Light source fluctuation effect on confocal imaging system

2002 ◽  
Author(s):  
Anand K. Asundi ◽  
Chongxiang Li ◽  
Yanfeng Zhang ◽  
Zhong P. Fang
2021 ◽  
Author(s):  
Wen-Ting Li ◽  
Le Wang ◽  
Wei Li ◽  
Sheng-Mei Zhao

Abstract The transmission loss of photons during quantum key distribution(QKD) process leads to the linear key rate bound for practical QKD systems without quantum repeaters. Phase matching quantum key distribution (PM-QKD) protocol, an novel QKD protocol, can overcome the constraint with a measurement-device-independent structure, while it still requires the light source to be ideal. This assumption is not guaranteed in practice, leading to practical secure issues. In this paper, we propose a modified PM-QKD protocol with a light source monitoring, named PM-QKD-LSM protocol, which can guarantee the security of the system under the non-ideal source condition. The results show that our proposed protocol performs almost the same as the ideal PM-QKD protocol even considering the imperfect factors in practical systems. PM-QKD-LSM protocol has a better performance with source fluctuation, and it is robust in symmetric or asymmetric cases.


2017 ◽  
Author(s):  
Yusuke Shigeta ◽  
Toshitaka Agano ◽  
Naoto Sato ◽  
Hitoshi Nakatsuka ◽  
Kazuo Kitagawa ◽  
...  

2019 ◽  
Vol 90 (2) ◽  
pp. 026107
Author(s):  
Huijie Wang ◽  
Yifan Hu ◽  
Xiangyun Ma ◽  
Jinglai Sun ◽  
Xueqing Sun ◽  
...  

2019 ◽  
Vol 19 (1) ◽  
Author(s):  
Valentina Sarao ◽  
Daniele Veritti ◽  
Enrico Borrelli ◽  
Srini Vas R. Sadda ◽  
Enea Poletti ◽  
...  

Abstract Background Conventional flash fundus cameras capture color images that are oversaturated in the red channel and washed out in the green and blue channels, resulting in a retinal picture that often looks flat and reddish. A white LED confocal device was recently introduced to provide a high-quality retinal image with enhanced color fidelity. In this study, we aimed to evaluate the color rendering properties of the white LED confocal system and compare them to those of a conventional flash fundus camera through chromaticity analysis. Methods A white LED confocal device (Eidon, Centervue, Padova, Italy) and a traditional flash fundus camera (TRC-NW8, Topcon Corporation, Tokyo, Japan) were used to capture fundus images. Color images were evaluated with respect to chromaticity. Analysis was performed according to the image color signature. The color signature of an image was defined as the distribution of its pixels in the rgb chromaticity space. The descriptors used for the analysis are the average and variability of the barycenter positions, the average of the variability and the number of unique colors (NUC) of all signatures. Results Two hundred thirty-three color photographs were acquired with each retinal camera. The images acquired by the confocal white LED device demonstrated an average barycenter position (rgb = [0.448, 0.328, 0.224]) closer to the center of the chromaticity space, while the conventional fundus camera provides images with a clear shift toward red at the expense of the blue and green channels (rgb = [0.574, 0.278, 0.148] (p < 0.001). The variability of the barycenter positions was higher in the white LED confocal system than in the conventional fundus camera. The average variability of the distributions was higher (0.003 ± 0.007, p < 0.001) in the Eidon images compared to the Topcon camera, indicating a greater richness of color. The NUC percentage was higher for the white LED confocal device than for the conventional flash fundus camera (0.071% versus 0.025%, p < 0.001). Conclusions Eidon provides more-balanced color images, with a wider richness of color content, compared to a conventional flash fundus camera. The overall higher chromaticity of Eidon may provide benefits in terms of discriminative power and diagnostic accuracy.


2020 ◽  
Vol 57 (9) ◽  
pp. 1043-1047
Author(s):  
Enrico Borrelli ◽  
Lea Querques ◽  
Rosangela Lattanzio ◽  
Michele Cavalleri ◽  
Alessio Grazioli Moretti ◽  
...  

Micromachines ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 148
Author(s):  
Xuefeng Chang ◽  
Kang Zheng ◽  
Dan Xie ◽  
Xiayun Shu ◽  
Keyu Xu ◽  
...  

An in situ image acquisition apparatus based on delay triggering for visualizing microdroplets formation is described. The imaging system includes a charge-coupled device camera, a motion control card, a driving circuit, a time delay triggering circuit, and a light source. By adjusting the varying trigger delay time which is synchronized with respect to the signal for jetting, the steady sequential images of the droplet flying in free space can be captured real-time by the system. Several image processing steps are taken to measure the diameters and coordinates of the droplets. Also, the jetting speeds can be calculated according to the delay time interval. For glycerin/water (60:40, mass ratio), under the given conditions of the self-made pneumatically diaphragm-driven drop-on-demand inkjet apparatus, the average of diameter and volume are measured as 266.8 μm and 9944 pL, respectively, and the maximum average velocity of the microdroplets is 0.689 m/s. Finally, the imaging system is applied to measure the volume of 200 microsolder balls generated from the inkjet apparatus. The average diameter is 87.96 μm, and the relative standard deviation is 0.83%. The results show good reproducibility. Unlike previous stroboscopic techniques, the present in situ imaging system which is absence of instantaneous high intensity light employs two control signals to stimulate the microdroplet generator and the charge-coupled device (CCD) camera. Hence, the system can avoid the desynchronization problem of signals which control the strobe light-emitting diode (LED) light source and the camera in previous equipment. This technology is a reliable and cost-effective approach for capturing and measuring microdroplets.


2010 ◽  
Author(s):  
A. Toya ◽  
N. Sasaki ◽  
S. Kubota ◽  
T. Kikkawa

Sign in / Sign up

Export Citation Format

Share Document