Structural Damage Assessment Using Output-Only Measurement: Localization and Quantification

2013 ◽  
Author(s):  
Chin-Hsiung Loh ◽  
Min-Hsuan Tseng ◽  
Shu-Hsien Chao
Keyword(s):  
Damage Detection ◽  
Damage Assessment ◽  
Structural Damage ◽  
Damage Identification ◽  
Model Updating ◽  
Null Space ◽  
Singular Spectrum Analysis ◽  
Damage Index ◽  
Computation Efficiency ◽  
Output Only

One of the important issues to conduct the damage detection of a structure using vibration-based damage detection (VBDD) is not only to detect the damage but also to locate and quantify the damage. In this paper a systematic way of damage assessment, including identification of damage location and damage quantification, is proposed by using output-only measurement. Four level of damage identification algorithms are proposed. First, to identify the damage occurrence, null-space and subspace damage index are used. The eigenvalue difference ratio is also discussed for detecting the damage. Second, to locate the damage, the change of mode shape slope ratio and the prediction error from response using singular spectrum analysis are used. Finally, to quantify the damage the RSSI-COV algorithm is used to identify the change of dynamic characteristics together with the model updating technique, the loss of stiffness can be identified. Experimental data collected from the bridge foundation scouring in hydraulic lab was used to demonstrate the applicability of the proposed methods. The computation efficiency of each method is also discussed so as to accommodate the online damage detection.

A Multi-State Strategy for Structural Damage Detection Using Sensitivity of Weighted Transmissibility Function

2021 ◽  
pp. 2150144
Author(s):  
Ziwei Luo ◽  
Huanlin Liu ◽  
Ling Yu
Keyword(s):  
Damage Detection ◽  
Structural Damage ◽  
Model Updating ◽  
Structural Parameters ◽  
Experimental Studies ◽  
Fe Model ◽  
Limited Information ◽  
Structural Damage Detection ◽  
State Strategy ◽  
Output Only

In practice, a model-based structural damage detection (SDD) method is helpful for locating and quantifying damages with the aid of reasonable finite element (FE) model. However, only limited information in single or two structural states is often used for model updating in existing studies, which is not reasonable enough to represent real structures. Meanwhile, as an output-only damage indicator, transmissibility function (TF) is proven to be effective for SDD, but it is not sensitive enough to change in structural parameters. Therefore, a multi-state strategy based on weighted TF (WTF) is proposed to improve sensitivity of TF to change in parameters and in order to further obtain a more reasonable FE model for SDD in this study. First, WTF is defined by TF weighted with element stiffness matrix, and relationships between WTFs and change in structural parameters are established based on sensitivity analysis. Then, a multi-state strategy is proposed to obtain multiple structural states, which is used to reasonably update the FE model and detect structural damages. Meanwhile, due to fabrication errors, a two-stage scheme is adopted to reduce the global and local discrepancy between the real structure and the FE model. Further, the [Formula: see text]-norm and the [Formula: see text]-norm regularization techniques are, respectively, introduced for both model updating and SDD problems by considering the characteristics of problems. Finally, the effectiveness of the proposed method is verified by a simply supported beam in numerical simulations and a six-storey frame in laboratory. From the simulation results, it can be seen that the sensitivity to structural damages can be improved by the definition of WTF. For the experimental studies, compared with the FE model updated from the single structural state, the FE model obtained by the multi-state strategy has an ability to more reasonably describe the change of states in the frame. Moreover, for the given structural damages, the proposed method can detect damage locations and degrees accurately, which shows the validity of the proposed method and the reliability of the updated FE model.

A One Stage Damage Detection Technique Using Spectral Density Analysis and Parallel Genetic Algorithms

2013 ◽  
Vol 558 ◽  
pp. 1-11 ◽  
Author(s):  
Maryam Varmazyar ◽  
Nicholas Haritos ◽  
Michael Kirley ◽  
Tim Peterson
Keyword(s):  
Spectral Density ◽  
Damage Detection ◽  
Structural Damage ◽  
Damage Identification ◽  
Search Space ◽  
Model Parameters ◽  
Multiple Time ◽  
One Stage ◽  
Periodic Monitoring ◽  
Output Only

This paper describes a new global damage identification framework for the continuous/periodic monitoring of civil structures. In order to localize and estimate the severity of damage regions, a one-stage model-based Bayesian probabilistic damage detection approach is proposed. This method, which is based on the response power spectral density of the structure, enjoys the advantage of broadband frequency information and can be implemented on input-output as well as output-only damage identification studies. A parallel genetic algorithm is subsequently used to evolve the optimal model parameters introduced for different damage conditions. Given the complex search space and the need to perform multiple time-consuming objective function evaluations, a parallel meta-heuristic provides a robust optimization tool in this domain. It is shown that this approach is capable of detecting structural damage in both noisy and noise-free environments.

Study on Damage Location of Spatial Structures Based on Wavelet Analysis of Model Strain Energy

2013 ◽  
Vol 639-640 ◽  
pp. 1033-1037
Author(s):  
Yong Mei Li ◽  
Bing Zhou ◽  
Guo Fu Sun ◽  
Bo Yan Yang
Keyword(s):  
Wavelet Analysis ◽  
Damage Detection ◽  
Structural Damage ◽  
Strain Energy ◽  
Damage Identification ◽  
Damage Index ◽  
Structural Damage Detection ◽  
Modal Strain Energy ◽  
Wavelet Method ◽  
Long Span

The research to identify and locate the damage to the engineering structure mainly aimed at some simple structure forms before, such as beam and framework. Damage shows changes of local characteristics of the signal, while wavelet analysis can reflect local damage traits of the signal in time domain and frequency domain. For confirming the validity and applicability of structural damage identification methods, wavelet analysis is used to spatial structural damage detection. The wavelet analysis technique provides new ideas and methods of spatial steel structural damage detection. Based on the theory of wavelet singularity detection，with the injury signal of modal strain energy as structural damage index，the mixing of the modal strain energy and wavelet method to identify and locate the damage to the spatial structure is considered. The multiplicity of the bars and nodes can be taken into account, and take the destructive and nondestructive modal strain energy of Kiewitt-type reticulated shell with 40m span as an example of numerical simulation，the original damage signal and the damage signal after wavelet transformation is compared. The location of the declining stiffness identified by the maximum of wavelet coefficients，analyzed as signal by db1 wavelet，and calculate the graph relation between coefficients of the wavelets and the damage to the structure by discrete or continuous wavelet transform, and also check the accuracy degree of this method with every damage case. Finally，the conclusion is drawn that the modal strain energy and wavelet method to identify and locate the damage to the long span reticulated shell is practical, effective and accurate, that the present method as a reliable and practical way can be adopted to detect the single and several locations of damage in structures.

A pseudo-modal structural damage index based on orthogonal empirical mode decomposition

2019 ◽  
Vol 233 (23-24) ◽  
pp. 7545-7564 ◽  
Author(s):  
Egidio Lofrano ◽  
Francesco Romeo ◽  
Achille Paolone
Keyword(s):  
Empirical Mode Decomposition ◽  
Structural Damage ◽  
Degrees Of Freedom ◽  
Damage Identification ◽  
Damage Index ◽  
Experimental Tests ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition ◽  
Identification Technique ◽  
Output Only

A structural damage identification technique hinged on the combination of orthogonal empirical mode decomposition and modal analysis is proposed. The output-only technique is based on the comparison between pre- and post-damage free structural vibrations signals. The latter are either kinematic (displacements, velocities or accelerations) or deformation measures (strains or curvatures). The response data are decomposed by means of the orthogonal empirical mode decomposition to derive a finite set of orthogonal intrinsic mode functions; the latter are used as a multi-frequency and data-driven basis to build pseudo-modal shapes. A new damage index, the so-called pseudo-mode index, is introduced to compare the response obtained for the two states of the structural system and detect potential damages. The performance of the devised index in detecting a localised damage is shown through numerical and experimental tests on two structural models, namely a 4-degrees-of-freedom system and a two-hinged parabolic arch.

Sparse damage detection via the elastic net method using modal data

2021 ◽  
pp. 147592172110219
Author(s):  
Rongrong Hou ◽  
Xiaoyou Wang ◽  
Yong Xia
Keyword(s):  
Damage Detection ◽  
Structural Damage ◽  
Damage Identification ◽  
Measurement Data ◽  
Elastic Net ◽  
Sensitivity Matrix ◽  
Regularization Technique ◽  
Modal Data ◽  
Regularization Techniques ◽  
Net Method

The l1 regularization technique has been developed for damage detection by utilizing the sparsity feature of structural damage. However, the sensitivity matrix in the damage identification exhibits a strong correlation structure, which does not suffice the independency criteria of the l1 regularization technique. This study employs the elastic net method to solve the problem by combining the l1 and l2 regularization techniques. Moreover, the proposed method enables the grouped structural damage being identified simultaneously, whereas the l1 regularization cannot. A numerical cantilever beam and an experimental three-story frame are utilized to demonstrate the effectiveness of the proposed method. The results showed that the proposed method is able to accurately locate and quantify the single and multiple damages, even when the number of measurement data is much less than the number of elements. In particular, the present elastic net technique can detect the grouped damaged elements accurately, whilst the l1 regularization method cannot.

scholarly journals Development of a Novel Damage Detection Framework for Truss Railway Bridges Using Operational Acceleration and Strain Response

Vibration ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 422-445
Author(s):  
Md Riasat Azim ◽  
Mustafa Gül
Keyword(s):  
Damage Detection ◽  
Damage Identification ◽  
Numerical Study ◽  
Damage Index ◽  
Strain Analysis ◽  
Time History ◽  
Principal Component ◽  
Element Model ◽  
Railway Bridges ◽  
Truss Bridge

Railway bridges are an integral part of any railway communication network. As more and more railway bridges are showing signs of deterioration due to various natural and artificial causes, it is becoming increasingly imperative to develop effective health monitoring strategies specifically tailored to railway bridges. This paper presents a new damage detection framework for element level damage identification, for railway truss bridges, that combines the analysis of acceleration and strain responses. For this research, operational acceleration and strain time-history responses are obtained in response to the passage of trains. The acceleration response is analyzed through a sensor-clustering-based time-series analysis method and damage features are investigated in terms of structural nodes from the truss bridge. The strain data is analyzed through principal component analysis and provides information on damage from instrumented truss elements. A new damage index is developed by formulating a strategy to combine the damage features obtained individually from both acceleration and strain analysis. The proposed method is validated through a numerical study by utilizing a finite element model of a railway truss bridge. It is shown that while both methods individually can provide information on damage location, and severity, the new framework helps to provide substantially improved damage localization and can overcome the limitations of individual analysis.

FEM Free Damage Detection of Beam Structures Using the Deflections Estimated by Modal Flexibility Matrix

2021 ◽  
pp. 2150128
Author(s):  
Wen-Yu He ◽  
Wei-Xin Ren ◽  
Lei Cao ◽  
Quan Wang
Keyword(s):  
Damage Detection ◽  
Structural Damage ◽  
Damage Index ◽  
Element Model ◽  
Mode Shapes ◽  
Beam Structures ◽  
Flexibility Matrix ◽  
Damage Quantification ◽  
Modal Flexibility ◽  
The Cost

The deflection of the beam estimated from modal flexibility matrix (MFM) indirectly is used in structural damage detection due to the fact that deflection is less sensitive to experimental noise than the element in MFM. However, the requirement for mass-normalized mode shapes (MMSs) with a high spatial resolution and the difficulty in damage quantification restricts the practicability of MFM-based deflection damage detection. A damage detection method using the deflections estimated from MFM is proposed for beam structures. The MMSs of beams are identified by using a parked vehicle. The MFM is then formulated to estimate the positive-bending-inspection-load (PBIL) caused deflection. The change of deflection curvature (CDC) is defined as a damage index to localize damage. The relationship between the damage severity and the deflection curvatures is further investigated and a damage quantification approach is proposed accordingly. Numerical and experimental examples indicated that the presented approach can detect damages with adequate accuracy at the cost of limited number of sensors. No finite element model (FEM) is required during the whole detection process.

scholarly journals Detection of Sparse Damages in Structures

2019 ◽  
Author(s):  
Natalia Sabourova ◽  
Niklas Grip ◽  
Ulf Ohlsson ◽  
Lennart Elfgren ◽  
Yongming Tu ◽  
...  
Keyword(s):  
Structural Damage ◽  
Damage Identification ◽  
Model Updating ◽  
Element Model ◽  
Total Variation Regularization ◽  
Regularization Technique ◽  
Spatial Properties ◽  
Ill Posed ◽  
Pros And Cons ◽  
Kirchhoff Plate Model

<p>Structural damage is often a spatially sparse phenomenon, i.e. it occurs only in a small part of the structure. This property of damage has not been utilized in the field of structural damage identification until quite recently, when the sparsity-based regularization developed in compressed sensing problems found its application in this field.</p><p>In this paper we consider classical sensitivity-based finite element model updating combined with a regularization technique appropriate for the expected type of sparse damage. Traditionally, (I), &#119897;2- norm regularization was used to solve the ill-posed inverse problems, such as damage identification. However, using already well established, (II), &#119897;l-norm regularization or our proposed, (III), &#119897;l-norm total variation regularization and, (IV), general dictionary-based regularization allows us to find damages with special spatial properties quite precisely using much fewer measurement locations than the number of possibly damaged elements of the structure. The validity of the proposed methods is demonstrated using simulations on a Kirchhoff plate model. The pros and cons of these methods are discussed.</p>

Sign in / Sign up

Export Citation Format

Share Document