Comparative Performance Analysis of 
Selected Routing Algorithms by Load Variation of 2-Dimensional Mesh Topology Based 
Network-On-Chip

2021 ◽  
Vol 20 (3) ◽  
pp. 1-6
Author(s):  
Mohammed Shaba Saliu ◽  
Muyideen Omuya Momoh ◽  
Pascal Uchenna Chinedu ◽  
Wilson Nwankwo ◽  
Aliu Daniel
Keyword(s):  
Routing Algorithm ◽  
Adaptive Routing ◽  
Injection Rate ◽  
Network On Chip ◽  
Routing Algorithms ◽  
Comparative Performance ◽  
Traffic Pattern ◽  
Mesh Topology ◽  
Similar Vein ◽  
On Chip

Network-on-Chip (NoC) has been proposed as a viable solution to the communication challenges on System-on-Chips (SoCs). As the communication paradigm of SoC, NoCs performance depends mainly on the type of routing algorithm chosen. In this paper different categories of routing algorithms were compared. These include XY routing, OE turn model adaptive routing, DyAD routing and Age-Aware adaptive routing.  By varying the load at different Packet Injection Rate (PIR) under random traffic pattern, comparison was conducted using a 4 × 4 mesh topology. The Noxim simulator, a cycle accurate systemC based simulator was employed. The packets were modeled as a Poisson distribution; first-in-first-out (FIFO) input buffer channel with a depth of five (5) flits and a flit size of 32 bits; and a packet size of 3 flits respectively. The simulation time was 10,000 cycles. The findings showed that the XY routing algorithm performed better when the PIR is low.  In a similar vein, the DyAD routing and Age-aware algorithms performed better when the load i.e. PIR is high.

YaNoC: Yet Another Network-on-Chip Simulation Acceleration Engine Supporting Congestion-Aware Adaptive Routing Using FPGAs

2019 ◽  
Vol 28 (12) ◽  
pp. 1950202 ◽  
Author(s):  
Khyamling Parane ◽  
B. M. Prabhu Prasad ◽  
Basavaraj Talawar
Keyword(s):  
Design Space Exploration ◽  
Routing Algorithm ◽  
Adaptive Routing ◽  
Network On Chip ◽  
Routing Algorithms ◽  
Tree Topology ◽  
Traffic Pattern ◽  
Mesh Topology ◽  
On Chip ◽  
Congestion Aware

Many-core systems employ the Network on Chip (NoC) as the underlying communication architecture. To achieve an optimized design for an application under consideration, there is a need for fast and flexible NoC simulator. This paper presents an FPGA-based NoC simulation acceleration framework supporting design space exploration of standard and custom NoC topologies considering a full set of microarchitectural parameters. The framework is capable of designing custom routing algorithms, various traffic patterns such as uniform random, transpose, bit complement and random permutation are supported. For conventional NoCs, the standard minimal routing algorithms are supported. For designing the custom topologies, the table-based routing has been implemented. A custom topology called diagonal mesh has been evaluated using table-based and novel shortest path routing algorithm. A congestion-aware adaptive routing has been proposed to route the packets along the minimally congested path. The congestion-aware adaptive routing algorithm has negligible FPGA area overhead compared to the conventional XY routing. Employing the congestion-aware adaptive routing, network latency is reduced by 55% compared to the XY routing algorithm. The microarchitectural parameters such as buffer depth, traffic pattern and flit width have been varied to observe the effect on NoC behavior. For the [Formula: see text] mesh topology, the LUT and FF usages will be increased from 32.23% to 34.45% and from 12.62% to 15% considering the buffer depth of 4 and flit widths of 16 bits, and 32 bits, respectively. Similar behavior has been observed for other configurations of buffer depth and flit width. The torus topology consumes 24% more resources than the mesh topology. The 56-node fat tree topology consumes 27% and 2.2% more FPGA resources than the [Formula: see text] mesh and torus topologies. The 56-node fat tree topology with buffer depth of 8 and 16 flits saturates at the injection rates of 40% and 45%, respectively.

scholarly journals Design of TTL Based Routing Algorithm on UTAR Network on Chip Communication Architecture

2018 ◽  
Vol 5 (1) ◽  
pp. 54-57
Author(s):  
Wahyudi Khusnandar ◽  
Fransiscus Ati Halim ◽  
Felix Lokananta
Keyword(s):  
Communication Network ◽  
Routing Protocol ◽  
Routing Algorithm ◽  
Adaptive Routing ◽  
Network On Chip ◽  
Communication Architecture ◽  
Traffic Pattern ◽  
On Chip ◽  
Alternative Routes

XY adaptive routing protocol is a routing protocol used on UTAR NoC communication architecture. This routing algorithm adapts shrotest-path first algorithm, which will forward will not be able to work optimally if the closest route no longer have enough bandwidth to continue the packet. Packet will be stored inside the router and forwarded to the nearest router when closest route has enough bandwidth. This paper suggest TTL based routing algorithm to resolve this issue. TTL based routing algorithm adapts XY adaptive routing protocol by adding several parameters on RTL UTAR NoC and additional bit in each packet sent by router. This additional bit and parameter will be used by TTL based algorithm as additional factors in choosing alternative routes inside the communication architecture. Use of TTL on TTL based routing different from use of TTL on communication network. Packets that carry TTL value that equal to Maximum TTL will be route using XY adaptive routing protocol. TTL based routing algorithm has shown better performance compared to XY adaptive routing on some of the experiment done using MSCL NoC Traffic Pattern Suite. This research also proves that TTL based routing algorithm cannot work optimally on small-scaled architecture.

A Novel Adaptive Routing Algorithm for Network-On-Chip

2011 ◽  
Vol 474-476 ◽  
pp. 413-416
Author(s):  
Jia Jia ◽  
Duan Zhou ◽  
Jian Xian Zhang
Keyword(s):  
Routing Algorithm ◽  
Adaptive Routing ◽  
Network On Chip ◽  
Experimental Results ◽  
Average Latency ◽  
On Chip

In this paper, we propose a novel adaptive routing algorithm to solve the communication congestion problem for Network-on-Chip (NoC). The strategy competing for output ports in both X and Y directions is employed to utilize the output ports of the router sufficiently, and to reduce the transmission latency and improve the throughput. Experimental results show that the proposed algorithm is very effective in relieving the communication congestion, and a reduction in average latency by 45.7% and an improvement in throughput by 44.4% are achieved compared with the deterministic XY routing algorithm and the simple XY adaptive routing algorithm.

Network-on-Chip Especially for Video Coding Applications Using Multilayer Mesh Topology

2019 ◽  
Vol 12 (3) ◽  
pp. 247-256
Author(s):  
Kamel Messaoudi ◽  
Salah Toumi ◽  
El-Bay Bourennane
Keyword(s):  
Video Coding ◽  
Communication System ◽  
Data Transfer ◽  
Routing Algorithm ◽  
Network On Chip ◽  
Mesh Topology ◽  
Global Interconnects ◽  
And Performance ◽  
On Chip ◽  
Scalable Communication

Background: Network on chip is proposed as new reusable and scalable communication system for applications with important number of IPs. The NoC architecture characteristics are based on several factors: the implementation strategy of IPs, the power dissipation, the placement of IPs, data transfer time, the requirements of the given application, etc. The N×M Mesh topology combined with the XY routing algorithm are generally chosen in many studies. Hardware IPs proposed in the literature, for various applications as example video encoders, operates at different frequencies and generally implemented according to several strategies and different bus sizes. Connecting these IPs using the same communication system is very difficult. Methods: In this paper, we present a new topology based on multi-layer mesh topology and adapted for video coding applications. The proposed topology exploits the video coding information regarding groups of cores that communicate through two cores only. The idea is to use a specific NoC for each group of cores and connect the NoCs with bridge in the positions of two communication cores. The choice of parameters in each NoC depends on the characteristic of IPs in the same group in order to maximize communication adaptivity and performance. Results: Synthesis results show that the proposed multi-layer mesh topology NoC uses much less resources than the traditional NxM mesh topology NoC. Conclusion: This reduction in term of resources is assured by the considerable reduction in the length and number of global interconnects, resulting in an increase in the performance and decrease in the power consumption and area of wire limited circuits.

Sign in / Sign up

Export Citation Format

Share Document