V-belt transverse vibration measurement by means of laser Doppler vibrometry

Author(s):  
A. Agnani ◽  
M. Martarelli ◽  
E. P. Tomasini
2017 ◽  
Vol 99 ◽  
pp. 11-22 ◽  
Author(s):  
S.J. Rothberg ◽  
M.S. Allen ◽  
P. Castellini ◽  
D. Di Maio ◽  
J.J.J. Dirckx ◽  
...  

2021 ◽  
Vol 70 ◽  
pp. 1-10
Author(s):  
Sara Casaccia ◽  
Erik J. Sirevaag ◽  
Mark G. Frank ◽  
Joseph A. O'Sullivan ◽  
Lorenzo Scalise ◽  
...  

2015 ◽  
Vol 24 (4) ◽  
pp. 1038-1042 ◽  
Author(s):  
Celso Accoto ◽  
Antonio Qualtieri ◽  
Ferruccio Pisanello ◽  
Carlo Ricciardi ◽  
Candido Fabrizio Pirri ◽  
...  

2021 ◽  
pp. 2150350
Author(s):  
Yijun Jiang ◽  
Mingyuan Lu ◽  
Shiliang Wang ◽  
Han Huang

Temperature dependence of Young’s modulus of Ag microwhiskers was determined by a laser Doppler vibrometer. The Ag whiskers with diameters in sub-microns were synthesized by the use of physical vapor deposition (PVD). They have a five-fold twinned structure grown along the [1 1 0] direction. The temperature coefficient of Young’s modulus was measured to be [Formula: see text] ppm/K in the range of 300 K to 650 K. The measured values are very close to the reported values of [Formula: see text] ppm/K for bulk Ag single crystals. This finding can benefit the design of Ag-based micro/nano-electromechanical systems or micro/nano-interconnectors operated at elevated or lowered temperatures.


2021 ◽  
Author(s):  
Sejong Chun ◽  
Sibok Lee ◽  
Hyewon Yoon

Abstract Thermowells with helical strakes are becoming promising to prevent them from fatigue fracture by Kármán vortex street. Many studies suggest various kinds of measurement techniques, including strain rate measurement, acceleration measurement, and high-speed visualization to evaluate the role of Kármán vortex street to the flow-induced vibration. Nevertheless, use of laser Doppler vibrometry has not yet been reported in the literature. This study compared the tip deflection of a thermowell due to the flow-induced vibration by using the laser Doppler vibrometry and the strain rate measurement. The laser Doppler vibrometry could measure the tip deflection directly. On the other hand, the strain rate measurement had to convert the strain rate into the tip deflection through the Euler-Bernoulli beam theory. Measurement equivalence between the laser Doppler vibrometry and the strain rate measurement was discussed with the results of tip deflections of the thermowell.


Sign in / Sign up

Export Citation Format

Share Document