DSMC Simulations of Squeeze Film Under a Harmonically Oscillating Micro RF Switch With Large Tip Displacements

2012 ◽  
Author(s):  
Nadim A. Diab ◽  
Issam A. Lakkis
Keyword(s):  
Gas Flow ◽  
Rarefied Gas ◽  
Numerical Technique ◽  
Direct Simulation Monte Carlo ◽  
Squeeze Film ◽  
Rf Switch ◽  
Fluid Forces ◽  
Field Velocity ◽  
Micro Cantilever ◽  
Beam Reflection

The two-dimensional unsteady behavior of a rarefied gas film under an oscillating micro-cantilever RF switch is presented. The microbeam, undergoing a parabolic deflection profile, is allowed to oscillate harmonically between its equilibrium position and the fixed substrate underneath for large beam-tip displacements. The gas film dynamics in terms of the flow field velocity and fluid forces exerted on the oscillating microbeam are discussed. The numerical technique used to model the rarefied gas flow is the Direct Simulation Monte Carlo (DSMC) method where the Knudsen (Kn) number is greater than 0.01 (ie. non-continuum regime). Unlike previous work in literature, the beam undergoes large deflections, which requires implementation, in DSMC, of a more realistic molecule-beam reflection behavior based on the instantaneous beam’s position and velocity. The effects of inertia, both local acceleration (St) and convection term (Re), and compressibility (Ma) on the gas film dynamics are examined over ranges of oscillating frequencies, velocity amplitudes, and microbeam’s lengths.

DSMC Simulations of Squeeze Film Between a Micro Beam Undergoing Large Amplitude Oscillations and a Substrate

2012 ◽  
Author(s):  
Nadim A. Diab ◽  
Issam A. Lakkis
Keyword(s):  
Rarefied Gas ◽  
Numerical Study ◽  
Direct Simulation Monte Carlo ◽  
Squeeze Film ◽  
Rf Switch ◽  
Dsmc Method ◽  
Flow Parameters ◽  
Fluid Behavior ◽  
Simulation Monte Carlo ◽  
The Impact

This paper investigates the behavior of a gas film in a micro RF switch. A Two-dimensional numerical study of the flow field is performed as the micro-beam oscillates harmonically between its equilibrium position and the fixed substrate underneath. Unlike previous work in literature, the beam undergoes large displacements throughout the film gap thickness and the behavior of the gas film along with its impact on the moving RF switch (force exerted by gas on the beam’s front and back faces) are discussed. Since the gas film thickness is of the order of few microns (i.e. 0.01<Kn<1), the rarefied gas exists in the non-continuum regime and, as such, the Direct Simulation Monte Carlo (DSMC) method is used to simulate the fluid behavior. The impact of the squeeze film on the beam is investigated over a range of frequencies, velocity amplitudes, and for different film gases, corresponding to ranges of dimensionless flow parameters such as the Reynolds (Re), Strouhal (St) and Mach (Ma) numbers on the gas film behavior.

Investigation of the Squeeze Film Dynamics Underneath a Microstructure With Large Oscillation Amplitudes and Inertia Effects

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
Nadim A. Diab ◽  
Issam A. Lakkis
Keyword(s):  
Rarefied Gas ◽  
Direct Simulation Monte Carlo ◽  
Squeeze Film ◽  
Dsmc Method ◽  
Inertia Effects ◽  
Flow Parameters ◽  
Fluid Behavior ◽  
Dimensionless Groups ◽  
Simulation Monte Carlo ◽  
The Impact

This paper presents direct simulation Monte Carlo (DSMC) numerical investigation of the dynamic behavior of a gas film in a microbeam. The microbeam undergoes large amplitude harmonic motion between its equilibrium position and the fixed substrate underneath. Unlike previous work in literature, the beam undergoes large displacements throughout the film gap thickness and the behavior of the gas film along with its impact on the moving microstructure (force exerted by gas on the beam's front and back faces) is discussed. Since the gas film thickness is of the order of few microns (i.e., 0.01 < Kn < 1), the rarefied gas exists in the noncontinuum regime and, as such, the DSMC method is used to simulate the fluid behavior. The impact of the squeeze film on the beam is investigated over a range of frequencies and velocity amplitudes, corresponding to ranges of dimensionless flow parameters such as the Reynolds, Strouhal, and Mach numbers on the gas film behavior. Moreover, the behavior of compressibility pressure waves as a function of these dimensionless groups is discussed for different simulation case studies.

DSMC Simulation of Rarefied Gas Flow Over a Wall Mounted Cube

2019 ◽  
Author(s):  
Deepak Nabapure ◽  
Ram Chandra Murthy
Keyword(s):  
Gas Flow ◽  
Rarefied Gas ◽  
Flow Behavior ◽  
Direct Simulation Monte Carlo ◽  
Temperature Fields ◽  
Gas Flows ◽  
Rarefied Gas Flows ◽  
Dsmc Simulation ◽  
Recirculation Length ◽  
Velocity Pressure

Abstract The present study investigates the flow behavior of the rarefied gas over a wall-mounted cube. The problem is studied for different cube heights (h) of 9mm and 18mm in the slip and transition regimes. The Direct Simulation Monte Carlo (DSMC) method is employed to evaluate the properties such as velocity, pressure and temperature fields. The Reynolds number (Re) ranges from 403 to 807, and the Knudsen number (Kn) is in the range from 0.05 to 0.103. A typical shock wave is formed in front of the cube. The recirculation length of the vortices normalized with respect to the respective cube heights for Kn = 0.05 and Kn = 0.103 are about 1.11 and 1.95 respectively. Similarly, the center of the vortices is located at about 3.33 and 6.11 times the respective cube heights upstream, for Kn = 0.05 and Kn = 0.103. The local temperature and pressure variations observed upstream of the cube are two orders higher in magnitude and are primarily attributed to strong compressibility effects. The present study paves the way for benchmarking, and forms a basis for understanding the rarefied gas flows over complex geometries.

A Hybrid Fokker-Planck-DSMC Solution Algorithm for the Whole Range of Knudsen Numbers

2013 ◽  
Author(s):  
M. Hossein Gorji ◽  
Stephan Küchlin ◽  
Patrick Jenny
Keyword(s):  
Gas Flow ◽  
Rarefied Gas ◽  
Time Integration ◽  
Computational Cost ◽  
Direct Simulation Monte Carlo ◽  
Large Cell ◽  
Solution Algorithm ◽  
Rarefied Gas Flows ◽  
Knudsen Numbers ◽  
Fokker Planck

In this work, we present a hybrid algorithm based on the Fokker-Planck (FP) kinetic model and direct simulation Monte Carlo (DSMC) for studies of rarefied gas flows. A particle based FP solution algorithm for rarefied gas flow simulations has recently been devised by the authors. The motivation behind the FP approximation is purely computational, i.e. due to the fact that the resulting random processes are continuous in time the computational cost of the corresponding time integration becomes independent of the Knudsen number. However, the method faces limitations for flows with very high Knudsen numbers (larger than approximately 5). In the method presented here, the FP approach is coupled with DSMC in order to gain from the efficiency of the FP model and from the accuracy of DSMC at small and large cell based Knudsen numbers, respectively.

scholarly journals Development of an Efficient Particle Approach for Micro-Scale Gas Flow Simulations

2009 ◽  
Author(s):  
Quanhua Sun ◽  
Feng Li ◽  
Jing Fan ◽  
Chunpei Cai
Keyword(s):  
Cell Size ◽  
Gas Flow ◽  
Rarefied Gas ◽  
Direct Simulation Monte Carlo ◽  
Gas Flows ◽  
Dsmc Method ◽  
Low Speed ◽  
Micro Scale ◽  
Information Preservation ◽  
Cfd Method

The micro-scale gas flows are usually low-speed flows and exhibit rarefied gas effects. It is challenging to simulate these flows because traditional CFD method is unable to capture the rarefied gas effects and the direct simulation Monte Carlo (DSMC) method is very inefficient for low-speed flows. In this study we combine two techniques to improve the efficiency of the DSMC method. The information preservation technique is used to reduce the statistical noise and the cell-size relaxed technique is employed to increase the effective cell size. The new cell-size relaxed IP method is found capable of simulating micro-scale gas flows as shown by the 2D lid-driven cavity flows.

Direct Simulation Monte Carlo Method for the Simulation of Rarefied Gas Flow in Discrete Track Recording Head/Disk Interfaces

2008 ◽  
Vol 131 (1) ◽  
Author(s):  
Maik Duwensee ◽  
Frank E. Talke ◽  
Shoji Suzuki ◽  
Judy Lin ◽  
David Wachenschwanz
Keyword(s):  
Monte Carlo ◽  
Monte Carlo Method ◽  
Gas Flow ◽  
Rarefied Gas ◽  
Direct Simulation Monte Carlo ◽  
Direct Simulation ◽  
Rarefied Gas Flow ◽  
Recording Head ◽  
Discrete Track ◽  
Simulation Monte Carlo

The direct simulation Monte Carlo method is used to study rarefied gas flow between an inclined plane slider bearing and a nanochannel representing one groove in discrete track recording head/disk interfaces. The forces acting on the slider are determined as a function of slider pitch angle, disk velocity, groove pitch, width, and groove depth. It is found that the influence of manufacturing tolerances on slider forces is smaller for deep and wide grooves than for the case of shallow and narrow grooves.

scholarly journals Simulation of Rarefied Gas Flow in a Rectangular Enclosure

2019 ◽  
Author(s):  
Sumit Chamling Rai ◽  
Jayesh Sanwal ◽  
K Ram Chandra Murthy
Keyword(s):  
Gas Flow ◽  
Rarefied Gas ◽  
Direct Simulation Monte Carlo ◽  
Stochastic Modelling ◽  
Dsmc Method ◽  
Driven Cavity ◽  
Simulation Monte Carlo ◽  
Computationally Intensive ◽  
Velocity Pressure ◽  
Good Agreement

The present work investigates the effects of rarefaction on gas flow patterns in a lid-driven cavity using the simulation package dsmcFoam, on the OpenFOAM platform. Direct Simulation Monte Carlo (DSMC) method is a simulation technique which caters to the regime in between the computationally intensive molecular dynamics solvers, as well as the often inaccurate NS based solvers (applied to the rarefied gas simulations). It was proposed by G.A. Bird which employs the stochastic modelling of particle motion.Simulations are performed and results are verified for the flow of a rarefied gas Argon) for different lid velocities within the domain. The results are presented as streamlines, contours of velocity, pressure and temperature, along with velocities in X and Y directions. They have been found to be in good agreement with the previous experimental and numerical observations. Our simulations show that these eddies are much harder to observe in the rarefied domain, and cannot be observed upto velocities as high as 200m/s in a cavity with aspect ratio 1.

Rarefied gas flow behavior in micro/nanochannels under specified wall heat flux

2015 ◽  
Vol 26 (08) ◽  
pp. 1550087 ◽  
Author(s):  
Mojtaba Balaj ◽  
Hassan Akhlaghi ◽  
Ehsan Roohi
Keyword(s):  
Heat Transfer ◽  
Boundary Condition ◽  
Heat Flux ◽  
Gas Flow ◽  
Rarefied Gas ◽  
Flow Behavior ◽  
Direct Simulation Monte Carlo ◽  
Wall Heat Flux ◽  
Linear Distribution ◽  
Thermal Transpiration

In this paper, we investigate the effects of convective heat transfer on the argon gas flow through micro/nanochannels subject to uniform wall heat flux (UWH) boundary condition using the direct simulation Monte Carlo (DSMC) method. Both the hot wall (q wall > 0) and the cold wall (q wall < 0) cases are considered. We consider the effect of wall heat flux on the centerline pressure, velocity profile and mass flow rate through the channel in the slip regime. The effects of rarefaction, property variations and compressibility are considered. We show that UWH boundary condition leads to the thermal transpiration. Our investigations showed that this thermal transpiration enhances the heat transfer rate at the walls in the case of hot walls and decreases it where the walls are being cooled. We also show that the deviation of the centerline pressure distribution from the linear distribution depends on the direction of the wall heat flux.

Sign in / Sign up

Export Citation Format

Share Document