A New Index of Static Actuation Force Sensitivity of Mechanisms Based on Unified Forward Jacobian Matrix

2020 ◽  
Vol 12 (6) ◽  
Author(s):  
Xu Wang ◽  
Weizhong Guo ◽  
Youcheng Han
Keyword(s):  
Jacobian Matrix ◽  
Screw Theory ◽  
Structural Constraints ◽  
Parallel Mechanisms ◽  
Analysis Method ◽  
Actuation Force ◽  
Force Sensitivity ◽  
Differential Operation ◽  
Static Equation ◽  
Pose Optimization

Abstract This paper proposes a novel performance index, which is called static actuation force sensitivity (SAFS), to investigate the response of the actuation forces when the amplitude of the suffered load of the end-effector has a change. Smaller SAFS can protect the actuations, and the load is mainly suffered by the structural constraints. This work starts with the construction of the unified forward Jacobian matrix of both serial and parallel mechanisms by screw theory. Then, with the forward Jacobian matrix, the inverse static equation is established. SAFS is thus introduced by the “partial differential” operation on the inverse static equation. SAFS is only related to the position of the whole mechanism and the direction of the suffered load, but not related to the detailed value of the amplitude of the load and the detailed value of the actuation forces; thus, SAFS can reveal the essence of static force capacities of the mechanisms. The example mechanism (namely, the 3revolute-prismatic-spherical (RPS) parallel mechanism) is used to illustrate the distribution of SAFS both over the workspace and at a certain pose. The analysis method of SAFS and the proposed index are expected to be applied to the pose optimization in the motion planning of the mechanisms to protect the actuations.

Forward/Reverse Velocity and Acceleration Analysis for a Class of Lower-Mobility Parallel Mechanisms

2006 ◽  
Vol 129 (4) ◽  
pp. 390-396 ◽  
Author(s):  
Si J. Zhu ◽  
Zhen Huang ◽  
Hua F. Ding
Keyword(s):  
Kinematic Analysis ◽  
Jacobian Matrix ◽  
Hessian Matrix ◽  
Degree Of Freedom ◽  
Parallel Mechanisms ◽  
Analysis Method ◽  
Rear Part ◽  
Lower Mobility ◽  
Acceleration Analysis

This paper proposes a novel kinematic analysis method for a class of lower-mobility mechanisms whose degree-of-freedom (DoF) equal the number of single-DoF kinematic pairs in each kinematic limb if all multi-DoF kinematic pairs are substituted by the single one. For such an N-DoF (N<6) mechanism, this method can build a square (N×N) Jacobian matrix and cubic (N×N×N) Hessian matrix. The formulas in this method for different parallel mechanisms have unified forms and consequently the method is convenient for programming. The more complicated the mechanism is (for instance, the mechanism has more kinematic limbs or pairs), the more effective the method is. In the rear part of the paper, mechanisms 5-DoF 3-R(CRR) and 5-DoF 3-(RRR)(RR) are analyzed as examples.

Jacobian Derivation of 5-DOF 3R2T Parallel Mechanisms

2004 ◽  
Author(s):  
Qinchuan Li ◽  
Xudong Hu ◽  
Zhen Huang
Keyword(s):  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Kinematic Chain ◽  
Parallel Mechanisms ◽  
Mobility Analysis

This paper presents a method for the Jacobian derivation of 5-DOF 3R2T PMs (parallel mechanisms), where 3R denotes three rotational DOFs (degrees of freedom) and 2T denotes two translational DOFs. First the mobility analysis of such kind of parallel mechanisms is reviewed briefly. The Jacobian matrix of the single limb kinematic chain is obtained via screw theory, which is a 6 × 5 matrix. Then it is shown that the mobility analysis of such kind of PM is important when simplifying the 6 × 5 matrix into a 5 × 5 Jacobian matrix. After obtaining the 5 × 5 Jacobian matrix for each limb, a 5 × 5 Jacobian matrix for the whole mechanism can be established.

scholarly journals Generalized Kinematics Analysis of Hybrid Mechanisms Based on Screw Theory and Lie Groups Lie Algebras

2020 ◽  
Author(s):  
Peng Sun ◽  
Yanbiao Li ◽  
Ke Chen ◽  
Wen-Tao Zhu ◽  
Qi Zhong ◽  
...  
Keyword(s):  
Lie Groups ◽  
Lie Algebras ◽  
Screw Theory ◽  
Hessian Matrix ◽  
Parallel Mechanisms ◽  
Analysis Method ◽  
Kinematics Analysis ◽  
Hybrid Mechanisms ◽  
Parallel Configuration

Abstract The advanced mathematical tools are used to conduct research on the kinematics analysis of hybrid mechanisms, and the generalized analysis method and concise kinematics transfer matrix are obtained. First, according to the kinematics analysis of serial mechanisms, the basic principles of Lie groups Lie algebras in dealing with the spatial switching and differential operations of screw vectors are briefly explained. Then, based on the standard ideas of Lie operations, the method for kinematics analysis of parallel mechanisms is derived, and Jacobian matrix and Hessian matrix are formulated both recursively and in closed form. After that, according to the mapping relationship between the parallel joints and the corresponding equivalent series joints, a forward kinematics analysis method and two inverse kinematics analysis methods of hybrid mechanisms are studied. A case study is performed to verify the calculated matrices, in which a humanoid hybrid robotic arm with the parallel-series-parallel configuration is taken as an example. Simulation experiment results show that the obtained formulas are exact and the proposed method for kinematics analysis of hybrid mechanisms is practicable.

scholarly journals Kinematic analysis of a novel 3-CRU translational parallel mechanism

2015 ◽  
Vol 6 (1) ◽  
pp. 57-64 ◽  
Author(s):  
B. Li ◽  
Y. M. Li ◽  
X. H. Zhao ◽  
W. M. Ge
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Structural Characteristics ◽  
Parallel Mechanisms ◽  
Reachable Workspace ◽  
Potential Applications ◽  
Moving Platform ◽  
And Performance

Abstract. In this paper, a modified 3-DOF (degrees of freedom) translational parallel mechanism (TPM) three-CRU (C, R, and U represent the cylindrical, revolute, and universal joints, respectively) structure is proposed. The architecture of the TPM is comprised of a moving platform attached to a base through three CRU jointed serial linkages. The prismatic motions of the cylindrical joints are considered to be actively actuated. Kinematics and performance of the TPM are studied systematically. Firstly, the structural characteristics of the mechanism are described, and then some comparisons are made with the existing 3-CRU parallel mechanisms. Although these two 3-CRU parallel mechanisms are both composed of the same CRU limbs, the types of freedoms are completely different due to the different arrangements of limbs. The DOFs of this TPM are analyzed by means of screw theory. Secondly, both the inverse and forward displacements are derived in closed form, and then these two problems are calculated directly in explicit form. Thereafter, the Jacobian matrix of the mechanism is derived, the performances of the mechanism are evaluated based on the conditioning index, and the performance of a 3-CRU TPM changing with the actuator layout angle is investigated. Thirdly, the workspace of the mechanism is obtained based on the forward position analysis, and the reachable workspace volume is derived when the actuator layout angle is changed. Finally, some conclusions are given and the potential applications of the mechanism are pointed out.

Type Synthesis of Parallel Mechanisms With a Constant Jacobian Matrix

2018 ◽  
Vol 10 (6) ◽  
Author(s):  
Yanzhi Zhao ◽  
Yachao Cao ◽  
Xianwen Kong ◽  
Tieshi Zhao
Keyword(s):  
Jacobian Matrix ◽  
Screw Theory ◽  
Velocity Analysis ◽  
Parallel Mechanisms ◽  
Input Output ◽  
Type Synthesis ◽  
Analysis And Evaluation ◽  
Analysis Design ◽  
Moving Platform ◽  
And Control

Jacobian matrix plays a key role in the analysis, design, and control of robots. For example, it can be used for the performance analysis and evaluation of parallel mechanisms (PMs). However, the Jacobian matrix of a PM generally varies with the poses of the moving platform in the workspace. This leads to a nonconstant performance index of the PM. PMs with a constant Jacobian matrix have simple kinematics and are easy to design and control. This paper proposes a method for obtaining PMs with a constant Jacobian matrix. First, the criteria for detecting invariance of a Jacobian matrix are obtained based on the screw theory. An approach to the synthesis of PMs with a constant Jacobian matrix is then proposed. Using this approach, PMs with a constant Jacobian matrix are synthesized in two steps: the limb design and the combination of the limbs. Several PMs with a constant Jacobian matrix are obtained. In addition to the translational parallel mechanisms (TPMs) with a constant Jacobian matrix in the literature, the mixed-motion PMs whose moving platform can both translate and rotate with a constant Jacobian matrix are newly identified. The input/output velocity analysis of several PMs is presented to verify that Jacobian matrix of these PMs is constant.

scholarly journals Singularity analysis of the H4 robot using Grassmann–Cayley algebra

Robotica ◽  
2012 ◽  
Vol 30 (7) ◽  
pp. 1109-1118 ◽  
Author(s):  
Semaan Amine ◽  
Stéphane Caro ◽  
Philippe Wenger ◽  
Daniel Kanaan
Keyword(s):  
Jacobian Matrix ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Analysis Method ◽  
Rank Deficiency ◽  
Constraint Analysis ◽  
Cayley Algebra ◽  
Lower Mobility ◽  
Grassmann Cayley Algebra

SUMMARYThis paper extends a recently proposed singularity analysis method to lower-mobility parallel manipulators having an articulated nacelle. Using screw theory, a twist graph is introduced in order to simplify the constraint analysis of such manipulators. Then, a wrench graph is obtained in order to represent some points at infinity on the Plücker lines of the Jacobian matrix. Using Grassmann–Cayley algebra, the rank deficiency of the Jacobian matrix amounts to the vanishing condition of the superbracket. Accordingly, the parallel singularities are expressed in three different forms involving superbrackets, meet and join operators, and vector cross and dot products, respectively. The approach is explained through the singularity analysis of the H4 robot. All the parallel singularity conditions of this robot are enumerated and the motions associated with these singularities are characterized.

From Origami to a New Class of Centralized 3-DOF Parallel Mechanisms

2007 ◽  
Author(s):  
Ernesto Rodriguez Leal ◽  
Jian S. Dai
Keyword(s):  
Closed Form ◽  
Inverse Kinematics ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Geometric Constraints ◽  
Parallel Mechanisms ◽  
Closed Form Solutions ◽  
New Class ◽  
Workspace Analysis ◽  
Inverse Kinematics Problem

This paper applies the ‘technomimetics’ concept to generate a new class of parallel mechanisms inspired by origami folds. This new class of 3-DOF (Degree of Freedom) parallel mechanisms is constructed with 3-RPRP architecture. When the geometric constraints mentioned in this paper are applied, the mechanisms will be allowed to rotate around the x and y axes and translate vertically along the z axis, while the centre of the platform remains concentric to the centre of its base. This paper investigates both position and geometry of these mechanisms and identifies the closed form solutions for the inverse kinematics problem. The differential kinematical analysis is developed by deriving the Jacobian matrix through screw theory and the singularities are identified with workspace analysis. The paper ends with isotropic configuration analysis and illustrates the characteristics of the new mechanisms.

scholarly journals Generalized Kinematics Analysis of Hybrid Mechanisms Based on Screw Theory and Lie Groups Lie Algebras

2021 ◽  
Vol 34 (1) ◽  
Author(s):  
Peng Sun ◽  
Yanbiao Li ◽  
Ke Chen ◽  
Wentao Zhu ◽  
Qi Zhong ◽  
...  
Keyword(s):  
Lie Groups ◽  
Lie Algebras ◽  
Screw Theory ◽  
Hessian Matrix ◽  
Parallel Mechanisms ◽  
Analysis Method ◽  
Kinematics Analysis ◽  
Hybrid Mechanisms ◽  
Parallel Configuration

AbstractAdvanced mathematical tools are used to conduct research on the kinematics analysis of hybrid mechanisms, and the generalized analysis method and concise kinematics transfer matrix are obtained. In this study, first, according to the kinematics analysis of serial mechanisms, the basic principles of Lie groups and Lie algebras are briefly explained in dealing with the spatial switching and differential operations of screw vectors. Then, based on the standard ideas of Lie operations, the method for kinematics analysis of parallel mechanisms is derived, and Jacobian matrix and Hessian matrix are formulated recursively and in a closed form. Then, according to the mapping relationship between the parallel joints and corresponding equivalent series joints, a forward kinematics analysis method and two inverse kinematics analysis methods of hybrid mechanisms are examined. A case study is performed to verify the calculated matrices wherein a humanoid hybrid robotic arm with a parallel-series-parallel configuration is considered as an example. The results of a simulation experiment indicate that the obtained formulas are exact and the proposed method for kinematics analysis of hybrid mechanisms is practically feasible.

scholarly journals A New Method for Type Synthesis of 2R1T and 2T1R 3-DOF Redundant Actuated Parallel Mechanisms with Closed Loop Units

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Yongquan Li ◽  
Yang Zhang ◽  
Lijie Zhang
Keyword(s):  
Closed Loop ◽  
Screw Theory ◽  
Line Graph ◽  
Degree Of Freedom ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Allocation Criteria ◽  
Grassmann Line Geometry ◽  
Moving Platform ◽  
Atlas Method

Abstract The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms, or using screw theory to perform multiple getting intersection and union to complete type synthesis. The number of redundant parallel mechanisms obtained by these two methods is limited. In this paper, based on Grassmann line geometry and Atlas method, a novel and effective method for type synthesis of redundant actuated parallel mechanisms (PMs) with closed-loop units is proposed. Firstly, the degree of freedom (DOF) and constraint line graph of the moving platform are determined successively, and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph, and a branch constraint allocation scheme is formulated based on the allocation criteria. Secondly, a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units. Finally, the branch chains that meet the requirements of branch chains configuration criteria and F&C (degree of freedom & constraint) line graph are assembled. In this paper, two types of 2 rotational and 1 translational (2R1T) redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational (2T1R) redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples, and 238, 92 and 15 new configurations were synthesized. All the mechanisms contain closed-loop units, and the mechanisms and the actuators both have good symmetry. Therefore, all the mechanisms have excellent comprehensive performance, in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled. The instantaneous analysis shows that all mechanisms are not instantaneous, which proves the feasibility and practicability of the method.

Design of a Four Legged Parallel Mechanism to Improve the Dexterity of Walking Robot

2009 ◽  
Author(s):  
ChiHyo Kim ◽  
KunWoo Park ◽  
TaeSung Kim ◽  
MinKi Lee
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Topology Design ◽  
Condition Numbers ◽  
Walking Robots ◽  
Rough Terrain ◽  
Parallel Mechanisms ◽  
Walking Robot ◽  
Intermediate Mechanism

This paper designs a four legged parallel mechanism to improve the dexterity of three layered parallel walking robot. Topology design is conducted for a leg mechanism composed of four legs, base and ground, which constitute a redundant parallel mechanism. This mechanism is subdivided into four sub-mechanism composed of three legs. A motor vector is adopted to determine the 6×8 Jacobian of the redundant parallel mechanism and the 6×6 Jacobian of the sub-mechanisms, respectively. The condition number of the Jacobian matrix is used as an index to measure a dexterity. We analyze the condition numbers of the Jacobian over the positional and orientational walking space. The analytical results show that a sub-mechanism has lots of singularities within workspace but they are removed by a redundant parallel mechanism improving the dexterity. This paper presents a parallel typed walking robot to enlarge walking space and stability region. Seven types of three layered walking robots are designed by inserting an intermediate mechanism between the upper and the lower legged parallel mechanisms. They provide various types of gaits to walk rough terrain and climb over a wall with small degrees of freedom.

Sign in / Sign up

Export Citation Format

Share Document