Numerical Analysis of the Joule Heating Effect on Plasma Heat Transfer

1978 ◽  
Vol 6 (1) ◽  
pp. 33-42 ◽  
Author(s):  
A. Kanzawa ◽  
E. Pfender
Author(s):  
Saeid Movahed ◽  
Reza Kamali ◽  
Mohammad Eghtesad

The past decade has seen tremendous growth in areas of micro- and nano-fluidics, and MEMs flow control. Nowadays, there is considerable interest in micro- and nano/technologies consisting of small structures in contact with liquid media. By increasing the motivations of using miniaturized devices such as MEMS and NEMS and inventing new methods of their manufacturing, the inspirations of their study and analysis have been increased more and more. One of the most important characteristics of these devices which have undeniable impacts on their performances is miniaturized-channel flow field. By decreasing the dimensions of channels, the influence of surface effects becomes prominent and cannot be ignored. One of the most charismatic categories of these phenomena is elecrokinetic effect which can results in electroosmotic flow field (EOF) that has many advantages such as being vibration free, being much more compact, having flat-form velocity and etc. These beneficiaries lead to the increasing stimulus of using this type of flow field. One of the most important disadvantages of EOF is the Joule heating effect, the generation of heat due to the electroosmosis effect. Besides, miniaturized-channels are usually used as heat sink in miniaturized devices. By considering these facts, it can be concluded that heat characteristics of EOF must be studied carefully in order to manage the Joule heating effect and to utilize the cooling characteristics of miniaturized-channels. By reviewing the studies that have been performed in this field of study, it can be concluded that there is not any analytical approaches in dealing with heat transfer of EOF in miniaturized-channels though analytical formulas are completely essential for investigating, monitoring and controlling of any systems. In this regards, having some analytical studies on heat transfer analysis of miniaturized-channel flow field is completely essential. In the present study, by using the Schwartz-Christoffel mapping, an analytical tactic will be proposed in order to find electroosmotic velocity and consequently temperature distribution of EOF in micro- and transitional nano-channels.


2017 ◽  
Vol 101 ◽  
pp. 96-105 ◽  
Author(s):  
Hyun-Woo Jung ◽  
Seung-Jae Kim ◽  
Yun-Jae Kim ◽  
Jung-Yup Kim ◽  
Joo-Yul Lee ◽  
...  

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
C. Ahamed Saleel ◽  
Saad Ayed Alshahrani ◽  
Asif Afzal ◽  
Maughal Ahmed Ali Baig ◽  
Sarfaraz Kamangar ◽  
...  

PurposeJoule heating effect is a pervasive phenomenon in electro-osmotic flow because of the applied electric field and fluid electrical resistivity across the microchannels. Its effect in electro-osmotic flow field is an important mechanism to control the flow inside the microchannels and it includes numerous applications.Design/methodology/approachThis research article details the numerical investigation on alterations in the profile of stream wise velocity of simple Couette-electroosmotic flow and pressure driven electro-osmotic Couette flow by the dynamic viscosity variations happened due to the Joule heating effect throughout the dielectric fluid usually observed in various microfluidic devices.FindingsThe advantages of the Joule heating effect are not only to control the velocity in microchannels but also to act as an active method to enhance the mixing efficiency. The results of numerical investigations reveal that the thermal field due to Joule heating effect causes considerable variation of dynamic viscosity across the microchannel to initiate a shear flow when EDL (Electrical Double Layer) thickness is increased and is being varied across the channel.Originality/valueThis research work suggest how joule heating can be used as en effective mechanism for flow control in microfluidic devices.


2016 ◽  
Vol 78 (8-4) ◽  
Author(s):  
Ummikalsom Abidin ◽  
Jumril Yunas ◽  
Burhanuddin Yeop Majlis

Joule heating effect is substantial in an electromagnet system due to high density current from current-carrying conductor for high magnetic field generation. In Lab-on-chip (LoC) Magnetically Activated Cell Sorting (MACS) device, Joule heating effect generating high temperature and affecting the biological cells viability is investigated. The temperature rise of the integrated system was measured using resistance temperature detector, RTD Pt100. Three temperature rise conditions which are from the bare spiral-shaped magnet wire, the combination of magnet wire and on-chip magnetic core and combination of magnet wire, on-chip magnetic core and 150 mm polydimethylsiloxane (PDMS) layer have been investigated.  The combination of electromagnet of spiral-shaped magnet wire coil and on-chip magnetic core has reduced the temperature significantly which are, ~ 38 %  and ~ 26 % with magnet wire winding, N = 10 (IDC = 3.0 A, t = 210 s) and N = 20 (IDC = 2.5 A, t = 210 s) respectively. The reduced Joule heating effect is expected due to silicon chip of high thermal conductivity material enable fast heat dissipation to the surrounding.  Therefore, the integration of electromagnet system and on-chip magnetic core has the potential to be used as part of LoC MACS system provided the optimum operating conditions are determined


Sign in / Sign up

Export Citation Format

Share Document