Transient Flow Patterns and Pressures Characteristics in a Hydrostatic Pocket

1994 ◽  
Vol 116 (1) ◽  
pp. 139-146 ◽  
Author(s):  
M. J. Braun ◽  
Y. M. Zhou ◽  
F. K. Choy
Keyword(s):  
Transient Flow ◽  
Stokes Equations ◽  
Flow Patterns ◽  
Time Dependent ◽  
Staggered Grid ◽  
Navier Stokes ◽  
Computational Error ◽  
Convergence Criteria ◽  
Navier Stokes Equations ◽  
Recirculating Flow

The flow in an open lid, shear flow driven cavity with a jet penetrating at its bottom is described by a mathematical model that uses the Navier-Stokes equations written in terms of the primary variables, u, v, and p. Using a time dependent conservative formulation, a finite difference method is applied through a staggered grid. The power law scheme is used in the treatment of the convective terms for this highly recirculating flow. The time dependent numerical experiments use both geometric (α = d/l, λ = c/l and γ = b/l), and dynamic similarity parameters [Reynolds number (R) and jet strength (F)] to study the development of the flow patterns, velocities, pressures and shear forces when the top plate impulsively entrains the cavity driving shear layer. The experiments are performed in two-dimensional cavities of square geometry (α = 1). The discussion pertaining to the convergence of the numerical scheme and the computational error shows that the strict convergence criteria applied to both velocities and pressures were successfully satisfied.

The Effects of a Hydrostatic Pocket Aspect Ratio, Supply Orifice Position, and Attack Angle on Steady-State Flow Patterns, Pressure, and Shear Characteristics

1993 ◽  
Vol 115 (4) ◽  
pp. 678-685 ◽  
Author(s):  
M. J. Braun ◽  
F. K. Choy ◽  
Y. M. Zhou
Keyword(s):  
Stokes Equations ◽  
Staggered Grid ◽  
Navier Stokes ◽  
Computational Error ◽  
Convergence Criteria ◽  
Steady State Flow ◽  
Shear Forces ◽  
Navier Stokes Equations ◽  
Recirculating Flow ◽  
Shear Characteristics

The flow in a hydrostatic pocket is described by a mathematical model that uses the Navier-Stokes equations written in terms of the primary variables, u, v, and p. Using the conservative formulation, a finite difference method is applied through a staggered grid. The power law scheme is applied in the treatment of the convective terms for this highly recirculating flow. The discussion pertaining to the convergence of the numerical scheme and the computational error, shows that the strict convergence criteria applied to both velocities and pressure were successfully statisfied. The numerical model is applied in a parametric mode to the study of the velocities, the pressure patterns, and shear forces that characterize the flow in a square (α = 1), deep (α>1), and shallow (α≪1) hydrostatic pocket. The effects of the variation of the location and angle of the hydrostatic jet are also investigated.

Influences of Recess Geometry and Restrictor Dimension on Flow Patterns and Pressure Distribution of Hydrostatic Bearings

2007 ◽  
Author(s):  
Cheng-Hsien Chen ◽  
Yuan Kang ◽  
Yeon-Pun Chang ◽  
De-Xing Peng ◽  
Ding-Wen Yang
Keyword(s):  
Pressure Distribution ◽  
Stokes Equations ◽  
Flow Patterns ◽  
Lubricant Film ◽  
Navier Stokes ◽  
Width Ratio ◽  
Navier Stokes Equations ◽  
Hydrostatic Bearing ◽  
Lubricant Flow ◽  
Land Width

This paper studies the influences of recess geometry and restrictor dimensions on the flow patterns and pressure distribution of lubricant film, which are coupled effects of hybrid characteristics of a hydrostatic bearing. The lubricant flow is described by using the Navier-Stokes equations. The Galerkin weighted residual finite element method is applied to determine the lubricant velocities and pressure in the bearing clearance. The numerical simulations will evaluate the effects of the land-width ratio and restriction parameter as well as the influence of modified Reynolds number and the jet-strength coefficient on the flow patterns in the recess and pressure distribution in lubricant film. On the basis of the simulation drawn from this study, the simulated results are expected to help engineers make better use of the design of hydrostatic bearing and its restrictors.

scholarly journals A Code for Simulating Heat Transfer in Turbulent Channel Flow

Mathematics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 756
Author(s):  
Federico Lluesma-Rodríguez ◽  
Francisco Álcantara-Ávila ◽  
María Jezabel Pérez-Quiles ◽  
Sergio Hoyas
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Turbulent Channel Flow ◽  
Passive Scalar ◽  
Direct Numerical Simulations ◽  
Time Dependent ◽  
Navier Stokes ◽  
Thermal Flow ◽  
Navier Stokes Equations

One numerical method was designed to solve the time-dependent, three-dimensional, incompressible Navier–Stokes equations in turbulent thermal channel flows. Its originality lies in the use of several well-known methods to discretize the problem and its parallel nature. Vorticy-Laplacian of velocity formulation has been used, so pressure has been removed from the system. Heat is modeled as a passive scalar. Any other quantity modeled as passive scalar can be very easily studied, including several of them at the same time. These methods have been successfully used for extensive direct numerical simulations of passive thermal flow for several boundary conditions.

Investigation of the stability of boundary layers by a finite-difference model of the Navier—Stokes equations

1976 ◽  
Vol 78 (2) ◽  
pp. 355-383 ◽  
Author(s):  
H. Fasel
Keyword(s):  
Finite Difference ◽  
Stability Theory ◽  
Stokes Equations ◽  
Time Dependent ◽  
Linear Stability Theory ◽  
Navier Stokes ◽  
Experimental Measurements ◽  
Navier Stokes Equations ◽  
The Stability ◽  
Small Periodic

The stability of incompressible boundary-layer flows on a semi-infinite flat plate and the growth of disturbances in such flows are investigated by numerical integration of the complete Navier–;Stokes equations for laminar two-dimensional flows. Forced time-dependent disturbances are introduced into the flow field and the reaction of the flow to such disturbances is studied by directly solving the Navier–Stokes equations using a finite-difference method. An implicit finitedifference scheme was developed for the calculation of the extremely unsteady flow fields which arose from the forced time-dependent disturbances. The problem of the numerical stability of the method called for special attention in order to avoid possible distortions of the results caused by the interaction of unstable numerical oscillations with physically meaningful perturbations. A demonstration of the suitability of the numerical method for the investigation of stability and the initial growth of disturbances is presented for small periodic perturbations. For this particular case the numerical results can be compared with linear stability theory and experimental measurements. In this paper a number of numerical calculations for small periodic disturbances are discussed in detail. The results are generally in fairly close agreement with linear stability theory or experimental measurements.

Two-dimensional flow of a viscous fluid in a channel with porous walls

1991 ◽  
Vol 227 ◽  
pp. 1-33 ◽  
Author(s):  
Stephen M. Cox
Keyword(s):  
Finite Time ◽  
Stokes Equations ◽  
Pitchfork Bifurcation ◽  
Time Dependent ◽  
High Rate ◽  
Navier Stokes ◽  
Recent Theory ◽  
Navier Stokes Equations ◽  
Two Dimensional Flow ◽  
Steady Solutions

We consider the flow of a viscous incompressible fluid in a parallel-walled channel, driven by steady uniform suction through the porous channel walls. A similarity transformation reduces the Navier-Stokes equations to a single partial differential equation (PDE) for the stream function, with two-point boundary conditions. We discuss the bifurcations of the steady solutions first, and show how a pitchfork bifurcation is unfolded when a symmetry of the problem is broken.Then we describe time-dependent solutions of the governing PDE, which we calculate numerically. We analyse these unsteady solutions when there is a high rate of suction through one wall, and the other wall is impermeable: there is a limit cycle composed of an explosive phase of inviscid growth, and a slow viscous decay. The inviscid phase ‘almost’ has a finite-time singularity. We discuss whether solutions of the governing PDE, which are exact solutions of the Navier-Stokes equations, may develop mathematical singularities in a finite time.When the rates of suction at the two walls are equal so that the problem is symmetrical, there is an abrupt transition to chaos, a ‘homoclinic explosion’, in the time-dependent solutions as the Reynolds number is increased. We unfold this transition by perturbing the symmetry, and compare direct numerical integrations of the governing PDE with a recent theory for ‘Lorenz-like’ dynamical systems. The chaos is found to be very sensitive to symmetry breaking.

Sign in / Sign up

Export Citation Format

Share Document