scholarly journals Experiment-Based Preliminary Design Guidelines for Consideration of Profile Vortex Shedding From Low-Speed Axial Fan Blades

2021 ◽  
Author(s):  
Janos Vad ◽  
Gabor Daku
Keyword(s):  
Vortex Shedding ◽  
Design Guidelines ◽  
Preliminary Design ◽  
Axial Fan ◽  
Low Speed

scholarly journals Experiment-Based Preliminary Design Guidelines for Consideration of Profile Vortex Shedding From Low-Speed Axial Fan Blades

2021 ◽  
Vol 143 (6) ◽  
Author(s):  
Gábor Daku ◽  
János Vad
Keyword(s):  
Vortex Shedding ◽  
Design Guidelines ◽  
Preliminary Design ◽  
Axial Fan ◽  
Noise Emission ◽  
Blade Vibration ◽  
Low Speed ◽  
Blunt Trailing Edge ◽  
Axial Fans ◽  
Semi Empirical

Abstract This paper presents hot-wire measurements in a wind tunnel, close downstream of basic models of blade sections being representative for low-speed, low-Reynolds number axial fans, in order to explore the signatures of vortex shedding (VS) from the blade profiles. Using the Rankine-type vortex approach, an analytical model was developed on the velocity fluctuation represented by the vortex streets, as an aid in evaluating the experimental data. The signatures of profile VS were distinguished from blunt trailing-edge VS based on Strouhal numbers obtained from the measurements in a case-specific manner. Utilizing the experimental results, the semi-empirical model available in the literature for predicting the frequency of profile VS was extended to low-speed axial fan applications. On this basis, quantitative guidelines were developed for the consideration of profile VS in preliminary design of axial fans in the moderation of VS-induced blade vibration and noise emission.

scholarly journals Experiment-Based Preliminary Design Guidelines for Consideration of Profile Vortex Shedding From Low-Speed Axial Fan Blades

2020 ◽  
Author(s):  
Gábor Daku ◽  
János Vad
Keyword(s):  
Vortex Shedding ◽  
Design Guidelines ◽  
Preliminary Design ◽  
Axial Fan ◽  
Noise Emission ◽  
Blade Vibration ◽  
Low Speed ◽  
Blunt Trailing Edge ◽  
Axial Fans ◽  
Semi Empirical

Abstract The paper presents hot wire measurements in a wind tunnel, close downstream of basic models of blade sections being representative for low-speed, low-Reynolds-number axial fans, in order to explore the signatures of vortex shedding (VS) from the blade profiles. Using the Rankine-type vortex approach, an analytical model was developed on the velocity fluctuation represented by the vortex streets, as an aid in evaluating the experimental data. The signatures of profile VS were distinguished from blunt-trailing-edge VS based on Strouhal numbers obtained from the measurements in a case-specific manner. Utilizing the experimental results, the semi-empirical model available in the literature for predicting the frequency of profile VS was extended to low-speed axial fan applications. On this basis, quantitative guidelines were developed for consideration of profile VS in preliminary design of axial fans in moderation of VS-induced blade vibration and noise emission.

scholarly journals Preliminary Design Guidelines for Considering the Vibration and Noise of Low-Speed Axial Fans Due to Profile Vortex Shedding

2022 ◽  
Vol 7 (1) ◽  
pp. 2
Author(s):  
Gábor Daku ◽  
János Vad
Keyword(s):  
Vortex Shedding ◽  
Design Method ◽  
Axial Flow ◽  
Design Guidelines ◽  
Worst Case ◽  
Low Speed ◽  
Increased Risk ◽  
Axial Fans ◽  
Fan Blade ◽  
Set Up

This paper presents a critical overview on worst-case design scenarios for which low-speed axial flow fans may exhibit an increased risk of blade resonance due to profile vortex shedding. To set up a design example, a circular-arc-cambered plate of 8% relative curvature is investigated in twofold approaches of blade mechanics and aerodynamics. For these purposes, the frequency of the first bending mode of a plate of arbitrary circular camber is expressed by modeling the fan blade as a cantilever beam. Furthermore, an iterative blade design method is developed for checking the risky scenarios for which spanwise and spatially coherent shed vortices, stimulating pronounced vibration and noise, may occur. Coupling these two approaches, cases for vortex-induced blade resonance are set up. Opposing this basis, design guidelines are elaborated upon for avoiding such resonance. Based on the approach presented herein, guidelines are also developed for moderating the annoyance due to the vortex shedding noise.

scholarly journals Profile vortex shedding from low-speed axial fan rotor blades: a modelling overview

2021 ◽  
pp. 095765092110268
Author(s):  
Gábor Daku ◽  
János Vad
Keyword(s):  
Vortex Shedding ◽  
Empirical Model ◽  
Rotor Blades ◽  
Evaluation Methodology ◽  
Future Research ◽  
Axial Fan ◽  
Low Speed ◽  
Simplifying Assumptions ◽  
Set Up ◽  
Semi Empirical

This paper presents an overview of the characteristics potentially influencing the profile vortex shedding (PVS) phenomenon being relevant in noise and vibration of low-speed axial fan rotor blades. Dimensional analysis has been applied to explore the essential dimensionless quantities in a systematic and comprehensive manner. On this basis, limitations have been established, and simplifying assumptions have been set up in terms of PVS investigation. Groups of dimensionless characteristics playing a role in the semi-empirical model for predicting the PVS frequency were identified. The available semi-empirical model and its unique features related to the measurement evaluation methodology and Reynolds number dependence have been outlined. The presented comprehensive analysis provides guidelines from the perspective of transferability of the literature data on PVS from steady, isolated blade profile models to low-speed axial fan rotors. It also results in the formulation of objectives of future research related to PVS.

scholarly journals Assessment of Steady and Unsteady Full Annulus Simulations Predictivity for a Low-Speed Axial Fan at Load-Controlled Windmill

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Aurélie Ortolan ◽  
Suk-Kee Courty-Audren ◽  
Nicolas Binder ◽  
Xavier Carbonneau ◽  
Yannick Bousquet ◽  
...  
Keyword(s):  
Numerical Analysis ◽  
Velocity Field ◽  
Detailed Analysis ◽  
Added Value ◽  
Classical Approach ◽  
Axial Fan ◽  
Low Speed ◽  
Unsteady Simulation ◽  
Temporal Periodicity

A steady mixing plane approach is compared with the time-averaged solution of an unsteady full annulus calculation for a conventional fan operating at load-controlled windmill. The objective is to assess the added value of a complete unsteady calculation compared with a more classical approach, especially concerning the effect of the spatial and temporal periodicity release in such an unusual operation as windmill. Experiment with global steady measurements and rotor radial characterizations was conducted. Numerical analysis demonstrates that windmilling global performances obtained with the time-averaged solution of the unsteady simulation are not far different from the steady case, especially in the rotor. Some differences arise in the stator, particularly regarding the velocity field. Temporal periodicity release in this row has clearly a significant effect on the flow unsteady response. A detailed analysis highlights that generic patterns of windmilling flows recorded on a steady approach are also reported on the unsteady case.

The development of design guidelines for integrally stiffened panels under compression using surrogate modelling

2017 ◽  
Vol 233 (3) ◽  
pp. 779-792
Author(s):  
Morteza Dezyani ◽  
Shahram Yousefi ◽  
Hossein Dalayeli ◽  
Hamid Frrokhfal
Keyword(s):  
Finite Element ◽  
Global Optimum ◽  
Initial Guess ◽  
Design Guidelines ◽  
Programming Algorithm ◽  
Preliminary Design ◽  
Finite Element Analyses ◽  
Surrogate Modelling ◽  
Stiffened Panels ◽  
Integrally Stiffened Panels

Preliminary design of stiffened compression panels used in aerospace structures is commonly based on the routine analytical and semi-empirical equations. Empirical charts are used for obtaining an initial guess to start the preliminary design process. In this paper, preliminary design guidelines for stiffened compression panels are developed based on the non-linear finite element analyses. Meanwhile, the process of design and optimization of the stiffened compression panels are carried out. Modelling phase is based on the finite element simulations of the structure. The surrogate modelling technique is employed to reduce the number of finite element analyses. An efficient technique is developed to find the global optimum of the surrogate model using sequential quadratic programming algorithm. The proposed approach is applied to two types of integrally stiffened panels. The final results are extracted as practical design guidelines which are suitable for preliminary design phase.

Influence of Circumferential Inflow Distortion on the Performance of a Low Speed, High Aspect Ratio Contra Rotating Axial Fan

2014 ◽  
Vol 136 (7) ◽  
Author(s):  
Chetan Mistry ◽  
A. M. Pradeep
Keyword(s):  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Rotational Speed ◽  
Total Pressure ◽  
Flow Behavior ◽  
Axial Fan ◽  
Low Speed ◽  
Overall Performance ◽  
Design Speed ◽  
Inflow Conditions

The influence of circumferential inflow distorted on the performance and flow behavior of a high aspect ratio, low speed contra rotating fan is reported in this paper. The total pressure at the inlet is artificially distorted by means of 90 deg mesh sector with a porosity of 0.70. The performance of the contra rotating fan was studied under different speed combinations of the two rotors under clean and distorted inflow conditions. Detailed flow analyses were conducted under design and off-design conditions. In order to understand the effect of distortion and its extent, the distortion sector was rotated circumferentially at intervals of 15 deg to cover the entire annulus. Detailed measurements of the total pressure, velocity components, and flow angles were carried out at the inlet of the first rotor, between the two rotors, and at the exit of the second rotor. The study reveals a few interesting aspects on the effect of inflow distortion on the performance of a contra-rotating stage. For the design speed combination and lower rotational speed of rotor-2, a reduction in the overall operating range with a shift of the peak pressure point towards higher mass flow rate, was observed. It is observed that the effect of inflow distortion at the inlet of rotor-1 gets transferred in the direction of rotor-1 rotation and spreads across the entire annulus. The opposite sense of rotation of rotor-2 causes the distortion effect to get transferred in the direction of rotation of rotor-2 with an associated reduction in the total pressure near the hub. It is observed that a higher rotational speed of the second rotor has a beneficial effect on the overall performance due to the strong suction by generated higher rotational speed of rotor-2.

Sign in / Sign up

Export Citation Format

Share Document