Studies on Flow and Pipe Wall Thinning and the Reduction in the Downstream of Orifice Nozzle

2011 ◽  
Author(s):  
Toshihiko Shakouchi ◽  
Takayuki Suzuki ◽  
Hideki Yuya ◽  
Masaki Naruse ◽  
Koichi Tsujimoto ◽  
...  
Keyword(s):  
Cavitation Erosion ◽  
Pipe Wall ◽  
Liquid Droplet ◽  
Piping System ◽  
Droplet Impingement ◽  
Accelerated Corrosion ◽  
Wall Thinning ◽  
System 1 ◽  
Flow Accelerated Corrosion ◽  
Droplet Impingement Erosion

In a piping system of power plant, pipe wall thinning by Flow Accelerated Corrosion, FAC, Liquid Droplet Impingement Erosion, LDI, and Cavitation Erosion, C/E, are very serious problems because they give a damage and lead to the destructtion of the piping system[1]–[6]. In this study, the pipe wall thinning by FAC in the downstream of orifice nozzle, flow meter, is examined. Namely, the characteristics of FAC, generation mechanism, and prediction of the thinning and the reduction are made clear by experimental analysis. As a results, it was made clear that (1) the thinning is occurred mainly according to the size of the pressure fluctuation p′ on the pipe wall and the thinning can be estimated by it, and (2) the suppression of p′ can be realized by replacing the orifice to a taper shaped one having an angle to the upstream.

Effects of Flow Accelerated Corrosion on Piping Steady-State Vibration Evaluations

2003 ◽  
Author(s):  
Brian J. Voll
Keyword(s):  
Steady State ◽  
Nuclear Power ◽  
Power Plants ◽  
Pipe Wall ◽  
Vibration Monitoring ◽  
Accelerated Corrosion ◽  
Monitoring Programs ◽  
Wall Thinning ◽  
Piping Systems ◽  
Flow Accelerated Corrosion

Piping steady-state vibration monitoring programs were implemented during preoperational testing and initial plant startup at most nuclear power plants. Evaluations of piping steady-state vibrations are also performed as piping and component failures attributable to excessive vibration are detected or other potential vibration problems are detected during plant operation. Additionally, as a result of increased flow rates in some piping systems due to extended power uprate (EPU) programs at several plants, new piping steady-state vibration monitoring programs are in various stages of implementation. As plants have aged, pipe wall thinning resulting from flow accelerated corrosion (FAC) has become a recognized industry problem and programs have been established to detect, evaluate and monitor pipe wall thinning. Typically, the piping vibration monitoring and FAC programs have existed separately without interaction. Thus, the potential impact of wall thinning due to FAC on piping vibration evaluations may not be recognized. The potential effects of wall thinning due to FAC on piping vibration evaluations are reviewed. Piping susceptible to FAC and piping susceptible to significant steady-state vibrations, based on industry experience, are identified and compared. Possible methods for establishing links between the FAC and vibration monitoring programs and for accounting for the effects of FAC on both historical and future piping vibration evaluations are discussed.

C219 Velocity field characteristics at pipe-wall thinning position induced by Flow-Accelerated Corrosion

2010 ◽  
Vol 2010.15 (0) ◽  
pp. 367-368
Author(s):  
Masashi Tatematsu ◽  
Sheng Feng ◽  
Shingo Furuya ◽  
Masaya Kondou ◽  
Yoshiyuki Tsuji
Keyword(s):  
Velocity Field ◽  
Pipe Wall ◽  
Accelerated Corrosion ◽  
Wall Thinning ◽  
Flow Accelerated Corrosion

Development of Pipe Wall Thinning Evaluation Method and Prediction Tool

2013 ◽  
Author(s):  
Kimitoshi Yoneda ◽  
Ryo Morita ◽  
Kazutoshi Fujiwara ◽  
Fumio Inada
Keyword(s):  
Power Plants ◽  
Evaluation Method ◽  
Pipe Wall ◽  
Liquid Droplet ◽  
Thickness Measurement ◽  
Management Tool ◽  
Plant Management ◽  
Piping System ◽  
Wall Thinning ◽  
Thinning Rate

Flow accelerated corrosion (FAC) and liquid droplet impingement erosion (LDI) are the main pipe wall thinning phenomena in piping system of power plants in Japan. Authors have promoted the development of prediction method to evaluate local thinning trend by FAC/LDI. To apply the method to pipe wall thinning management in power plants, it is required to be transformed into practical tools for easy usage. In Japan, discussion is being made to considerate the introduction of prediction tools into wall thinning management based on wall thickness measurement at present. Authors have simplified their FAC/LDI models to predict wall thinning trend one-dimensionally along piping layout, and applied to actual thinning data of power plants. With PWR’s FAC data and BWR’s LDI data, maximum thinning rate for each pipe elements were roughly predictable with considerable accuracy. Especially for high thinning rate data, which is important in plant management, the model was able to evaluate within the factor of 2. By installing this model, prediction software “FALSET” was developed, equipped with practical functions for the management. With the further verification and improvement of each function, there are prospects for this software to be utilized as a management tool in power plants.

Sign in / Sign up

Export Citation Format

Share Document