Two-Dimensional Model for Wave-Induced Pore Pressure Accumulation in Marine Sediments

Author(s):  
Hongyi Zhao ◽  
Dong-Sheng Jeng ◽  
Huijie Zhang ◽  
Jisheng Zhang

In this paper, a two-dimensional (2D) porous model is established to investigate the predication of the wave-induced pore pressure accumulations in marine sediments. In the new model, the VARANS equation is used as the governing equation for the wave motion, while the Biot’s consolidation theory is used for porous seabed. The present model is verified with the previous experimental data [1] and provides a better prediction of pore pressure accumulation than the previous solution [2]. With the new model, a 2D liquefied zone is formed at the beginning of the process, and then gradually move down. After a certain wave cycle (for example, 30 wave cycles in the numerical example), the liquefaction zone will become one-dimensional (1D) and continuously move down and eventually approaches to a constant. Numerical results also conclude the maximum liquefaction depth increases as wave height increases and in shallow water.

Author(s):  
Behnam Shabani ◽  
Dong-Sheng Jeng ◽  
Jianhong Ye ◽  
Yakun Guo

In this paper, a three-dimensional numerical model is developed to analyze the ocean wave-induced seabed response. The pipeline is assumed to be rigid and anchored within a trench. Quasi-static soil consolidation equations are solved with the aid of the proposed Finite Element (FE) model within COMSOL Multiphysics. The influence of wave obliquity on seabed responses, the pore pressure and soil stresses, are studied. A comprehensive tests of FE meshes is performed to determine appropriate meshes for numerical calculations. The present model is verified with the previous analytical solutions without a pipeline and two-dimensional experimental data with a pipeline. Numerical results suggest that the effect of wave obliquity on soil responses can be explained through the following two mechanisms: (i) geometry-based three-dimensional influences, and (ii) the formation of inversion nodes. However, the influences of wave obliquity on the wave-induced pore pressure are insignificant.


Author(s):  
H.-Y. Zhao ◽  
D.-S. Jeng ◽  
Z. Guo ◽  
J.-S. Zhang

In this paper, we presented an integrated numerical model for the wave-induced residual liquefaction around a buried offshore pipeline. In the present model, unlike previous investigations, two new features were added in the present model: (i) new definition of the source term for the residual pore pressure generations was proposed and extended from 1D to 2D; (ii) preconsolidation due to self-weight of the pipeline was considered. The present model was validated by comparing with the previous experimental data for the cases without a pipeline and with a buried pipeline. Based on the numerical model, first, we examined the effects of seabed, wave and pipeline characteristics on the pore pressure accumulations and residual liquefaction. The numerical results indicated a pipe with a deeper buried depth within the seabed with larger consolidation coefficient and relative density can reduce the risk of liquefaction around a pipeline. Second, we investigated the effects of a trench layer on the wave-induced seabed response. It is found that the geometry of the trench layer (thickness and width), as well as the backfill materials (permeability K and relative density Dr) have significant effect on the development of liquefaction zone around the buried pipeline. Furthermore, under certain conditions, partially backfill the trench layer up to one pipeline diameter is sufficient to protect the pipelines from the wave-induced liquefaction.


2015 ◽  
Vol 9 (1) ◽  
pp. 408-416 ◽  
Author(s):  
Z. S. Wong ◽  
C. C. Liao ◽  
D. S. Jeng

In this paper, a three-dimensional poro-elastoplastic model for the short-crested wave-induced pore pressures in a porous seabed is presented. Unlike the previous models, both elasticity and plasticity of seafloor are considered in the present model. This study considers the effects of wave and soil characteristics on the pore pressures and was validated with the previous wave experiment data. As the numerical analysis shows, higher value of plastic parameter leads to a faster residual pore pressure accumulation, which is closely related to the occurrence of seabed liquefaction. In particular, at the dissipation stage, residual pore pressure sharply decreases when enlarging plastic parameter , which dominates the velocity of accumulation of plastic volumetric strain.


Author(s):  
C. C. Liao ◽  
H. Zhao ◽  
D.-S. Jeng

In this paper, we presented an integrated numerical model for the wave-induced pore pressures in marine sediments. Two mechanisms of the wave-induced pore pressures were considered. Both elastic components (for oscillatory) and the plastic components (for residual) were integrated to predict the wave-induced excess pore pressures and liquefaction in marine sediments. The proposed two-dimensional (2D) poro-elasto-plastic model can simulate the phenomenon of the pore pressure buildup and dissipation process in a sandy seabed. The proposed model overall agreed well with the previous wave experiments and geo-centrifuge tests. Based on the parametric study, first, we examined the effects of soil and wave characteristics on the pore pressure accumulations and residual liquefaction. Then, a set of analysis on liquefaction potential was presented to show the development of liquefaction zone. Numerical example shows that the pattern of progressive waves-induced liquefaction gradually changes from 2D to one-dimensional (1D), while the standing wave-induced liquefaction stays in a 2D pattern in the whole process.


2000 ◽  
Vol 413 ◽  
pp. 317-343 ◽  
Author(s):  
H. KYOTOH ◽  
S. FUJII ◽  
D. V. TO

For the understanding of longshore currents along a natural beach, the effects of bottom unevenness are considered to be important, especially for the flow in the swash zone. Currents in the swash zone are strongly influenced by the bed slope because the effect of gravity overwhelms the effect of the depth change. In the present paper, we investigate these effects and focus on waves propagating from offshore over a flat ocean basin of constant depth to a beach with a sloping wavy bottom. The waves are incident at a small angle to the beach normal, and the bed slope in the alongshore direction is varied slowly. To simplify the problem, only cnoidal waves and solitary waves are considered and the bed level is varied sinusoidally in the longshore direction.A perturbation method is applied to the two-dimensional nonlinear shallow water equation (two-dimensional NLSWE) for the wave motion in order to generate a more simplified model of wave dynamics consisting of a one-dimensional NLSWE for the direction normal to the beach and an equation for the alongshore direction. The first equation, the one-dimensional NLSWE, is solved by Carrier & Greenspan's transformation. The solution of the second one is found by extending Brocchini & Peregrine's solution for a flat beach. Two methods for the solution of the one- dimensional NLSWE are introduced in order to get a solution applicable to large-amplitude swash motions, where the amplitude is comparable to the beach length. One is the Maclaurin expansion of the solution around the moving shoreline, and the other is Riemann's representation of the solution, which exactly satisfies the one-dimensional NLSWE and the boundary conditions. After doing a consistency check by confirming that Riemann's method, a numerical solution, agrees with the exact solution for an infinitely long, sloping beach, we assumed that the Maclaurin series solution can also describe wave motion in the swash zone properly not only for this model but also for our ‘wavy’, finite beach model.The solution obtained from the Maclaurin series is then plugged into the equation for the alongshore direction to calculate the shore currents induced by wave run-up and back-wash motions, where a ‘weakly two-dimensional solution’ is derived from geometrical considerations. The results show that since the water depth near the shoreline is comparable to the bed level fluctuations, the flow is strongly affected by the bed unevenness, leading to recognizable changes in shoreline movement and the time-averaged velocity and the mass flux of the flow in the swash zone. More specifically, the inhomogeneity of the alongshore mass flux generates offshore currents because of the continuity condition for the fluid mass.


Author(s):  
Dagui Tong ◽  
Chencong Liao ◽  
Jianhua Wang ◽  
Dongsheng Jeng

The wave-structure-seabed interaction (WSSI) around circular rubble-mound breakwater head is investigated using a three-dimensional (3D) numerical scheme. The result reveals that the presence of breakwater has strong effect on wave motion and seabed response. The turbulence induced by the breakwater head gives rise to extensive pore pressure around the breakwater head, which could further lead to liquefaction or scour and might eventually result in breakwater failure.


1966 ◽  
Vol 25 ◽  
pp. 46-48 ◽  
Author(s):  
M. Lecar

“Dynamical mixing”, i.e. relaxation of a stellar phase space distribution through interaction with the mean gravitational field, is numerically investigated for a one-dimensional self-gravitating stellar gas. Qualitative results are presented in the form of a motion picture of the flow of phase points (representing homogeneous slabs of stars) in two-dimensional phase space.


Sign in / Sign up

Export Citation Format

Share Document