scholarly journals Integrated Image-Based Computational Fluid Dynamics Modeling Software as an Instructional Tool

2020 ◽  
Vol 142 (11) ◽  
Author(s):  
Kimberly A. Stevens Boster ◽  
Melody Dong ◽  
Jessica M. Oakes ◽  
Chiara Bellini ◽  
Vitaliy L. Rayz ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Computational Modeling ◽  
Engineering Students ◽  
Integrated Modeling ◽  
Instructional Tool ◽  
Dynamics Modeling ◽  
Study Abroad Programs ◽  
Modeling Software ◽  
Computational Fluid Dynamics Cfd

Abstract Computational modeling of cardiovascular flows is becoming increasingly important in a range of biomedical applications, and understanding the fundamentals of computational modeling is important for engineering students. In addition to their purpose as research tools, integrated image-based computational fluid dynamics (CFD) platforms can be used to teach the fundamental principles involved in computational modeling and generate interest in studying cardiovascular disease. We report the results of a study performed at five institutions designed to investigate the effectiveness of an integrated modeling platform as an instructional tool and describe “best practices” for using an integrated modeling platform in the classroom. Use of an integrated modeling platform as an instructional tool in nontraditional educational settings (workshops, study abroad programs, in outreach) is also discussed. Results of the study show statistically significant improvements in understanding after using the integrated modeling platform, suggesting such platforms can be effective tools for teaching fundamental cardiovascular computational modeling principles.

Computational Fluid Dynamics (CFD) Within Undergraduate Programs

2007 ◽  
Author(s):  
Kim A. Shollenberger
Keyword(s):  
United States ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Mechanical Engineering ◽  
Manufacturing Industry ◽  
Engineering Students ◽  
Geographic Location ◽  
Undergraduate Curriculum ◽  
The United States ◽  
Computational Fluid Dynamics Cfd

There has been a rapid increase over the past three decades in the use of computational fluid dynamics (CFD) analysis by industry as a tool to design and manufacture products. It is currently a vital part of the engineering process for many companies around the world, and utilized in nearly every manufacturing industry. Employers of engineering students who perform this type of analysis have expressed the need for students at the undergraduate or B.S. level to have some CFD experience. As a result, engineering programs in the United States have begun to respond to this need by developing new curriculum and by exposing students to the use of CFD for research. The level of incorporation and implementation of CFD into the undergraduate curriculum and research at institutions varies widely. The objective of this paper is to conduct a survey of the current use of CFD in the undergraduate curriculum within mechanical engineering departments in the United States. Twenty ABET accredited U.S. schools that offer a B.S. degree in mechanical engineering are investigated in this study that are a representative sample of engineering schools in the U.S. today in terms of admission standards, private versus public, predominate terminal degree, size, and geographic location. Topics investigated include if CFD classes are offered to undergraduates whether they are required or optional, when they are first introduced into the curriculum, number of credit hours dedicated to CFD, types of courses that include CFD, and whether commercial or in-house codes are utilized.

CFD Modeling and Modification of Cleanroom Design to Achieve ISO Class 6 Performance

2015 ◽  
Vol 58 (1) ◽  
pp. 1-6
Author(s):  
Richard H Morrison ◽  
Bradley K Hodges
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Microelectromechanical Systems ◽  
Cfd Modeling ◽  
Design Criteria ◽  
Multichip Modules ◽  
Wet Processing ◽  
Modeling Software ◽  
Computational Fluid Dynamics Cfd ◽  
Particle Counts

The Charles Stark Draper Laboratory Microfabrication Lab, located in Cambridge, Massachusetts, was commissioned in November 2012. The design and construction of this lab was discussed in a previous paper.[1] The laboratory comprises an area of 700.1 m2 (7545 ft2) under filter with 280 m2 (3014 ft2) of clean chase space, divided into 11 distinct cleanrooms. This paper focuses on the design and operation of one ISO Class 6 [2] cleanroom (3335) used for wet processing of microelectromechanical systems (MEMS) and multichip modules (MCM). The initial design criteria are discussed, along with installation of the tools and the non-compliance of ISO Class 6 particle counts. Based on these results, computational fluid dynamics (CFD) modeling software was employed to study the airflow in the room and modify the airflow to be compliant with ISO Class 6 standards.

Manufacturing and Computational Fluid Dynamics Modeling of a Patient-Specific Fistula Model

2017 ◽  
Author(s):  
Yang Liu ◽  
Yihao Zheng ◽  
John Pitre ◽  
William Weitzel ◽  
Joseph Bull ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Patient Specific ◽  
Cfd Model ◽  
Dynamics Modeling ◽  
Computational Fluid Dynamics Modeling ◽  
Computational Fluid Dynamics Cfd ◽  
Particle Imaging ◽  
Venous Wall ◽  
Good Agreement

Arteriovenous fistula is the joining of an artery to a vein to create vascular access for dialysis. The failure or maturation of fistula is affected by the vessel wall shear stress (WSS), which is difficult to measure in clinic. A computational fluid dynamics (CFD) model was built to estimate WSS of a patient-specific fistula model. To validate this model, a silicone phantom was manufactured and used to carry out a particle imaging velocimetry (PIV) experiment. The flow field from the PIV experiment shows a good agreement with the CFD model. From the CFD model, the highest WSS (40 Pa) happens near the anastomosis. WSS in the vein is larger than that in the artery. WSS on the outer venous wall is larger than that on the inner wall. The combined technique of additive manufacturing, silicone molding, and CFD is an effective tool to understand the maturation mechanism of a fistula.

Review of the Computational Fluid Dynamics Modeling of Fuel Cells

2005 ◽  
Vol 2 (4) ◽  
pp. 246-257 ◽  
Author(s):  
L. Ma ◽  
D. B. Ingham ◽  
M. Pourkashanian ◽  
E. Carcadea
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Fuel Cells ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Cfd Modeling ◽  
Dynamics Modeling ◽  
Computational Fluid Dynamics Modeling ◽  
Computational Fluid Dynamics Cfd ◽  
Exchange Membrane

This paper presents a review of the current situation in the computational fluid dynamics (CFD) modeling of fuel cells and highlights the significant challenges that lie ahead in the development of a comprehensive CFD model for fuel cell applications. The paper focuses on the issues concerned with solid oxide fuel cells and proton exchange membrane fuel cells because these are the two most poplar and probably the most promising types of fuel cells for both stationary and transport applications. However, the general principles presented in this paper are applicable to all types of fuel cells.

scholarly journals A STUDY OF COMPARTMENT FIRE UNDER FORCED VENTILATION: EXPERIMENTAL AND COMPUTATIONAL FLUID DYNAMICS MODELING

2010 ◽  
Vol 7 (2) ◽  
pp. 29-41
Author(s):  
M.Z. Abu Bakar ◽  
Y. Wu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flame Height ◽  
Compartment Fire ◽  
Forced Ventilation ◽  
Dynamics Modeling ◽  
Road Tunnel ◽  
Computational Fluid Dynamics Modeling ◽  
Computational Fluid Dynamics Cfd ◽  
Flame Shape

This paper discusses on the dynamic behavior of the flame and smoke inside a compartment fire. The compartment can be referred to a room, road tunnel, duct, compartment or a building. A series of small scales experiments were carried on four rectangular ducts that have the same height (250 mm) but different widths (125 mm, 250 mm, 500 mm and 1000 mm). Fire simulations on the same compartments were performed to investigate the effectiveness of Computational Fluid Dynamics (CFD) in predicting fire phenomenon. CFD was found capable to predict fire phenomenon such as flame shape, flame height and flame tilt angle similar to the experiment.

scholarly journals Computational Fluid Dynamics Modeling of Liver Radioembolization: A Review

2021 ◽  
Author(s):  
Jorge Aramburu ◽  
Raúl Antón ◽  
Macarena Rodríguez-Fraile ◽  
Bruno Sangro ◽  
José Ignacio Bilbao
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Point Of View ◽  
Cfd Modeling ◽  
Dynamics Modeling ◽  
Cfd Simulations ◽  
Computational Fluid Dynamics Modeling ◽  
Cfd Models ◽  
Computational Fluid Dynamics Cfd ◽  
Intraarterial Therapy

AbstractYttrium-90 radioembolization (RE) is a widely used transcatheter intraarterial therapy for patients with unresectable liver cancer. In the last decade, computer simulations of hepatic artery hemodynamics during RE have been performed with the aim of better understanding and improving the therapy. In this review, we introduce the concept of computational fluid dynamics (CFD) modeling with a clinical perspective and we review the CFD models used to study RE from the fluid mechanics point of view. Finally, we show what CFD simulations have taught us about the hemodynamics during RE, the current capabilities of CFD simulations of RE, and we suggest some future perspectives.

Improvement in Learning on Fluid Mechanics and Heat Transfer Courses Using Computational Fluid Dynamics

2010 ◽  
Vol 38 (2) ◽  
pp. 147-166 ◽  
Author(s):  
Blas Zamora ◽  
Antonio S. Kaiser ◽  
Pedro G. Vicente
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Fluid Mechanics ◽  
Engineering Education ◽  
Professional Training ◽  
Engineering Students ◽  
General Purpose ◽  
Project Based Learning ◽  
Computational Fluid Dynamics Cfd

This paper is concerned with the teaching of fluid mechanics and heat transfer on courses for the industrial engineer degree at the Polytechnic University of Cartagena (Spain). In order to improve the engineering education, a pedagogical method that involves project-based learning, using computational fluid dynamics (CFD), was applied. The project-based learning works well for mechanical engineering education, since it prepares students for their later professional training. The courses combined applied and advanced concepts of fluid mechanics with the basic numerical aspects of CFD, including validation of the results obtained. In this approach, the physical understanding of practical problems of fluid mechanics and heat transfer played an important role. Satisfactory numerical results were obtained by using both Phoenics and Fluent finite-volume codes. Some cases were solved using the well known Matlab software. Comparisons were made between the results obtained by analytical solutions (if any) with those reached by CFD general-purpose codes and with those obtained by Matlab. This system provides engineering students with a solid comprehension of several aspects of thermal and fluids engineering.

scholarly journals 3D computational fluid dynamics modeling of temperature and humidity in a humidified greenhouse

2021 ◽  
Vol 13 (1) ◽  
pp. 17-31
Author(s):  
Cuauhtémoc Pérez-Vega ◽  
◽  
José Armando Ramírez-Arias ◽  
Irineo L. López-Cruz ◽  
Ramón Arteaga-Ramírez ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Natural Ventilation ◽  
Temporal Distribution ◽  
Cfd Modeling ◽  
Cfd Model ◽  
Dynamics Modeling ◽  
Temperature And Humidity ◽  
Humidity Measurements ◽  
Computational Fluid Dynamics Cfd

Introduction: Medium and low technology greenhouses use natural ventilation as a method of temperature and humidity control. However, at certain times of the year, this is insufficient to extract excess heat inside the greenhouse, so devices such as hydrophanes (humidifiers) have been implemented to reduce the temperature. It is necessary to know the behavior of temperature and humidity, since both factors influence the development of crops and, therefore, their yield. Objective: To develop a computational fluid dynamics (CFD) model of a naturally ventilated zenithal greenhouse equipped with hydrophanes to understand the spatial and temporal distribution of temperature and humidity inside the greenhouse. Methodology: The experiment was carried out in a greenhouse equipped with hydrophanes and grown with bell pepper. Temperature and humidity measurements were performed from March 7 to 25, 2014. The ANSYS Workbench program was used for the 3D CFD modeling. Results: The CFD model satisfactorily described the temperature and humidity distribution of the greenhouse, with an error of 0.11 to 3.43 °C for temperature, and 0.44 to 10.80 % for humidity. Limitations of the study: Numerical modeling using CFD is inadequate to model the temporality of the variables. Originality: There are few studies that model humidity behavior with CFD and the use of hydrophanes in Mexico. Conclusions: The CFD model allowed visualizing the distribution of temperature and air humidity inside the greenhouse.

Computational Fluid Dynamics Modeling of Palm Fruit Pyrolysis in a Fast Fluidized Bed Reactor

2013 ◽  
Vol 699 ◽  
pp. 822-828
Author(s):  
P.L. Mtui
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Fluidized Bed ◽  
Volume Fraction ◽  
Pyrolysis Oil ◽  
Dynamics Modeling ◽  
Palm Fruit ◽  
Computational Fluid Dynamics Modeling ◽  
Computational Fluid Dynamics Cfd ◽  
Biomass Particles

The palm fruit biomass is introduced into the pyrolysis reactor bed and the transport equations for heat, mass and momentum transfer are solved using computational fluid dynamics (CFD) technique. The Eulerian-Eulerian approach is employed to model fluidizing behavior of the sand for an externally heated reactor prior to the introduction of the biomass. The particle motion in the reactor is computed using the drag laws which depend on the local volume fraction of each phase. Heat transfer from the fluidized bed to the biomass particles together with the pyrolysis reactions were simulated by Fluent CFD code through user-defined function (UDF). Spontaneous production of pyrolysis oil, char and non-condensable gases (NCG) confirm the observation widely reported in literature. The computer model can potentially be used to assess other candidate biomass sources also to assist design of optimized pyrolysis reactors.

Sign in / Sign up

Export Citation Format

Share Document