Comparative Evaluation of Dielectric Materials for Plasma Actuators Active Flow Control and Heat Transfer Applications

2021 ◽  
Author(s):  
F. F. Rodrigues ◽  
J. Nunes-Pereira ◽  
M. Abdollahzadeh ◽  
J. Pascoa ◽  
S. Lanceros-Mendez
Keyword(s):  
Heat Transfer ◽  
Flow Control ◽  
Dielectric Layer ◽  
Active Flow Control ◽  
Thermal Power ◽  
Dielectric Materials ◽  
Plasma Actuators ◽  
Dbd Plasma ◽  
Control Applications ◽  
Active Flow

Abstract Dielectric Barrier Discharge (DBD) plasma actuators are simple devices with great potential for active flow control applications. Further, it has been recently proven their ability for applications in the area of heat transfer, such as film cooling of turbine blades or ice removal. The dielectric material used in the fabrication of these devices is essential in determining the device performance. However, the variety of dielectric materials studied in the literature is very limited and the majority of the authors only use Kapton, Teflon, Macor ceramic or poly(methyl methacrylate) (PMMA). Furthermore, several authors reported difficulties in the durability of the dielectric layer when the actuators operate at high voltage and frequency. Also, it has been reported that, after long operation time, the dielectric layer suffers degradation due to its exposure to plasma discharge, degradation that may lead to the failure of the device. Considering the need of durable and robust actuators, as well as the need of higher flow control efficiencies, it is highly important to develop new dielectric materials which may be used for plasma actuator fabrication. In this context, the present study reports on the experimental testing of dielectric materials which can be used for DBD plasma actuators fabrication. Plasma actuators fabricated of poly(vinylidene fluoride) (PVDF) and polystyrene (PS) have been fabricated and evaluated. Although these dielectric materials are not commonly used as dielectric layer of plasma actuators, their interesting electrical and dielectric properties and the possibility of being used as sensors, indicate their suitability as potential alternatives to the standard used materials. The plasma actuators produced with these nonstandard dielectric materials were analyzed in terms of electrical characteristics, generated flow velocity and mechanical efficiency, and the obtained results were compared with a standard actuator made of Kapton. An innovative calorimetric method was implemented in order to estimate the thermal power transferred by these devices to an adjacent flow. These results allowed to discuss the ability of these new dielectric materials not only for flow control applications but also for heat transfer applications.

scholarly journals Experimental Study of Dielectric Barrier Discharge Plasma Actuators for Active Flow Control

2020 ◽  
Author(s):  
Miguel André Barbosa Moreira ◽  
Frederico Miguel Freire Rodrigues ◽  
José Carlos Páscoa Marques
Keyword(s):  
Flow Control ◽  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Active Flow Control ◽  
Dielectric Materials ◽  
Plasma Actuators ◽  
Dbd Plasma ◽  
Dielectric Barrier ◽  
Suitable Material ◽  
Active Flow

The objective of this study is to compare the effect of varying the material used as dielectric layer on the properties of the plasma actuators themselves. The experiments have shown that actuators with a PIB dielectric have a lower power consumption, can achieve higher velocities and have a better mechanical efficiency, but are more prone to failure due to breakdown of the dielectric. We verified that PIB rubber is a suitable material for DBD plasma actuators fabrication presenting several interesting features. Keywords: Active flow control, Plasma actuators, Dielectric barrier discharge, Dielectric materials

Test Conditions for Performance Characterization of Dielectric Barrier Discharge (DBD) Plasma Actuators for Active Flow Control in Jet Engines

2011 ◽  
Author(s):  
David E. Ashpis ◽  
Douglas R. Thurman
Keyword(s):  
Flow Control ◽  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Active Flow Control ◽  
Plasma Actuators ◽  
Dbd Plasma ◽  
Dielectric Barrier ◽  
Jet Engine ◽  
Active Flow

Dielectric Barrier Discharge (DBD) plasma actuators for active flow control in the jet engine need to be tested in the laboratory to characterize their performance at flight operating conditions. DBD plasma actuators generate a wall-jet electronically by creating weakly ionized plasma, therefore their performance is affected by gas discharge properties, which in turn depend on the pressure and temperature at the actuator placement location. Characterization of actuators is initially performed in a laboratory chamber without external flow. It is usually impractical to simultaneously set engine pressures and temperatures in a chamber, and a simplified approach is desired. It is assumed that the plasma discharge depends only on the gas density. Other temperature effects are assumed to be negligible. Therefore, tests can be performed at room temperature with chamber pressure set to yield the same density as in engine operating flight conditions. Engine data was obtained from four generic engine models; 300-, 150-, and 50-Passenger (PAX) aircraft engines, and a military jet-fighter engine. The static and total pressure, temperature, and density distributions along the engine were calculated for sea-level takeoff and altitude cruise, and the chamber pressures needed to test the actuators were calculated. The results show that testing has to be performed over a wide range of pressures from 12.4 to 0.03 atm, depending on the application. For example, if a DBD plasma actuator is to be placed at the compressor exit of a 300 PAX engine, it has to be tested at 12.4 atm for takeoff, and 6 atm for cruise conditions. If it is to be placed at the low-pressure turbine, it has to be tested at 0.5 and 0.2 atm, respectively. These results have implications for the feasibility and design of DBD plasma actuators for jet engine flow control applications. In addition, the distributions of unit Reynolds number, Mach number, and velocity along the engine are provided. The engine models are non-proprietary and this information can be used for evaluation of other types of actuators and for other purposes.

Scaling Studies of Cyclotronic Plasma Actuators for Active Flow Control Applications

2019 ◽  
Author(s):  
Joseph W. Zimmerman ◽  
Georgi Hristov ◽  
Moiz Vahora ◽  
Martin Motz ◽  
David R. Richardson ◽  
...  
Keyword(s):  
Flow Control ◽  
Active Flow Control ◽  
Plasma Actuators ◽  
Control Applications ◽  
Active Flow

Simple frigate shape plasma flow control

2016 ◽  
Vol 230 (14) ◽  
pp. 2693-2699 ◽  
Author(s):  
R Bardera-Mora ◽  
A Conesa ◽  
I Lozano
Keyword(s):  
Flow Control ◽  
Active Flow Control ◽  
Plasma Actuators ◽  
Control Technique ◽  
Shape Model ◽  
Image Velocimetry ◽  
Barrier Discharge Plasma ◽  
Plasma Flow Control ◽  
Active Flow ◽  
Low Speed Wind Tunnel

This experimental investigation presents a new active flow control technique based on plasma actuators applied to a backward facing step whose structure is similar to that formed by the hangar and flight deck of small naval vessels. These experiments were carried out by testing a simple frigate shape model settled at 0° wind over deck in a low-speed wind tunnel. Two different configurations of dielectric barrier discharge plasma actuator have been used to modify the flow downstream of the step. Results obtained investigating the flow by particle image velocimetry prove the capacity of plasma actuators by reducing instabilities and turbulence over the simple frigate shape model.

Heat and Mass Transfer Enhancement by Active Flow Control in Micro Domains

2011 ◽  
Author(s):  
Junkyu Jung ◽  
Daren Elcock ◽  
Chih-Jung Kuo ◽  
Michael Amitay ◽  
Yoav Peles
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Kinetic Energy ◽  
Flow Field ◽  
Flow Control ◽  
Turbulent Kinetic Energy ◽  
Heat And Mass Transfer ◽  
Active Flow Control ◽  
Micro Particle Image Velocimetry ◽  
Active Flow

A flow control method is presented that employ liquid and gas jets to enhance heat and mass transfer in micro domains. By introducing pressure disturbances, mixing can be significantly enhanced through the promotion of early transition to a turbulent flow. Since heat transfer mechanisms are closely linked to flow characteristics, the heat transfer coefficient can be significantly enhanced with rigorous mixing. The flow field of water around a low aspect ratio micro circular pillar of diameter 150 μm entrenched inside a 225 μm high by 1500 μm wide microchannel with active flow control was studied and its effect on mixing is discussed. A steady control jet emanating from a 25 μm slit on the pillar was introduced to induce favorable disturbances to the flow in order to modify the flow field, promote turbulence, and increase large-scale mixing. Micro particle image velocimetry (μPIV) was employed to quantify the flow field, the spanwise vorticity, and the turbulent kinetic energy (TKE) in the microchannel. Flow regimes (i.e., steady, transition from quasi-steady to unsteady, and unsteady flow) were elucidated. The turbulent kinetic energy was shown to significantly increase with the controlled jet, and therefore, significantly enhance mixing at the micro scale.

Experimental Analysis of Alternative Dielectric Materials for DBD Plasma Actuators

2018 ◽  
Author(s):  
F. F. Rodrigues ◽  
J. C. Pascoa ◽  
M. Trancossi
Keyword(s):  
Dielectric Material ◽  
Experimental Testing ◽  
Low Cost ◽  
Active Flow Control ◽  
Dielectric Strength ◽  
Dielectric Materials ◽  
Plasma Actuators ◽  
Poly Lactic Acid ◽  
Dbd Plasma ◽  
Advantages And Disadvantages

Dielectric Barrier Discharge plasma actuators are simple devices with great potential for active flow control applications. They have very interesting features which have made them a topic of interest for many researchers, for instance they present very low mass, fast response time, low cost, easy implementation and they are fully electronic with no moving parts. The dielectric material used in the construction of these devices present an important role in their performance. The variety of dielectrics studied in the literature is very restrict and the majority of the authors make use of Kapton, Teflon, Macor ceramic or PMMA. Furthermore, several authors reported difficulties in the durability of the dielectric layer when actuators operate at high levels of voltage and frequency. Considering this background, the present study focus on the experimental testing of alternative dielectric materials which can be used for DBD plasma actuators fabrication. Considering this, plasma actuators with dielectric layers made of Poly-Isobutylene rubber, Poly-Lactic acid and Acetoxy Silicon were experimentally tested. Although these dielectric materials are not commonly used in plasma actuators, their values of dielectric strength and dielectric permittivity indicate they can be good solutions. The plasma actuators facbricated with these alternative dielectric materials were experimentally analysed in terms of electrical characteristics and induced flow velocity, and the obtained results were compared with an actuator made of Kapton which is, currently, the most common dielectric material for plasma actuators. The effectiveness of the actuators was estimated and the advantages and disadvantages of the use of each dielectric material were discussed.

Sign in / Sign up

Export Citation Format

Share Document