scholarly journals Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

2019 ◽  
Vol 11 (5) ◽  
pp. 914-920 ◽  
Author(s):  
Peng‐fei Lei ◽  
Shi‐long Su ◽  
Ling‐yu Kong ◽  
Cheng‐gong Wang ◽  
Da Zhong ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Mixed Reality ◽  
Three Dimensional ◽  
Printing Technology ◽  
Case Presentation ◽  
Three Dimensional Printing ◽  
Total Hip ◽  
Dimensional Printing

scholarly journals Advances and innovations in total hip arthroplasty

SICOT-J ◽  
2021 ◽  
Vol 7 ◽  
pp. 26
Author(s):  
Andreas Fontalis ◽  
Jean-Alain Epinette ◽  
Martin Thaler ◽  
Luigi Zagra ◽  
Vikas Khanduja ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Three Dimensional ◽  
Young Patients ◽  
Cost Effective ◽  
Patient Specific ◽  
Three Dimensional Printing ◽  
Total Hip ◽  
Patient Specific Instrumentation ◽  
Dimensional Printing

Total hip arthroplasty (THA) has been quoted as one of the most successful and cost-effective procedures in Orthopaedics. The last decade has seen an exponential rise in the number of THAs performed globally and a sharp increase in the percentage of young patients hoping to improve their quality of life and return to physically demanding activities. Hence, it is imperative to review the various applications of technology in total hip arthroplasty for improving outcomes. The development of state-of-the-art robotic technology has enabled more reproducible and accurate acetabular positioning, while long-term data are needed to assess its cost-effectiveness. This opinion piece aims to outline and present the advances and innovations in total hip arthroplasty, from virtual reality and three-dimensional printing to patient-specific instrumentation and dual mobility bearings. This illustrates and reflects the debate that will be at the centre of hip surgery for the next decade.

Three-dimensional printing for preoperative planning of total hip arthroplasty revision: case report

2016 ◽  
Vol 45 (10) ◽  
pp. 1431-1435 ◽  
Author(s):  
Joseph Zerr ◽  
Yonatan Chatzinoff ◽  
Rajiv Chopra ◽  
Kenneth Estrera ◽  
Avneesh Chhabra
Keyword(s):  
Case Report ◽  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Preoperative Planning ◽  
Three Dimensional ◽  
Three Dimensional Printing ◽  
Total Hip ◽  
Dimensional Printing ◽  
Arthroplasty Revision

Intrapelvic component retrieval via anterior inferior iliac spine osteotomy in revision total hip arthroplasty

2018 ◽  
Vol 29 (2) ◽  
pp. 222-225
Author(s):  
William Stickney ◽  
Richard S Yoon ◽  
Jay N Patel ◽  
David S Klein ◽  
George J Haiduekwych ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Anterior Inferior Iliac Spine ◽  
Single Exposure ◽  
Component Retrieval ◽  
Case Presentation ◽  
Total Hip ◽  
Revision Reconstruction ◽  
Acetabular Components

Introduction: In the revision setting, intrapelvic acetabular components provide a unique set of challenges for the treating surgeon. Retrieval is complicated by complex anatomical relationships within the pelvis and historically, surgeons have used multiple approaches to safely retrieve the cup. Case presentation: We present the case of a 53-year-old female with intrapelvic migration of the acetabular components of her total hip arthroplasty. Patient was treated through a novel, single incision approach with utilisation of an anterior inferior iliac spine (AIIS) osteotomy. Results: An AIIS osteotomy allows for improved visualisation within the pelvis and safe retrieval through a single exposure without compromising the ability to perform definitive, revision reconstruction. At 1-year follow-up, the patient has had no complications related to infection or failure of the implants. Ambulation is performed with the aid of a cane in the community with mild, occasional pain.

scholarly journals Characteristic of materials for the 3D printed building constructions by additive printing

2018 ◽  
Vol 222 ◽  
pp. 01013 ◽  
Author(s):  
Katarzyna Pacewicz ◽  
Anna Sobotka ◽  
Łukasz Gołek
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
New Technology ◽  
Setting Time ◽  
Three Dimensional ◽  
Construction Site ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
Materials Used ◽  
Dimensional Printing

Three dimensional printing is a promising new technology to erect construction objects. Around the world in every moment a new prototypes constructions are made by using this method. Three dimensional printing is taken into account as technology which can be used to print constructions in automated way on the Moon or Mars. The raw materials, which can be used with three dimensional printing have to fulfil basic requirements for those which are used in construction. That means that components of printing mortars are made from ingredients easily accessible in area nearby construction site and can be reusable. The cost of printing building objects due to that requirements is comparable to costs of traditional building, which are currently available. However additive techniques of printing needs a dedicated mortars for printer supplying. Characteristic for such mortars is: setting time, compressive strength, followability in the printing system, shape stability of every printed layer, controlling the hydration rate to ensure bonding with the subsequent layer, reusable capabilities, easily accessible raw materials, cost of such mixtures shouldn’t be too high in order to keep 3D printing competitive for traditional ways of building, mortar components should be recyclable and printing process should not influence negatively on an environment and people. All properties of printing mortars are determined by the device for additive application method. In this paper review of available materials used for three dimensional printing technology at construction site is presented. Presented materials were analysed in terms of requirements for building materials technology. Due to the lack of detailed information’s in available literature, regarding to the properties of raw materials, the results of this analysis may be used in the designing of new concrete mixtures for the use in three-dimensional printing technology for construction.

scholarly journals The Usefulness of Three-dimensional Computed Tomography as an Assessment of Periacetabular Osteolysis in Revision Total Hip Arthroplasty

Hip & Pelvis ◽  
2015 ◽  
Vol 27 (2) ◽  
pp. 90 ◽  
Author(s):  
Kyoung Ho Moon ◽  
Joon Soon Kang ◽  
Man Hee Won ◽  
Myoung Joo Park ◽  
Jae Hwang Choi
Keyword(s):  
Computed Tomography ◽  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Three Dimensional ◽  
Revision Total Hip Arthroplasty ◽  
Total Hip

scholarly journals Generating brain matrices for zebra finch brain sectioning using three-dimensional printing technology

2019 ◽  
Vol 327 ◽  
pp. 108399
Author(s):  
Chun-Cheng Huang ◽  
Yi-Ying Chen ◽  
Yi-Ting Fang ◽  
Yu-Chi Chen ◽  
Chih-Ming Hung
Keyword(s):  
Zebra Finch ◽  
Three Dimensional ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
Dimensional Printing
Sign in / Sign up

Export Citation Format

Share Document