A New Family of Zero-Voltage-Transition Nonisolated Bidirectional Converters With Simple Auxiliary Circuit

2016 ◽  
Vol 63 (3) ◽  
pp. 1519-1527 ◽  
Author(s):  
Mohammad Reza Mohammadi ◽  
Hosein Farzanehfard
2017 ◽  
Vol 26 (06) ◽  
pp. 1750105 ◽  
Author(s):  
Ebrahim Babaei ◽  
Zahra Saadatizadeh ◽  
Behnam Mohammadi Ivatloo

In this paper, a new interleaved nonisolated bidirectional zero voltage switching (ZVS) dc–dc converter by using one three-windings coupled inductor is proposed. The proposed topology can provide high step-up and high step-down conversion ratios for boost and buck operations, respectively. Moreover, because of interleaving, the proposed converter has low input current ripple at low voltage side in both buck and boost operations. The proposed converter uses lower number of switches to have bidirectional power flow in comparison with other interleaved bidirectional converters. All used switches in the proposed converter are turned on under ZVS. The advantages of the proposed converter in comparison with the conventional interleaved converters are included in the capability of bidirectional power flow, ZVS operation for all switches and high step-up and high step-down voltage gain for boost and buck operations. In this paper, the proposed converter is analyzed completely and all equations of components are extracted as well as the ZVS conditions of all switches. Moreover, a comprehensive comparison between the proposed converter and conventional topologies is presented. To verify the accuracy performance of the proposed converter, the experimental results are given.


2016 ◽  
Vol 9 (3) ◽  
pp. 546-552 ◽  
Author(s):  
Chih‐Chiang Hua ◽  
Yi‐Hsiung Fang ◽  
Chin‐Hsiung Huang

Electronics ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 983
Author(s):  
Woo-Young Choi ◽  
Min-Kwon Yang

This paper suggests a soft-switching bidirectional three-level DC–DC converter with a simple auxiliary circuit. The proposed converter uses auxiliary LC resonant circuits so that the power switches operate under a soft-switching condition. The resonant operation of the LC circuits makes power switches turn on at zero voltage, eliminating the turn-on switching power losses. The proposed converter improves the power efficiency, not using complex power switching circuits, but using simple LC resonant circuits. The operation of the proposed converter is described according to its operation modes. Experimental results for a 1.0 kW prototype are discussed to verify its performance. The proposed converter achieved the power efficiencies of 97.7% in the step-up mode and 97.8% in the step-down mode, respectively, for the rated load condition.


Sign in / Sign up

Export Citation Format

Share Document