An Appraisal of System Mean Void Fraction and Its Application for the Moving Boundary Simulation of Phase-Change Heat Exchangers

2015 ◽  
Vol 137 (12) ◽  
Author(s):  
S. P. Datta ◽  
R. K. Chandra ◽  
P. K. Das
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Void Fraction ◽  
Heat Exchangers ◽  
Moving Boundary ◽  
Transport Processes ◽  
Closed Form Expression ◽  
Two Phase ◽  
Slip Ratio ◽  
Wide Range

In gas–liquid two-phase flow, void fraction is the most unique parameter which influences all the transport processes. In the most general case, though the void fraction varies nonlinearly with the channel length, many practical simulations make use of the “system mean void fraction.” The present investigation makes a critical assessment of different system mean void fraction models for a wide range of slip velocity and density difference between the phases. To this end, different correlations for slip ratio have been considered and, for all the cases, closed form expression for the system mean void fraction has been presented. The local as well as the system mean void fractions have also been estimated numerically from a heat transfer based model. Predictions from the heat transfer based model and the slip ratio based model have been compared. As an application, the slip ratio based system mean void fraction is used in to build the moving boundary model for phase-change heat exchangers. The prediction of startup transients for both an evaporator and a condenser of an automotive air conditioning system (AACS) agrees well with the experimental results.

Rewet Temperature Correlations for Liquid Nitrogen Boiling Pipe Flows Across Varying Flow Conditions and Orientations

2019 ◽  
Vol 11 (5) ◽  
Author(s):  
S. R. Darr ◽  
J. Dong ◽  
N. Glikin ◽  
J. W. Hartwig ◽  
J. N. Chung
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Liquid Nitrogen ◽  
Heat Transfer Process ◽  
Transport Processes ◽  
Liquid Oxygen ◽  
Cryogenic Fluids ◽  
Wide Range ◽  
Leidenfrost Temperature ◽  
Phase Change Heat Transfer

In many convective liquid–vapor phase-change heat transfer engineering applications, cryogenic fluids are widely used in industrial processes, spacecraft and cryosurgery systems, and so on. For example, cryogens are usually used as liquid fuels such as liquid hydrogen, liquid methane, and liquid oxygen in the rocket industry, liquid nitrogen and helium are frequently used to cool superconducting magnetic device for medical applications. In these systems, proper transport, handling, and storage of cryogenic fluids are of extreme importance. Among all the cryogenic transport processes performed in room temperatures, quenching, also termed chilldown, is an unavoidable initial, transient phase-change heat transfer process that brings the system down to the cryogenic condition. The Leidenfrost temperature or rewet temperature that signals the end of film boiling is practically considered the completion point of a quenching process. Therefore, rewet temperature has been considered the most important parameter for the engineering design of cryogenic thermal management systems. As most of the previous correlations for predicting the Leidenfrost temperature and the rewet temperature have been developed for water, they are shown to disagree with recent liquid nitrogen pipe chilldown experiments in upward and downward flow directions over a wide range of flow rates, pressures, and degrees of inlet subcooling. In addition to a complete review of the literature, two modified correlations are presented, one based on bubble growth and another based on the theoretical maximum limit of superheat. Each correlation performs well over the entire dataset.

Visualization of Boiling Heat Transfer on Micro Porous Coated Surface in Confined Space

2013 ◽  
Author(s):  
Chien-Yuh Yang ◽  
Chien-Fu Liu
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Boiling Heat Transfer ◽  
Heat Transfer Performance ◽  
Heating Surface ◽  
Nucleate Boiling ◽  
Confined Space ◽  
Two Phase ◽  
Nucleate Boiling Heat Transfer ◽  
Coated Surface

Numerous researches have been developed for pool boiling on microporous coated surface in the past decade. The nucleate boiling heat transfer was found to be increased by up to 4.5 times than that on uncoated surface. Recently, the two-phase micro heat exchangers have been considered for high flux electronic devices cooling. The enhancement techniques for improving the nucleate boiling heat transfer performance in the micro heat exchangers have gotten more importance. Previous studies of microporous coatings, however, have been restricted to boiling in unconfined space. No studies have been made on the feasibility of using microporous coatings for enhancing boiling in confined spaces. This study provides an experimental observation of the vapor generation and leaving processes on microporous coatings surface in a 1-mm confined space. It would be helpful for understanding the mechanism of boiling heat transfer and improving the design of two-phase micro heat exchangers. Aluminum particles of average diameter 20 μm were mixed with a binder and a carrier to develop a 150 μm thickness boiling enhancement paint on a 3.0 cm by 3.0 cm copper heating surface. The heating surface was covered by a thin glass plate with a 1 mm spacer to form a 1 mm vertical narrow space for the test section. The boiling phenomenon was recorded by a high speed camera. In addition to the three boiling regimes observed by Bonjour and Lallemand [1], i.e., isolated deformed bubbles, coalesced bubbles and partial dryout at low, moderate and high heat fluxes respectively in unconfined space, a suction and blowing process was observed at the highest heat flux condition. Owing to the space confinement, liquid was sucked and vapor was expelled periodically during the bubble generation process. This mechanism significantly enhanced the boiling heat transfer performance in confined space.

Comparison of 30 Boiling and Condensation Correlations for Two-Phase Flows in Compact Plate-Fin Heat Exchangers

2017 ◽  
Author(s):  
Wenhai Li ◽  
Ken Alabi ◽  
Foluso Ladeinde
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Flow Boiling ◽  
Transfer Coefficients ◽  
Two Phase Flows ◽  
Two Phase ◽  
Heat Transfer Coefficients ◽  
Heat Exchanger Design ◽  
Micro Channels ◽  
Vertical Tubes

Over the years, empirical correlations have been developed for predicting saturated flow boiling [1–15] and condensation [16–30] heat transfer coefficients inside horizontal/vertical tubes or micro-channels. In the present work, we have examined 30 of these models, and modified many of them for use in compact plate-fin heat exchangers. However, the various correlations, which have been developed for pipes and ducts, have been modified in our work to make them applicable to extended fin surfaces. The various correlations have been used in a low-order, one-dimensional, finite-volume type numerical integration of the flow and heat transfer equations in heat exchangers. The NIST’s REFPROP database [31] is used to account for the large variations in the fluid thermo-physical properties during phase change. The numerical results are compared with Yara’s experimental data [32]. The validity of the various boiling and condensation models for a real plate-fin heat exchanger design is discussed. The results show that some of the modified boiling and condensation correlations can provide acceptable prediction of heat transfer coefficient for two-phase flows in compact plate-fin heat exchangers.

Drag Coefficient and Two-Phase Friction Multiplier on Tube Bundles Subjected to Two-Phase Cross-Flow

2012 ◽  
Vol 135 (1) ◽  
Author(s):  
W. G. Sim ◽  
Njuki W. Mureithi
Keyword(s):  
Drag Coefficient ◽  
Void Fraction ◽  
Euler Number ◽  
Tube Bundle ◽  
Cross Flow ◽  
Water Mixture ◽  
Duct Flow ◽  
Two Phase ◽  
Mass Fluxes ◽  
Wide Range

An approximate analytical model, to predict the drag coefficient on a cylinder and the two-phase Euler number for upward two-phase cross-flow through horizontal bundles, has been developed. To verify the model, two sets of experiments were performed with an air–water mixture for a range of pitch mass fluxes and void fractions. The experiments were undertaken using a rotated triangular (RT) array of cylinders having a pitch-to-diameter ratio of 1.5 and cylinder diameter 38 mm. The void fraction model proposed by Feenstra et al. was used to estimate the void fraction of the flow within the tube bundle. An important variable for drag coefficient estimation is the two-phase friction multiplier. A new drag coefficient model has been developed, based on the single-phase flow Euler number formulation proposed by Zukauskas et al. and the two-phase friction multiplier in duct flow formulated by various researchers. The present model is developed considering the Euler number formulation by Zukauskas et al. as well as existing two-phase friction multiplier models. It is found that Marchaterre's model for two-phase friction multiplier is applicable to air–water mixtures. The analytical results agree reasonably well with experimental drag coefficients and Euler numbers in air–water mixtures for a sufficiently wide range of pitch mass fluxes and qualities. This model will allow researchers to provide analytical estimates of the drag coefficient, which is related to two-phase damping.

New void fraction equations for two-phase flow in helical heat exchangers using artificial neural networks

2018 ◽  
Vol 130 ◽  
pp. 149-160 ◽  
Author(s):  
A. Parrales ◽  
D. Colorado ◽  
J.A. Díaz-Gómez ◽  
A. Huicochea ◽  
A. Álvarez ◽  
...  
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Void Fraction ◽  
Heat Exchangers ◽  
Two Phase Flow ◽  
Phase Flow ◽  
Two Phase ◽  
Artificial Neural

Phase Change Process Inside a Small-radii Cylinder Subjected to Cyclic Convective Boundary Conditions: a Numerical Study

2021 ◽  
Author(s):  
Yousef Kanani ◽  
Avijit Karmakar ◽  
Sumanta Acharya
Keyword(s):  
Heat Transfer ◽  
Surface Temperature ◽  
Phase Change ◽  
Phase Change Materials ◽  
Numerical Study ◽  
Convective Boundary Condition ◽  
Freezing Process ◽  
Fourier Number ◽  
Two Phase ◽  
Convective Boundary

Abstract We numerically investigate the melting and solidi?cation behavior of phase change materials encapsulated in a small-radii cylinder subjected to a cyclic convective boundary condition (square wave). Initially, we explore the effect of the Stefan and Biot numbers on the non-dimensionalized time required (i.e. reference Fourier number Tref ) for a PCM initially held at Tcold to melt and reach the cross?ow temperature Thot. The increase in either Stefan or Biot number decreases Tref and can be predicted accurately using a correlation developed in this work. The variations of the PCM melt fraction, surface temperature, and heat transfer rate as a function of Fourier number are reported and analyzed for the above process. We further study the effect of the cyclic Fourier number on the periodic melting and freezing process. The melting or freezing front initiates at the outer periphery of the PCM and propagates towards the center. At higher frequencies, multiple two-phase interfaces are generated (propagating inward), and higher overall heat transfer is achieved as the surface temperature oscillates in the vicinity of the melting temperature, which increases the effective temperature difference driving the convective heat transfer.

Sign in / Sign up

Export Citation Format

Share Document