Custom Made Device for Removal of Removable Partial Denture in a Patient with Manual Impairment

2022 ◽  
Author(s):  
Foteini Touloumi ◽  
Shivani Suvarna ◽  
Catherine M. Florentine ◽  
Thomas D. Taylor
2013 ◽  
Vol 14 (6) ◽  
pp. 1049-1053
Author(s):  
Gülsen Can ◽  
Baransel Özmumcu ◽  
Pinar Altinci

ABSTRACT Aim To investigate the importance of attachment types on the retention loss of extracoronal attachment-retained removable partial dentures depending on the usage period. Materials and methods In order to observe the retention loss of 5 different attachments (OT Strategy, OT Strategy-metal protected, Vario-stud-snap and Vario-soft 3 and ERA-RV) over time, attachment-retained partial dentures representing Kennedy II mod. I case were placed in a custom-made, retention test machine. For each minute, eight separating and joining movements were performed and retention values (Newton) of the attachments were recorded by computer. The retention tests implemented in 540,1080 and 2160 cycles. The data were evaluated statistically according to the two-way ANOVA and Tukey parametrical tests. Results The slide type attachment providing the best retention force was observed to be the most worn out by this process (p < 0.01) while the ball type attachments, which typically have the lesser retention force, showed less retention loss (p < 0.01). Conclusion It can be concluded that the retention attributes of the attachment-retained dentures were affected by the specific type of precision attachment as well as the usage period. Clinical significance Precision attachments with ball-type plastic matrices may be recommended for the clinical use due to their retention stability over time. How to cite this article Can G, Özmumcu B, Altinci P. In vitro Retention Loss of Attachment-retained Removable Partial Denture. J Contemp Dent Pract 2013;14(6):1049-1053.


2020 ◽  
Vol 29 (02) ◽  
pp. 66-70
Author(s):  
Muhammad Farhan Khan ◽  
◽  
Fatima Naseem Ahmed Khan ◽  
Muneeb Ahmed Lone ◽  
Muhammad Waqar Hussain ◽  
...  

Author(s):  
Tasuku Yoshimoto ◽  
Yoko Hasegawa ◽  
Simonne Salazar ◽  
Satsuki Kikuchi ◽  
Kazuhiro Hori ◽  
...  

(1) Background: The degree of satisfaction with dental treatment varies among patients, and the discrepancy may exist between the patient’s subjective evaluation and the objective assessment. Further, the optimal methods for increasing patient satisfaction with mastication remain unclear. This study aimed to identify factors affecting masticatory satisfaction in patients with removable partial dentures. (2) Methods: A total of 132 participants (71.0 ± 9.0 years) were included. Masticatory satisfaction was assessed on a visual analog scale. An oral health survey was conducted to assess the number of functional teeth, missing tooth classification: Kennedy classification, occlusal support: Eichner classification, and removable partial dentures wearing jaw. Objective masticatory performance was assessed using gummy jelly, while subjective masticatory ability was assessed using food acceptance status and oral health-related quality of life. The associations of these factors with masticatory satisfaction were assessed. (3) Results: Masticatory satisfaction among removable partial denture wearers was not significantly associated with gender, age, denture wearing jaw, Kennedy classification, and occlusal support. The degree of masticatory satisfaction was significantly greater with higher levels of masticatory function: masticatory performance, food acceptance score, and OHIP-14 score. The OHIP-14 score was the only significant explanatory variable for masticatory satisfaction in the multiple regression analysis; the strongest associations were with the “psychological discomfort” and “physical disability” subscales (p = 0.02 and p = 0.005, respectively). (4) Conclusions: Masticatory satisfaction among removable partial denture wearers was strongly associated with oral health-related quality of life, in which the ability to eat meals comfortably with removable partial dentures is the most important determinant of masticatory satisfaction.


2021 ◽  
Author(s):  
Frank I. Gentz ◽  
Daniel I. Brooks ◽  
Peter C. Liacouras ◽  
Anton Petrich ◽  
Christopher M. Hamlin ◽  
...  

2014 ◽  
Vol 658 ◽  
pp. 389-394
Author(s):  
Oana Cella Andrei ◽  
Livia Alice Tanasescu ◽  
Ruxandra Margarit ◽  
Mircea Horia Tierean

The paper presents the study of the stresses and the displacements that appear in different areas of the removable partial denture (RPD) with extracoronal attachments under occlusal loading, using FEA. The first step was to create the 3D model of a RPD with ball attachments in case of a class I Kennedy edentulous patient with all six anterior teeth as abutments. All materials were considered homogeneous, isotropic and having linear elasticity. There were assumed two types of constraints: in the first one the model is fixed under the action of the mastication forces; in the second one the rotational movement of the denture’s saddles in the sagittal plane was simulated, towards the edentulous ridge. In the first case, the 3D model and FEA were developed using Autodesk Inventor 2013 software. In the second case, the FEA was done using Autodesk Algor Simulation software. The loading of the model was symmetrically applied, considering the magnitude of the tangential and normal oral forces determined by Las Casas et al. These forces were applied to all the PM1, PM2, M1 and M2 pairs. Each loading case was analysed separately. The results of the two constrain situations are presented graphically, comparatively and show that the amount of the saddle displacement depends on the application area of the mastication force. Maximum displacement was computed at the application of the mastication forces on the M2 and decreases as the force is applied more mesial. The amount of the major connector’s deformation is very little influenced by the site of the force. The largest displacement of the denture was recorded at the distal end of the saddle, with values ​​that depend on the site of the forces. The existence of the rotational movement of the denture’s free end saddles in the sagittal plane, towards the edentulous ridge, changes the values ​​of accumulated stresses in denture during mastication and its Von Mises stress peaks. This analysis can be use to establish the principles of planning and designing the RPD with ball attachments having in mind to minimize the number of repairs caused by fractures of the components.


Sign in / Sign up

Export Citation Format

Share Document