The effect of fine droplets on laminar propagation speed of a strained acetone-methane flame: Experiment and simulations

2021 ◽  
Vol 229 ◽  
pp. 111377
Author(s):  
Luming Fan ◽  
Bo Tian ◽  
Cheng Tung Chong ◽  
Mohammad Nazri Mohd Jaafar ◽  
Kenji Tanno ◽  
...  
Author(s):  
Sylvain Lamige ◽  
C. Galizzi ◽  
M. KГјhni ◽  
K.M. Lyons ◽  
Frederic Andre ◽  
...  
Keyword(s):  

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Edgar V.M. Carrasco ◽  
Rejane C. Alves ◽  
Mônica A. Smits ◽  
Vinnicius D. Pizzol ◽  
Ana Lucia C. Oliveira ◽  
...  

Abstract The non-destructive wave propagation technique is used to estimate the wood’s modulus of elasticity. The propagation speed of ultrasonic waves is influenced by some factors, among them: the type of transducer used in the test, the form of coupling and the sensitivity of the transducers. The objective of the study was to evaluate the influence of the contact pressure of the transducers on the ultrasonic speed. Ninety-eight tests were carried out on specimens of the species Eucalyptus grandis, with dimensions of 120 × 120 × 50 mm. The calibration of the pressure exerted by the transducer was controlled by a pressure gauge using a previously calibrated load cell. The robust statistical analysis allowed to validate the experimental results and to obtain consistent conclusions. The results showed that the wave propagation speed is not influenced by the pressure exerted by the transducer.


Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1018
Author(s):  
Massimo Marcioni ◽  
Jenny Alongi ◽  
Elisabetta Ranucci ◽  
Mario Malinconico ◽  
Paola Laurienzo ◽  
...  

The hitherto known polyamidoamines (PAAs) are not suitable as structural materials because they are usually water-soluble or swellable in water. This paper deals with the synthesis and characterization of semi-crystalline hydrophobic PAAs (H-PAAs) by combining different bis-sec-amines with bis-acrylamides obtained from C6–C12 bis-prim-amines. H-PAAs were initially obtained in a solution of benzyl alcohol, a solvent suitable for both monomers and polymers. Their number average molecular weights, M¯n, which were determined with 1H-NMR by evaluating the percentage of their terminal units, varied from 6000 to >10,000. The solubility, thermal properties, ignitability and water resistance of H-PAAs were determined. They were soluble in organic solvents, semi-crystalline and thermally stable. The most promising ones were also prepared using a bulk process, which has never been previously reported for PAA synthesis. In the form of films, these H-PAAs were apparently unaffected by water. The films underwent tensile and wettability tests. They showed similar Young moduli (260–263 MPa), whereas the maximum stress and the stress at break depended on the number of methylene groups of the starting bis-acrylamides. Their wettability was somewhat higher than that of common Nylons. Interestingly, none of the H-PAAs considered, either as films or powders, ignited after prolonged exposure to a methane flame.


Entropy ◽  
2021 ◽  
Vol 23 (8) ◽  
pp. 969
Author(s):  
Miguel C. Soriano ◽  
Luciano Zunino

Time-delayed interactions naturally appear in a multitude of real-world systems due to the finite propagation speed of physical quantities. Often, the time scales of the interactions are unknown to an external observer and need to be inferred from time series of observed data. We explore, in this work, the properties of several ordinal-based quantifiers for the identification of time-delays from time series. To that end, we generate artificial time series of stochastic and deterministic time-delay models. We find that the presence of a nonlinearity in the generating model has consequences for the distribution of ordinal patterns and, consequently, on the delay-identification qualities of the quantifiers. Here, we put forward a novel ordinal-based quantifier that is particularly sensitive to nonlinearities in the generating model and compare it with previously-defined quantifiers. We conclude from our analysis on artificially generated data that the proper identification of the presence of a time-delay and its precise value from time series benefits from the complementary use of ordinal-based quantifiers and the standard autocorrelation function. We further validate these tools with a practical example on real-world data originating from the North Atlantic Oscillation weather phenomenon.


Fuel ◽  
2021 ◽  
Vol 285 ◽  
pp. 119141
Author(s):  
Li Guo ◽  
Ming Zhai ◽  
Qianhao Shen ◽  
Hongkun Guo ◽  
Peng Dong

1997 ◽  
Vol 335 ◽  
pp. 165-188 ◽  
Author(s):  
ALFONSO M. GAÑÁN-CALVO

Electrohydrodynamically (EHD) driven capillary jets are analysed in this work in the parametrical limit of negligible charge relaxation effects, i.e. when the electric relaxation time of the liquid is small compared to the hydrodynamic times. This regime can be found in the electrospraying of liquids when Taylor's charged capillary jets are formed in a steady regime. A quasi-one-dimensional EHD model comprising temporal balance equations of mass, momentum, charge, the capillary balance across the surface, and the inner and outer electric fields equations is presented. The steady forms of the temporal equations take into account surface charge convection as well as Ohmic bulk conduction, inner and outer electric field equations, momentum and pressure balances. Other existing models are also compared. The propagation speed of surface disturbances is obtained using classical techniques. It is shown here that, in contrast with previous models, surface charge convection provokes a difference between the upstream and the downstream wave speed values, the upstream wave speed, to some extent, being delayed. Subcritical, supercritical and convectively unstable regions are then identified. The supercritical nature of the microjets emitted from Taylor's cones is highlighted, and the point where the jet switches from a stable to a convectively unstable regime (i.e. where the propagation speed of perturbations become zero) is identified. The electric current carried by those jets is an eigenvalue of the problem, almost independent of the boundary conditions downstream, in an analogous way to the gas flow in convergent–divergent nozzles exiting into very low pressure. The EHD model is applied to an experiment and the relevant physical quantities of the phenomenon are obtained. The EHD hypotheses of the model are then checked and confirmed within the limits of the one-dimensional assumptions.


2005 ◽  
Author(s):  
Alexander G. Akchurin ◽  
Garif G. Akchurin ◽  
Roman P. Gorshkov ◽  
Leonid A. Melnikov ◽  
Vyacheslav G. Ninel ◽  
...  

2004 ◽  
Author(s):  
Duck-Bong Seo ◽  
Z. C. Feng

Surface acoustic wave (SAW) sensors are self-excited oscillators. Self-excitation is a consequence of the finite amount of delay in the circuit. The oscillation frequency is affected by the wave propagation speed which further depends on surface adsorption. Therefore, measurement on the surface adsorption is done by measuring the frequency change of the self-excited oscillation. In dual delay line oscillators the difference between the surface physical conditions is reflected through the difference in oscillation frequencies. Delay differential equations are used to model the sensor. Bifurcation analysis of the averaged equations indicates the presence of synchronization. The occurrence of synchronization is further demonstrated through numerical simulations. Synchronization makes the frequency measurement irrelevant. We propose phase measurement as an alternative in the presence of strong coupling between the two oscillators.


Sign in / Sign up

Export Citation Format

Share Document