Composite filter for Vanderlugt correlator

Author(s):  
Craig I. Watson ◽  
Patrick J. Grother ◽  
Eung Gi Paek ◽  
Charles L. Wilson
RSC Advances ◽  
2015 ◽  
Vol 5 (112) ◽  
pp. 91951-91959 ◽  
Author(s):  
Yang Zhao ◽  
Zhaoxiang Zhong ◽  
Ze-Xian Low ◽  
Zhong Yao

Carbon nanotubes (CNTs) are very small diameter fibers that have the potential to be integrated into filters to further increase particle capture efficiency.


1995 ◽  
Author(s):  
J.E. Lane ◽  
C.J. Painter ◽  
K.C. LeCostaouec, J.F. Radford

2014 ◽  
Vol 4 (2) ◽  
pp. 200-205 ◽  
Author(s):  
Bernard Thole

One of the parameters that impact on fluoride sorption capacities of materials in water defluoridation is initial concentration. Water from various sources will have different fluoride concentrations; as such the employment of a particular media in defluoridation requires information on how the media will perform in different concentrations. Consequently, research was carried out to determine how initial fluoride concentrations in raw water affect capacity in defluoridation with bauxite, gypsum, magnesite and their composite, and to investigate the possibility of predicting loading capacity of their composite filter through initial fluoride concentration to optimize their application in defluoridation. The results showed that sorption capacities increased with increase in initial concentrations. However, higher starting concentrations resulted in larger residual fluoride concentrations; as such the benefit of large sorption capacities obtained was overshadowed. Polynomial relations of capacity (Cs, mg/g) and initial concentration (Co, mg/l), were obtained for bauxite and gypsum. Magnesite obtained a logarithmic relation for Cs and Co. A power relation was obtained between Cs and Co for their composite, Cs = 0.0328C1.20160. Approximation of capacities of this composite from initial fluoride concentrations was feasible. Water defluoridation has become important as a result of dental and skeletal fluorosis.


1999 ◽  
Vol 163 (4-6) ◽  
pp. 169-174
Author(s):  
Jinn Tsai ◽  
Shiuan-Huei Lin ◽  
Tai-Chiung Hsieh ◽  
Ken Hsu

2019 ◽  
Vol 80 (2) ◽  
pp. 223-231
Author(s):  
Yixuan Xie ◽  
Ajun Wan ◽  
Xingmin Wang ◽  
Hengjie Dong ◽  
Yunpeng Wu

Abstract In this study, we use an anaerobic-aerobic integrated denitrification (Fe/C-ZACID) device with an iron-carbon-activated carbon and zeolite composite filter to remove nitrogen from simulated low carbon-nitrogen ratio (C/N) sewage. The impacts of dissolved oxygen (DO) level, hydraulic retention time (HRT), C/N and nitrate recirculation ratio on denitrification performance were studied. The results show that when HRT was 6 h, DO was 3 ± 0.1 mg/L, influent C/N was 3, and nitrate recirculation ratio was 100%, and removal rates of 95% for ammonia and 85% for total nitrogen (TN) were achieved. A beaker comparison test demonstrated that this synergistic denitrification system included heterotrophic denitrification, physicochemical denitrification, iron autotrophic denitrification and hydrogen autotrophic denitrification, etc. The Fe/C-ZACID device has a high-efficiency nitrogen removal effect for low C/N ratio sewage and strong shock resistance, which provides technical support and a theoretical basis for advanced denitrification of rural domestic sewage.


Sign in / Sign up

Export Citation Format

Share Document