Performance and Emission Characteristics of a Small Scale Gas Turbine Engine Fueled With Propanol/Jet A Blends

Author(s):  
Carlos J. Mendez ◽  
Ramkumar N. Parthasarathy ◽  
Subramanyam R. Gollahalli

Alcohols serve as an alternate energy resource to the conventional petroleum-based fuels. The objective of this study was to document the performance and emission characteristics of blends of n-propanol and Jet A fuel in a small-scale gas turbine engine. The experiments were conducted in a 30kW gas turbine engine with a single-stage centrifugal flow compressor, annular combustion chamber and a single-stage axial flow turbine. In addition to neat propanol and Jet A fuel, three blends, with 25%, 50% and 75% of propanol by volume, were used as the fuels. The thrust, thrust-specific fuel consumption, and the concentrations of CO and NOx in the exhaust were measured and compared with those measured with Jet A fuel. The engine was operated at the same throttle settings with all the fuels. The operational range of engine rotational speed was shifted downwards with the addition of propanol due to its lower heating value. The thrust specific fuel consumption increased with the addition of propanol, while the CO emission index increased and NOx emission index decreased.

2010 ◽  
Vol 87 (5) ◽  
pp. 1701-1709 ◽  
Author(s):  
Zehra Habib ◽  
Ramkumar Parthasarathy ◽  
Subramanyam Gollahalli

In this study, a process of inlet air cooling was implemented in the intake of a land-based gas turbine engine for electricity generation. The motivation behind the study is to improve the performance of the gas turbine engine in hot climate conditions,which causes a significant decrease in the output power and an increase in specific fuel consumption. For inlet air cooling, a refrigeration cycle was attached to the turbo-shaft gas turbine engine,and power required by the refrigeration is extracted from the mechanical engine power output of the gas turbine. A 43 MWclass gas turbine engine which is similar totheGeneral Electric LM6000 engine was modeled in this study. Considering an average coefficient of performance of 3.0 for a refrigeration system, the inlet cooling provided (by supplying cooled inlet air at 15oC) a 22.21% net power increase anda5.2% power specific fuel consumption improvement at 55oCambient conditions.


Energy ◽  
2020 ◽  
Vol 194 ◽  
pp. 116822
Author(s):  
Yasuhito Nakatake ◽  
Hirofumi Yamashita ◽  
Hiroshi Tanaka ◽  
Hidechika Goto ◽  
Takashi Suzuki

Author(s):  
N. R. Balling ◽  
V. W. van Ornum

The objective of the research and development program reported by this paper was to decrease the specific fuel consumption of a small gas-turbine engine by means of an increase in pressure ratio alone. Development of a centrifugal compressor is presented, with a general description of equipment, methods, and special problems met during the tests. Results showed the required decrease in specific fuel consumption and pointed up the advantages of a straightforward development program.


Author(s):  
Iman K. Reksowardojo ◽  
Long H. Duong ◽  
Tatang H. Soerawidjaja ◽  
Tri T.G. Nguyen ◽  
Osamu Fujita ◽  
...  

2021 ◽  
pp. 5-16
Author(s):  
Yu.М. Temis ◽  
A.V. Solovjeva ◽  
Yu.N. Zhurenkov ◽  
A.N. Startsev ◽  
M.Yu. Temis ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document