scholarly journals BENDING AND CRUMPLING DEFORMATION STUDY OF THE RESONANT CHARACTERISTIC AND SAR FOR A 2.4 GHZ TEXTILE ANTENNA

2015 ◽  
Vol 77 (10) ◽  
Author(s):  
Norfatin Akma Elias ◽  
Noor Asmawati Samsuri ◽  
Mohamad Kamal A Rahim ◽  
Chinthana Panagamuwa ◽  
Will Whittow

Over recent years, there has been an explosive growth of interest in the development of flexible wearable antennas due to rapid growth in Wireless Body Area Network (WBAN) applications. However, the antenna is subjected to deformation when being worn by users. Therefore, it is compulsory to analyze the absorption of electromagnetic (EM) radiation and the antenna performances as a function of the deformation conditions since the antenna is not in its normal flat conditions anymore. In this paper, two types of deformations; bending and crumpling are analyzed by means of CST Microwave Studio. The peak SAR10g demonstrates increment up to 65.7 % and 48.7 % under bending and crumpling deformation respectively. Moreover, the crumpling is more sensitive to the geometrical shape and composition of the exposed body area if compared to bending. Moreover, the detuning effects of the resonant frequency are more significant for crumpling cases.

2013 ◽  
Vol 138 ◽  
pp. 613-627 ◽  
Author(s):  
Mohd Ilman Jais ◽  
Mohd Faizal Bin Jamlos ◽  
Muzammil Jusoh ◽  
Thennarasan Sabapathy ◽  
Muhammad Ramlee Kamarudin ◽  
...  

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 322
Author(s):  
Sarmad Nozad Mahmood ◽  
Asnor Juraiza Ishak ◽  
Tale Saeidi ◽  
Azura Che Soh ◽  
Ali Jalal ◽  
...  

Wireless body area network (WBAN) applications have broad utility in monitoring patient health and transmitting the data wirelessly. WBAN can greatly benefit from wearable antennas. Wearable antennas provide comfort and continuity of the monitoring of the patient. Therefore, they must be comfortable, flexible, and operate without excessive degradation near the body. Most wearable antennas use a truncated ground, which increases specific absorption rate (SAR) undesirably. A full ground ultra-wideband (UWB) antenna is proposed and utilized here to attain a broad bandwidth while keeping SAR in the acceptable range based on both 1 g and 10 g standards. It is designed on a denim substrate with a dielectric constant of 1.4 and thickness of 0.7 mm alongside the ShieldIt conductive textile. The antenna is fed using a ground coplanar waveguide (GCPW) through a substrate-integrated waveguide (SIW) transition. This transition creates a perfect match while reducing SAR. In addition, the proposed antenna has a bandwidth (BW) of 7–28 GHz, maximum directive gain of 10.5 dBi and maximum radiation efficiency of 96%, with small dimensions of 60 × 50 × 0.7 mm3. The good antenna’s performance while it is placed on the breast shows that it is a good candidate for both breast cancer imaging and WBAN.


Author(s):  
Shilpa Shinde ◽  
Santosh Sonavane

Background and objective: In the Wireless Body Area Network (WBAN) sensors are placed on the human body; which has various mobility patterns like seating, walking, standing and running. This mobility typically assisted with hand and leg movements on which most of the sensors are mounted. Previous studies were largely focused on simulations of WBAN mobility without focusing much on hand and leg movements. Thus for realistic studies on performance of the WBAN, it is important to consider hand and leg movements. Thus, an objective of this paper is to investigate an effect of the mobility patterns with hand movements on the throughput of the WBAN. Method: The IEEE 802.15.6 requirements are considered for WBAN design. The WBAN with star topology is used to connect three sensors and a hub. Three types of mobility viz. standing, walking and running with backward and forward hand movements is designed for simulation purpose. The throughput analysis is carried out with the three sets of simulations with standing, walking and running conditions with the speed of 0 m/s, 0.5 m/s and 3 m/s respectively. The data rate was increased from 250 Kb to 10000 Kb with AODV protocol. It is intended to investigate the effect of the hand movements and the mobility conditions on the throughput. Simulation results are analyzed with the aid of descriptive statistics. A comparative analysis between the simulated model and a mathematical model is also introduced to get more insight into the data. Results: Simulation studies showed that as the data rate is increased, throughput is also increased for all mobility conditions however, this increasing trend was discontinuous. In the standing (static) position, the throughput is found to be higher than mobility (dynamic) condition. It is found that, the throughput is better in the running condition than the walking condition. Average values of the throughput in case of the standing condition were more than that of the dynamic conditions. To validate these results, a mathematical model is created. In the mathematical model, a same trend is observed. Conclusion: Overall, it is concluded that the throughput is decreased due to mobility of the WBAN. It is understood that mathematical models have given more insight into the simulation data and confirmed the negative effect of the mobility conditions on throughput. In the future, it is proposed to investigate effect of interference on the designed network and compare the results.


Author(s):  
Suthisa Kesorn ◽  
Norakamon Wongsin ◽  
Thinnawat jangjing ◽  
Chatree Mahatthanajatuphat ◽  
Paitoon Rakluea

Sign in / Sign up

Export Citation Format

Share Document