Comparison of Finite Element Solutions of Non-Rational B-Spline and ANCF Elements in the Analysis of Flexible Multibody Systems

2011 ◽  
Author(s):  
Hiroki Yamashita ◽  
Hiroyuki Sugiyama
Keyword(s):  
Finite Element ◽  
Multibody Systems ◽  
Absolute Nodal Coordinate Formulation ◽  
Beam Element ◽  
Flexible Multibody Systems ◽  
Numerical Convergence ◽  
Absolute Nodal Coordinate ◽  
B Spline ◽  
Numerical Examples ◽  
The Third

In this investigation, comparison of finite element solutions obtained using the B-spline approach and the absolute nodal coordinate formulation (ANCF) is performed. Furthermore, equivalence of the two formulations with different orders of polynomials and degrees of continuity is demonstrated by several numerical examples. The degree of continuity can be easily controlled in B-spline elements by changing knot multiplicities, while continuity conditions associated with higher order derivatives need to be imposed to achieve C2 and higher continuities in ANCF elements. In order to compare element performances of the third and quartic B-spline and ANCF elements, the three-node quartic ANCF beam element is developed. It is demonstrated in several numerical examples that use of B-spline and ANCF elements with same orders and continuities leads to identical results. Furthermore, effects of polynomial orders and continuities on the accuracy and numerical convergence are demonstrated.

Performance of the Incremental and Non-Incremental Finite Element Formulations in Flexible Multibody Problems

1999 ◽  
Vol 122 (4) ◽  
pp. 498-507 ◽  
Author(s):  
Marcello Campanelli ◽  
Marcello Berzeri ◽  
Ahmed A. Shabana
Keyword(s):  
Finite Element ◽  
Multibody Systems ◽  
Absolute Nodal Coordinate Formulation ◽  
Flexible Multibody Systems ◽  
Large Displacement ◽  
Body Motion ◽  
Absolute Nodal Coordinate ◽  
Flexible Multibody ◽  
The Absolute ◽  
Finite Element Formulations

Many flexible multibody applications are characterized by high inertia forces and motion discontinuities. Because of these characteristics, problems can be encountered when large displacement finite element formulations are used in the simulation of flexible multibody systems. In this investigation, the performance of two different large displacement finite element formulations in the analysis of flexible multibody systems is investigated. These are the incremental corotational procedure proposed in an earlier article (Rankin, C. C., and Brogan, F. A., 1986, ASME J. Pressure Vessel Technol., 108, pp. 165–174) and the non-incremental absolute nodal coordinate formulation recently proposed (Shabana, A. A., 1998, Dynamics of Multibody Systems, 2nd ed., Cambridge University Press, Cambridge). It is demonstrated in this investigation that the limitation resulting from the use of the infinitesmal nodal rotations in the incremental corotational procedure can lead to simulation problems even when simple flexible multibody applications are considered. The absolute nodal coordinate formulation, on the other hand, does not employ infinitesimal or finite rotation coordinates and leads to a constant mass matrix. Despite the fact that the absolute nodal coordinate formulation leads to a non-linear expression for the elastic forces, the results presented in this study, surprisingly, demonstrate that such a formulation is efficient in static problems as compared to the incremental corotational procedure. The excellent performance of the absolute nodal coordinate formulation in static and dynamic problems can be attributed to the fact that such a formulation does not employ rotations and leads to exact representation of the rigid body motion of the finite element. [S1050-0472(00)00604-8]

Incremental Finite Element Formulations and Flexible Multibody Dynamics

1999 ◽  
Author(s):  
Marcello Berzeri ◽  
Marcello Campanelli ◽  
A. A. Shabana
Keyword(s):  
Finite Element ◽  
Multibody Dynamics ◽  
Multibody Systems ◽  
Absolute Nodal Coordinate Formulation ◽  
Flexible Multibody Dynamics ◽  
Flexible Multibody Systems ◽  
Large Displacement ◽  
Absolute Nodal Coordinate ◽  
Flexible Multibody ◽  
Finite Element Formulations

Abstract In this investigation, the performance of two different large displacement finite element formulations in the analysis of flexible multibody systems is investigated. These are the incremental corotational procedure proposed by Rankin and Brogan [8] and the non-incremental absolute nodal coordinate formulation recently proposed [9]. It is demonstrated in this investigation that the limitation resulting from the use of the nodal rotations in the incremental corotational procedure can lead to simulation problems even when very simple flexible multibody applications are considered.

Studies on the Stiffness Properties of the Absolute Nodal Coordinate Formulation for Three-Dimensional Beams

2003 ◽  
Author(s):  
Jussi T. Sopanen ◽  
Aki M. Mikkola
Keyword(s):  
Cross Section ◽  
Absolute Nodal Coordinate Formulation ◽  
Three Dimensional ◽  
Beam Element ◽  
Element Formulation ◽  
Absolute Nodal Coordinate ◽  
Numerical Examples ◽  
Elastic Forces ◽  
Nodal Coordinates ◽  
The Absolute

The objective of this study is to investigate the accuracy of elastic force models that can be used in the absolute nodal coordinate finite element formulation for the analysis of threedimensional beams. The elastic forces of the absolute nodal coordinate formulation can be derived using a continuum mechanics approach. This study investigates the accuracy and usability of such an approach for the three-dimensional absolute nodal coordinate beam element. This study also presents an improvement proposal for the use of a continuum mechanics approach in deriving the expression of the elastic forces of the beam element. The improvement proposal is verified using several numerical examples. Numerical examples show that the proposed elastic force model of the beam element agrees with analytical results as well as with solutions obtained using existing finite element formulation. The results also imply that the beam element does not suffer from the phenomenon called shear locking. In the beam element under investigation, global displacements and slopes are used as the nodal coordinates, which resulted in a large number of nodal degrees of freedom. This study provides a physical interpretation of the nodal coordinates used in the absolute nodal coordinate beam element. It is shown that the beam element based on the absolute nodal coordinate formulation relaxes the assumption of the rigid cross-section and is capable of representing a distortional deformation of the cross-section.

scholarly journals A Numerical Solution to Fractional Diffusion Equation for Force-Free Case

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
O. Tasbozan ◽  
A. Esen ◽  
N. M. Yagmurlu ◽  
Y. Ucar
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Diffusion Equation ◽  
Exact Analytical Solution ◽  
Fractional Diffusion ◽  
Fractional Diffusion Equation ◽  
Spline Functions ◽  
B Spline ◽  
Numerical Examples ◽  
Free Case

A collocation finite element method for solving fractional diffusion equation for force-free case is considered. In this paper, we develop an approximation method based on collocation finite elements by cubic B-spline functions to solve fractional diffusion equation for force-free case formulated with Riemann-Liouville operator. Some numerical examples of interest are provided to show the accuracy of the method. A comparison between exact analytical solution and a numerical one has been made.

scholarly journals B-splines Algorithms for Solving Fredholm Linear Integro-Differential Equations

2004 ◽  
Vol 1 (2) ◽  
pp. 340-346
Author(s):  
Baghdad Science Journal
Keyword(s):  
Differential Equations ◽  
Spline Function ◽  
Cubic Spline ◽  
Second Order ◽  
Third Order ◽  
B Spline ◽  
Numerical Examples ◽  
B Splines ◽  
The Third ◽  
New Procedures

Algorithms using the second order of B -splines [B (x)] and the third order of B -splines [B,3(x)] are derived to solve 1' , 2nd and 3rd linear Fredholm integro-differential equations (F1DEs). These new procedures have all the useful properties of B -spline function and can be used comparatively greater computational ease and efficiency.The results of these algorithms are compared with the cubic spline function.Two numerical examples are given for conciliated the results of this method.

Sign in / Sign up

Export Citation Format

Share Document