Jacobian Derivation of 5-DOF 3R2T Parallel Mechanisms

2004 ◽  
Author(s):  
Qinchuan Li ◽  
Xudong Hu ◽  
Zhen Huang
Keyword(s):  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Kinematic Chain ◽  
Parallel Mechanisms ◽  
Mobility Analysis

This paper presents a method for the Jacobian derivation of 5-DOF 3R2T PMs (parallel mechanisms), where 3R denotes three rotational DOFs (degrees of freedom) and 2T denotes two translational DOFs. First the mobility analysis of such kind of parallel mechanisms is reviewed briefly. The Jacobian matrix of the single limb kinematic chain is obtained via screw theory, which is a 6 × 5 matrix. Then it is shown that the mobility analysis of such kind of PM is important when simplifying the 6 × 5 matrix into a 5 × 5 Jacobian matrix. After obtaining the 5 × 5 Jacobian matrix for each limb, a 5 × 5 Jacobian matrix for the whole mechanism can be established.

Mobility Analysis of a Novel 3-5R Parallel Mechanism Family

2004 ◽  
Vol 126 (1) ◽  
pp. 79-82 ◽  
Author(s):  
Q. C. Li ◽  
Z. Huang
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Kinematic Chain ◽  
Parallel Mechanisms ◽  
Mobility Analysis

Mobility analysis of a novel 3-5R parallel mechanism family whose limb consists of a 2R and a 3R parallel subchain is performed by the aid of screw theory. A mobility criterion applicable to such 3-leg parallel mechanisms in which each kinematic chain contains five kinematic pairs is proposed. It is shown that under different structural conditions, the 3-5R parallel mechanism can have 3, 4, or 5 DOF (degrees of freedom). The structural conditions that guarantee the full-cycle mobility are analyzed. The analysis and the method presented in this paper will be helpful in using such a 3-5R parallel mechanism family and introduce new insights into the mobility analysis of parallel mechanisms.

scholarly journals Kinematic analysis of a novel 3-CRU translational parallel mechanism

2015 ◽  
Vol 6 (1) ◽  
pp. 57-64 ◽  
Author(s):  
B. Li ◽  
Y. M. Li ◽  
X. H. Zhao ◽  
W. M. Ge
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Structural Characteristics ◽  
Parallel Mechanisms ◽  
Reachable Workspace ◽  
Potential Applications ◽  
Moving Platform ◽  
And Performance

Abstract. In this paper, a modified 3-DOF (degrees of freedom) translational parallel mechanism (TPM) three-CRU (C, R, and U represent the cylindrical, revolute, and universal joints, respectively) structure is proposed. The architecture of the TPM is comprised of a moving platform attached to a base through three CRU jointed serial linkages. The prismatic motions of the cylindrical joints are considered to be actively actuated. Kinematics and performance of the TPM are studied systematically. Firstly, the structural characteristics of the mechanism are described, and then some comparisons are made with the existing 3-CRU parallel mechanisms. Although these two 3-CRU parallel mechanisms are both composed of the same CRU limbs, the types of freedoms are completely different due to the different arrangements of limbs. The DOFs of this TPM are analyzed by means of screw theory. Secondly, both the inverse and forward displacements are derived in closed form, and then these two problems are calculated directly in explicit form. Thereafter, the Jacobian matrix of the mechanism is derived, the performances of the mechanism are evaluated based on the conditioning index, and the performance of a 3-CRU TPM changing with the actuator layout angle is investigated. Thirdly, the workspace of the mechanism is obtained based on the forward position analysis, and the reachable workspace volume is derived when the actuator layout angle is changed. Finally, some conclusions are given and the potential applications of the mechanism are pointed out.

Mobility Analysis of Parallel Mechanisms Based on Screw Theory and the Concept of Equivalent Serial Kinematic Chain

2005 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin
Keyword(s):  
Systematic Approach ◽  
Screw Theory ◽  
Kinematic Chain ◽  
Second Step ◽  
Parallel Mechanisms ◽  
Mobility Analysis ◽  
Single Loop ◽  
Kinematic Chains ◽  
Serial Chain ◽  
Parallel Kinematic

This paper presents a systematic approach for the mobility analysis of parallel mechanisms. The method is based on screw theory and the concept of equivalent serial chain. An equivalent serial kinematic chain of a k-legged PKC (parallel kinematic chain) is defined as a serial kinematic chain which has the same twist system and the wrench system as the k-legged PKC. Using the proposed approach, the mobility analysis of a PKC is performed in two steps. The first step is the instantaneous mobility analysis, and the second step is the full-cycle mobility inspection. The first step is dealt with based on screw theory. The second step is performed with the aid of the concept of equivalent serial chain and the types of multi-DOF overconstrained single-loop kinematic chains. The proposed approach is illustrated with several examples.

scholarly journals Virtual and Physical Prototyping of Reconfigurable Parallel Mechanisms with Single Actuation

2021 ◽  
Vol 11 (15) ◽  
pp. 7158
Author(s):  
Alexey Fomin ◽  
Daniil Petelin ◽  
Anton Antonov ◽  
Victor Glazunov ◽  
Marco Ceccarelli
Keyword(s):  
Computer Aided Design ◽  
Screw Theory ◽  
Complex Geometry ◽  
Kinematic Chain ◽  
Parallel Mechanisms ◽  
Mobility Analysis ◽  
Kinematic Chains ◽  
Physical Prototype ◽  
Detailed Computer ◽  
Aided Design

The paper presents novel models of reconfigurable parallel mechanisms (RPMs) with a single active degree-of-freedom (1-DOF). The mechanisms contain three to six identical kinematic chains, which provide three (for the tripod) to zero (for the hexapod) uncontrollable DOFs. Screw theory is applied to carry out mobility analysis and proves the existence of controllable and uncontrollable DOFs of these mechanisms. Each kinematic chain in the synthesized mechanisms consists of planar and spatial parts. Such a design provides them with reconfiguration capabilities even when the driving link is fixed. This allows reproduction of diverse output trajectories without using additional actuators. In this paper, the model of a mechanism with six kinematic chains (hexapod) has been virtually and physically prototyped. The designing and assembling algorithms are developed using the detailed computer-aided design (CAD) model, which was further used to carry out kinetostatic analysis considering complex geometry of mechanism elements and friction among all contacting surfaces of joints. The developed virtual prototype and its calculation data have been further applied to fabricate mechanism elements and assemble an actuated full-scale physical prototype for future testing.

Design of a Four Legged Parallel Mechanism to Improve the Dexterity of Walking Robot

2009 ◽  
Author(s):  
ChiHyo Kim ◽  
KunWoo Park ◽  
TaeSung Kim ◽  
MinKi Lee
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Topology Design ◽  
Condition Numbers ◽  
Walking Robots ◽  
Rough Terrain ◽  
Parallel Mechanisms ◽  
Walking Robot ◽  
Intermediate Mechanism

This paper designs a four legged parallel mechanism to improve the dexterity of three layered parallel walking robot. Topology design is conducted for a leg mechanism composed of four legs, base and ground, which constitute a redundant parallel mechanism. This mechanism is subdivided into four sub-mechanism composed of three legs. A motor vector is adopted to determine the 6×8 Jacobian of the redundant parallel mechanism and the 6×6 Jacobian of the sub-mechanisms, respectively. The condition number of the Jacobian matrix is used as an index to measure a dexterity. We analyze the condition numbers of the Jacobian over the positional and orientational walking space. The analytical results show that a sub-mechanism has lots of singularities within workspace but they are removed by a redundant parallel mechanism improving the dexterity. This paper presents a parallel typed walking robot to enlarge walking space and stability region. Seven types of three layered walking robots are designed by inserting an intermediate mechanism between the upper and the lower legged parallel mechanisms. They provide various types of gaits to walk rough terrain and climb over a wall with small degrees of freedom.

A New Index of Static Actuation Force Sensitivity of Mechanisms Based on Unified Forward Jacobian Matrix

2020 ◽  
Vol 12 (6) ◽  
Author(s):  
Xu Wang ◽  
Weizhong Guo ◽  
Youcheng Han
Keyword(s):  
Jacobian Matrix ◽  
Screw Theory ◽  
Structural Constraints ◽  
Parallel Mechanisms ◽  
Analysis Method ◽  
Actuation Force ◽  
Force Sensitivity ◽  
Differential Operation ◽  
Static Equation ◽  
Pose Optimization

Abstract This paper proposes a novel performance index, which is called static actuation force sensitivity (SAFS), to investigate the response of the actuation forces when the amplitude of the suffered load of the end-effector has a change. Smaller SAFS can protect the actuations, and the load is mainly suffered by the structural constraints. This work starts with the construction of the unified forward Jacobian matrix of both serial and parallel mechanisms by screw theory. Then, with the forward Jacobian matrix, the inverse static equation is established. SAFS is thus introduced by the “partial differential” operation on the inverse static equation. SAFS is only related to the position of the whole mechanism and the direction of the suffered load, but not related to the detailed value of the amplitude of the load and the detailed value of the actuation forces; thus, SAFS can reveal the essence of static force capacities of the mechanisms. The example mechanism (namely, the 3revolute-prismatic-spherical (RPS) parallel mechanism) is used to illustrate the distribution of SAFS both over the workspace and at a certain pose. The analysis method of SAFS and the proposed index are expected to be applied to the pose optimization in the motion planning of the mechanisms to protect the actuations.

scholarly journals Mobility analysis of parallel mechanisms based on screw theory and mechanism topology

2015 ◽  
Vol 7 (11) ◽  
pp. 168781401561046 ◽  
Author(s):  
Liping Wang ◽  
Huayang Xu ◽  
Liwen Guan
Keyword(s):  
Screw Theory ◽  
Parallel Mechanisms ◽  
Mobility Analysis

A class of reconfigurable parallel mechanisms with five-bar metamorphic linkage

2016 ◽  
Vol 231 (11) ◽  
pp. 2089-2099 ◽  
Author(s):  
Chunxu Tian ◽  
Yuefa Fang ◽  
Sheng Guo ◽  
Haibo Qu
Keyword(s):  
Potential Application ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Constraint Force ◽  
Motion Modes ◽  
Moving Platform ◽  
Five Phases ◽  
Serial Chains

This paper presents a planar five-bar metamorphic linkage which has five phases resulting from locking of motors. Reconfigurable limbs are constructed by integrating the five-bar metamorphic linage as sub-chains. The branch transition of metamorphic linkage is analyzed. By adding appropriate joints to the planer five-bar metamorphic linkage, reconfigurable limbs whose constraint can switch among no constraint, a constrained force and a constrained couple are obtained. Serial limb structures that can provide a constraint force and a constraint couple are synthesized based on screw theory. Reconfigurable limbs that have five configurations associated with the five phases of the five-bar metamorphic linkage are assembled with 4-DOF (degrees-of-freedom) serial chains. A class of reconfigurable parallel mechanisms is derived by connecting the moving platform to the base with three identical kinematic limbs. These parallel mechanisms can perform various output motion modes such as 3T, 3R, 2T1R, 1T2R, 3T1R, 2T2R, 1T3R, 2T3R, 3T2R and 3T3R. Finally, the potential application of the proposed mechanisms is analyzed and conclusions are drawn.

Reconfigurable Mechanisms From the Intersection of Surfaces

2016 ◽  
Vol 8 (2) ◽  
Author(s):  
P. C. López-Custodio ◽  
J. M. Rico ◽  
J. J. Cervantes-Sánchez ◽  
G. I. Pérez-Soto
Keyword(s):  
Degrees Of Freedom ◽  
Kinematic Chain ◽  
Mobility Analysis ◽  
Revolute Joint ◽  
Revolute Joints ◽  
Reconfigurable Mechanisms ◽  
Three Degrees Of Freedom

The method of intersection of surfaces generated by kinematic dyads is applied to obtain mechanisms that are able to shift from one mode of motion to another. Then a mobility analysis shows that the singularities of the generated surfaces can be used to obtain mechanisms which can change their number of degrees-of-freedom depending on its configuration. The generator dyads are connected as usually done by a spherical pair. However, in the cases shown in this contribution the three-degrees-of-freedom of the spherical pair are not all necessary to keep the kinematic chain closed and movable, and the spherical pair can be substituted by either a pair of intersecting revolute joints or a single revolute joint. This substitution can be obtained by means of two methods presented in this contribution.

Enumeration and instantaneous mobility analysis of a class of 3-UPU parallel manipulators with equilateral triangular platforms

Robotica ◽  
2021 ◽  
pp. 1-32
Author(s):  
Sercan Boztaş ◽  
Gökhan Kiper
Keyword(s):  
Software Package ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Mobility Analysis ◽  
Specific Design ◽  
Design Task ◽  
Moving Platforms ◽  
Joint Axis ◽  
Motion Characteristics

Abstract In this study, several joint axis orientations on equilateral platforms and the limbs of 3-UPU parallel manipulators (PMs) are examined. The generated joint layouts for the platforms were matched with each other to generate and enumerate manipulator architectures based on certain assumptions. The structures of thus obtained manipulators are examined and limb types were determined. These limb types were analyzed using screw theory. The instantaneous mobility of the manipulators and the motion characteristics of the moving platforms are tabulated. The finite mobility analysis of one of the manipulators is performed using a software package as an example. Among several different 3-UPU PM architectures, 118 novel 3-UPU PMs with non-parasitic 3-degrees-of-freedom are significantly important. The classified 3-UPU PMs with determined motion characteristics can be used by researchers as a design alternative for their specific design task.

Sign in / Sign up

Export Citation Format

Share Document