Propagation speed free emitter location finding using TDOA

2013 ◽  
Author(s):  
O. Cakir ◽  
I. Kaya ◽  
A. Yazgan
Keyword(s):  
Propagation Speed ◽  
Emitter Location ◽  
Location Finding

Influence of the applied pressure of the transducer on the propagation speed of the ultrasonic wave in wood

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Edgar V.M. Carrasco ◽  
Rejane C. Alves ◽  
Mônica A. Smits ◽  
Vinnicius D. Pizzol ◽  
Ana Lucia C. Oliveira ◽  
...  
Keyword(s):  
Wave Propagation ◽  
Applied Pressure ◽  
Pressure Gauge ◽  
Eucalyptus Grandis ◽  
Propagation Speed ◽  
Ultrasonic Waves ◽  
Ultrasonic Speed ◽  
Wave Propagation Speed ◽  
Propagation Technique ◽  
Non Destructive

Abstract The non-destructive wave propagation technique is used to estimate the wood’s modulus of elasticity. The propagation speed of ultrasonic waves is influenced by some factors, among them: the type of transducer used in the test, the form of coupling and the sensitivity of the transducers. The objective of the study was to evaluate the influence of the contact pressure of the transducers on the ultrasonic speed. Ninety-eight tests were carried out on specimens of the species Eucalyptus grandis, with dimensions of 120 × 120 × 50 mm. The calibration of the pressure exerted by the transducer was controlled by a pressure gauge using a previously calibrated load cell. The robust statistical analysis allowed to validate the experimental results and to obtain consistent conclusions. The results showed that the wave propagation speed is not influenced by the pressure exerted by the transducer.

scholarly journals Effects of gap thickness and emitter location on the photoluminescence enhancement of monolayer MoS2 in a plasmonic nanoparticle-film coupled system

Nanophotonics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 2097-2105
Author(s):  
Xiaozhuo Qi ◽  
Tsz Wing Lo ◽  
Di Liu ◽  
Lantian Feng ◽  
Yang Chen ◽  
...  
Keyword(s):  
Near Field ◽  
Central Area ◽  
Field Enhancement ◽  
Coupled System ◽  
Film Structure ◽  
Plasmonic Nanoparticle ◽  
Emitter Location ◽  
Radiation Properties ◽  
Radiation Enhancement ◽  
Quantum Emitters

AbstractPlasmonic nanocavities comprised of metal film-coupled nanoparticles have emerged as a versatile nanophotonic platform benefiting from their ultrasmall mode volume and large Purcell factors. In the weak-coupling regime, the particle-film gap thickness affects the photoluminescence (PL) of quantum emitters sandwiched therein. Here, we investigated the Purcell effect-enhanced PL of monolayer MoS2 inserted in the gap of a gold nanoparticle (AuNP)–alumina (Al2O3)–gold film (Au Film) structure. Under confocal illumination by a 532 nm CW laser, we observed a 7-fold PL peak intensity enhancement for the cavity-sandwiched MoS2 at an optimal Al2O3 thickness of 5 nm, corresponding to a local PL enhancement of ∼350 by normalizing the actual illumination area to the cavity’s effective near-field enhancement area. Full-wave simulations reveal a counterintuitive fact that radiation enhancement comes from the non-central area of the cavity rather than the cavity center. By scanning an electric dipole across the nanocavity, we obtained an average radiation enhancement factor of about 65 for an Al2O3 spacer thickness of 4 nm, agreeing well with the experimental thickness and indicating further PL enhancement optimization. Our results indicate the importance of configuration optimization, emitter location and excitation condition when using such plasmonic nanocavities to modulate the radiation properties of quantum emitters.

scholarly journals Time-Delay Identification Using Multiscale Ordinal Quantifiers

Entropy ◽  
2021 ◽  
Vol 23 (8) ◽  
pp. 969
Author(s):  
Miguel C. Soriano ◽  
Luciano Zunino
Keyword(s):  
Time Series ◽  
Time Delay ◽  
Real World ◽  
Propagation Speed ◽  
Real World Data ◽  
External Observer ◽  
The North ◽  
Weather Phenomenon ◽  
The North Atlantic Oscillation ◽  
Finite Propagation Speed

Time-delayed interactions naturally appear in a multitude of real-world systems due to the finite propagation speed of physical quantities. Often, the time scales of the interactions are unknown to an external observer and need to be inferred from time series of observed data. We explore, in this work, the properties of several ordinal-based quantifiers for the identification of time-delays from time series. To that end, we generate artificial time series of stochastic and deterministic time-delay models. We find that the presence of a nonlinearity in the generating model has consequences for the distribution of ordinal patterns and, consequently, on the delay-identification qualities of the quantifiers. Here, we put forward a novel ordinal-based quantifier that is particularly sensitive to nonlinearities in the generating model and compare it with previously-defined quantifiers. We conclude from our analysis on artificially generated data that the proper identification of the presence of a time-delay and its precise value from time series benefits from the complementary use of ordinal-based quantifiers and the standard autocorrelation function. We further validate these tools with a practical example on real-world data originating from the North Atlantic Oscillation weather phenomenon.

The effect of fine droplets on laminar propagation speed of a strained acetone-methane flame: Experiment and simulations

2021 ◽  
Vol 229 ◽  
pp. 111377
Author(s):  
Luming Fan ◽  
Bo Tian ◽  
Cheng Tung Chong ◽  
Mohammad Nazri Mohd Jaafar ◽  
Kenji Tanno ◽  
...  
Keyword(s):  
Propagation Speed ◽  
Methane Flame
Sign in / Sign up

Export Citation Format

Share Document