This study derives the first analytic solution for evaluating the optimal treatment parameters needed for delivering a desired thermal dose during thermal therapies consisting of a single heating pulse. Each treatment is divided into four time periods (two power-on and two power-off), and the thermal dose delivered during each of those periods is evaluated using the non-linear Sapareto and Dewey equation relating thermal dose to temperature and time. The results reveal that the thermal dose delivered during the second power-on period when T>43C (TD2) and the initial power-off period when T>43C (TD3) contribute the major portions of the total thermal dose needed for a successful treatment (taken as 240 CEM43°C), and that TD3 dominates for treatments with higher peak temperatures. For a fixed perfusion value, the analytical results show that once the maximum treatment temperature and the total thermal dose (e.g., 240 CEM43°C) are specified, then the required heating time and the applied power magnitude are uniquely determined. These are the optimal heating parameters since lower/higher values result in under-dosing/over-dosing of the treated region. It is also shown that higher maximum treatment temperatures result in shorter treatment times, and for each patient blood flow there is a maximum allowable temperature that can be used to reach the desired thermal dose. In addition, since TD2 and TD3 contribute most of the total thermal dose, and they are both significantly affected by the blood flow present for high treatment temperatures, these results show that perfusion effects must be considered when attempting to optimize high temperature thermal therapy treatments (no excess thermal dose delivered, minimum power applied and shortest treatment time attained).
Minimum-Time Thermal Dose Control of Thermal Therapies
