
2019 ◽  
Vol 19 (13) ◽  
pp. 3014 ◽  
Author(s):  
Bushra Jalil ◽  
Giuseppe Riccardo Leone ◽  
Massimo Martinelli ◽  
Davide Moroni ◽  
Maria Antonietta Pascali ◽  
...  
Keyword(s):  
Transmission Lines ◽  
Power Plants ◽  
Large Scale ◽  
Infrared Imaging ◽  
Power Transmission ◽  
Video Stream ◽  
Power Lines ◽  
Power Transmission Lines ◽  
Ground Station ◽  
Illumination Changes

The power transmission lines are the link between power plants and the points of consumption, through substations. Most importantly, the assessment of damaged aerial power lines and rusted conductors is of extreme importance for public safety; hence, power lines and associated components must be periodically inspected to ensure a continuous supply and to identify any fault and defect. To achieve these objectives, recently, Unmanned Aerial Vehicles (UAVs) have been widely used; in fact, they provide a safe way to bring sensors close to the power transmission lines and their associated components without halting the equipment during the inspection, and reducing operational cost and risk. In this work, a drone, equipped with multi-modal sensors, captures images in the visible and infrared domain and transmits them to the ground station. We used state-of-the-art computer vision methods to highlight expected faults (i.e., hot spots) or damaged components of the electrical infrastructure (i.e., damaged insulators). Infrared imaging, which is invariant to large scale and illumination changes in the real operating environment, supported the identification of faults in power transmission lines; while a neural network is adapted and trained to detect and classify insulators from an optical video stream. We demonstrate our approach on data captured by a drone in Parma, Italy.

Sign in / Sign up

Export Citation Format

Share Document