Design and Analysis of Metal Foam Enhanced Latent Thermal Energy Storage With Embedded Heat Pipes for Concentrating Solar Power Plants

2013 ◽  
Author(s):  
K. Nithyanandam ◽  
R. Pitchumani
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Solar Power ◽  
Metal Foam ◽  
Heat Pipes ◽  
High Energy ◽  
Metal Foams ◽  
Concentrating Solar Power

Thermal energy Storage is a critical component of Concentrating Solar Power (CSP) plant, enabling uninterrupted operation of plant during periods of cloudy or intermittent solar weather. Investigations of Latent Thermal Energy Storage (LTES) which utilizes Phase Change Material (PCM) as a heat storage medium is considered due to its high energy storage density and low capital cost. However, the low thermal conductivity of the PCM restricts the solidification rate of the PCM leading to inefficient heat transfer between the PCM and the HTF which carries thermal energy to the power block. To address this, LTES embedded with heat pipes and PCM’s stored within the framework of porous metal foams possessing one to two orders of magnitude higher thermal conductivity than the PCM are considered in the present study. A transient, computational analysis of the metal foam (MF) enhanced LTES system with embedded heat pipes is performed to investigate the enhancement in the thermal performance of the system for different arrangement of heat pipes and design parameter of metal foams, during both charging and discharging operation.

Numerical Analysis of Latent Thermal Energy Storage System With Embedded Thermosyphons

2012 ◽  
Author(s):  
Karthik Nithyanandam ◽  
Ranga Pitchumani
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Solar Power ◽  
Storage System ◽  
High Energy ◽  
Concentrating Solar Power ◽  
Discharge Performance ◽  
Low Thermal Conductivity

Latent thermal energy storage (LTES) system offers high energy storage density and nearly isothermal operation for concentrating solar power generation. However, the low thermal conductivity possessed by the phase change material (PCM) used in LTES system limits the heat transfer rates. Utilizing thermosyphons to charge or discharge a LTES system offers a promising engineering solution to compensate for the low thermal conductivity of the PCM. The present work numerically investigates the enhancement in the thermal performance of charging and discharging process of LTES system by embedding thermosyphons. A transient, computational analysis of the LTES system with embedded thermosyphons is performed for both charging and discharging cycles. The influence of the design configuration of the system and the arrangement of the thermosyphons on the charge and discharge performance of the LTES installed in a concentrating solar power plant (CSP) is analyzed to identify configurations that lead to improved effectiveness.

Computational Studies on Metal Foam and Heat Pipe Enhanced Latent Thermal Energy Storage

2014 ◽  
Vol 136 (5) ◽  
Author(s):  
K. Nithyanandam ◽  
R. Pitchumani
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Metal Foam ◽  
Heat Pipes ◽  
High Energy ◽  
Heat Transfer Fluid ◽  
Design Parameters

Thermal energy storage is a distinguishing component of a concentrating solar power (CSP) system, which enables uninterrupted operation of plant during periods of cloudy or intermittent solar availability. Latent thermal energy storage (LTES) which utilizes phase change material (PCM) as a heat storage medium is attractive due to its high energy storage density and low capital cost. However, the low thermal conductivity of the PCM restricts its solidification rate, leading to inefficient heat transfer between the PCM and the heat transfer fluid which carries thermal energy to the power block. To address this limitation, LTES embedded with heat pipes and PCM's stored within the framework of porous metal foam that have one to two orders of magnitude higher thermal conductivity than the PCM are considered in the present study. A transient, computational analysis of the metal foam enhanced LTES system with embedded heat pipes is performed to investigate the enhancement in the thermal performance of the system for different arrangements of heat pipes and design parameters of metal foam, during both charging and discharging operation.

Computational Modeling of Latent Thermal Energy Storage System With Embedded Heat Pipes

2010 ◽  
Author(s):  
Karthik Nithyanandam ◽  
Ranga Pitchumani
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage System ◽  
Heat Pipes ◽  
Energy Storage System ◽  
High Energy ◽  
Thermal Energy Storage System

Due to the intermittent nature of solar energy availability, storing sun’s energy in the form of latent thermal energy of a phase change material (PCM) is an effective technique that is widely used in energy storage and load management applications. In a Latent Thermal Energy Storage System (LTES), a heat transfer fluid (HTF) exchanges energy with a PCM. The advantages of an LTES include its isothermal operation and high energy storage density. However, the low thermal conductivity of PCM poses a significant disadvantage due to reduction in the rate at which the PCM can be melted (charging) or solidified (discharging). This paper explores an approach to reducing the thermal resistance of PCM in a LTES through embedded heat pipes. A heat pipe is a passive heat transfer device that efficiently transfers large amount of energy between the PCM and HTF thus indirectly amplifying the effective thermal conductivity of PCM. A transient computational analysis of a shell and tube LTES embedded with heat pipes is performed for charging to determine the position of melt front and energy stored as a function of time. The influence of the number and orientation of heat pipes and design configuration of the system is analyzed to identify configurations that lead to improved effectiveness.

Solid/Liquid Phase Change Heat Transfer in Latent Heat Thermal Energy Storage

2009 ◽  
Author(s):  
D. Zhou ◽  
C. Y. Zhao
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Energy Storage ◽  
Phase Change ◽  
Calcium Chloride ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Metal Foams ◽  
Chloride Hexahydrate

Phase change materials (PCMs) have been widely used for thermal energy storage systems due to their capability of storing and releasing large amounts of energy with a small volume and a moderate temperature variation. Most PCMs suffer the common problem of low thermal conductivity, being around 0.2 and 0.5 for paraffin and inorganic salts, respectively, which prolongs the charging and discharging period. In an attempt to improve the thermal conductivity of phase change materials, the graphite or metallic matrix is often embedded within PCMs to enhance the heat transfer. This paper presents an experimental study on heat transfer characteristics of PCMs embedded with open-celled metal foams. In this study both paraffin wax and calcium chloride hexahydrate are employed as the heat storage media. The transient heat transfer behavior is measured. Compared to the results of pure PCMs samples, the investigation shows that the additions of metal foams can double the overall heat transfer rate during the melting process. The results of calcium chloride hexahydrate are also compared with those of paraffin wax.

scholarly journals Comparative Analysis of Single- and Dual-Media Thermocline Tanks for Thermal Energy Storage in Concentrating Solar Power Plants

2015 ◽  
Vol 137 (3) ◽  
Author(s):  
Carolina Mira-Hernández ◽  
Scott M. Flueckiger ◽  
Suresh V. Garimella
Keyword(s):  
Energy Storage ◽  
Molten Salt ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Solar Power ◽  
Filler Material ◽  
Tank Wall ◽  
Concentrating Solar Power ◽  
Wall Boundary Conditions ◽  
Thermal Ratcheting

A molten-salt thermocline tank is a low-cost option for thermal energy storage (TES) in concentrating solar power (CSP) plants. Typical dual-media thermocline (DMT) tanks contain molten salt and a filler material that provides sensible heat capacity at reduced cost. However, conventional quartzite rock filler introduces the potential for thermomechanical failure by successive thermal ratcheting of the tank wall under cyclical operation. To avoid this potential mode of failure, the tank may be operated as a single-medium thermocline (SMT) tank containing solely molten salt. However, in the absence of filler material to dampen tank-scale convection eddies, internal mixing can reduce the quality of the stored thermal energy. To assess the relative merits of these two approaches, the operation of DMT and SMT tanks is simulated under different periodic charge/discharge cycles and tank wall boundary conditions to compare the performance with and without a filler material. For all conditions assessed, both thermocline tank designs have excellent thermal storage performance, although marginally higher first- and second-law efficiencies are predicted for the SMT tank. While heat loss through the tank wall to the ambient induces internal flow nonuniformities in the SMT design over the scale of the entire tank, strong stratification maintains separation of the hot and cold regions by a narrow thermocline; thermocline growth is limited by the low thermal diffusivity of the molten salt. Heat transport and flow phenomena inside the DMT tank, on the other hand, are governed to a great extent by thermal diffusion, which causes elongation of the thermocline. Both tanks are highly resistant to performance loss over periods of static operation, and the deleterious effects of dwell time are limited in both tank designs.

Sign in / Sign up

Export Citation Format

Share Document