In this article a new 3D measurement system along with the study on 3D printing technology is presented from the perspective of quality of reproduction. In the first part of the paper the 3DMADMAC|SPECTRAL system which integrates 3D shape with additional color and angular reflectance measurement capabilities is presented (see Figure 1). The shape measurement system is based on structured light projection with the use of a DLP projector. The 3D shape measurement method is based on sinusoidal fringes and Gray codes projection. Color is being measured using multispectral images with a set of interference filters to separate spectral channels. Additionally the set up includes an array of compact light sources for measuring angular reflectance based on image analysis and 3D data processing. All three components of the integrated system use the same greyscale camera as a detector. The purpose of the system is to obtain complete information about shape, color and reflectance characteristic of mea sured surface, especially for cultural heritage objects - in order to create high quality 3D documentation. In the second part of the paper the 3D printing technology will be tested on real measured cultural heritage objects. Tests allow to assess measurement and color accuracy of reproduction by selected 3D printing technology and shed some light on how current 3D printing technology can be applied into cultural heritage.
3DMADMAC|SPECTRAL: Hardware and Software Solution for Integrated Digitization of 3D Shape, Multispectral Color and BRDF for Cultural Heritage Documentation