scholarly journals Conservative Duplication of Spindle Poles during Meiosis in Saccharomyces cerevisiae

2001 ◽  
Vol 183 (7) ◽  
pp. 2372-2375 ◽  
Author(s):  
Andreas Wesp ◽  
Susanne Prinz ◽  
Gerald R. Fink
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Spore Formation ◽  
Wild Type ◽  
Body Distribution ◽  
Spindle Poles ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Type Strains

ABSTRACT During sporulation in diploid Saccharomyces cerevisiae, spindle pole bodies acquire the so-called meiotic plaque, a prerequisite for spore formation. Mpc70p is a component of the meiotic plaque and is thus essential for spore formation. We show here that MPC70/mpc70 heterozygous strains most often produce two spores instead of four and that these spores are always nonsisters. In wild-type strains, Mpc70p localizes to all four spindle pole bodies, whereas in MPC70/mpc70 strains Mpc70p localizes to only two of the four spindle pole bodies, and these are always nonsisters. Our data can be explained by conservative spindle pole body distribution in which the two newly synthesized meiosis II spindle pole bodies of MPC70/mpc70 strains lack Mpc70p.

S. pombe sporulation-specific coiled-coil protein Spo15p is localized to the spindle pole body and essential for its modification

2000 ◽  
Vol 113 (3) ◽  
pp. 545-554 ◽  
Author(s):  
S. Ikemoto ◽  
T. Nakamura ◽  
M. Kubo ◽  
C. Shimoda
Keyword(s):  
Life Cycle ◽  
Fusion Gene ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Wild Type ◽  
Membrane Formation ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Meiotic Spindles

Spindle pole bodies in the fission yeast Schizosaccharomyces pombe are required during meiosis, not only for spindle formation but also for the assembly of forespore membranes. The spo15 mutant is defective in the formation of forespore membranes, which develop into spore envelopes. The spo15(+)gene encodes a protein with a predicted molecular mass of 223 kDa, containing potential coiled-coil regions. The spo15 gene disruptant was not lethal, but was defective in spore formation. Northern and western analyses indicated that spo15(+) was expressed not only in meiotic cells but also in vegetative cells. When the spo15-GFP fusion gene was expressed by the authentic spo15 promoter during vegetative growth and sporulation, the fusion protein colocalized with Sad1p, which is a component of spindle pole bodies. Meiotic divisions proceeded in spo15delta cells with kinetics similar to those in wild-type cells. In addition, the morphology of the mitotic and meiotic spindles and the nuclear segregation were normal in spo15delta. Intriguingly, transformation of spindle pole bodies from a punctate to a crescent form prior to forespore membrane formation was not observed in spo15delta cells. We conclude that Spo15p is associated with spindle pole bodies throughout the life cycle and plays an indispensable role in the initiation of spore membrane formation.

scholarly journals Saccharomyces cerevisiae Mob1p Is Required for Cytokinesis and Mitotic Exit

2001 ◽  
Vol 21 (20) ◽  
pp. 6972-6983 ◽  
Author(s):  
Francis C. Luca ◽  
Manali Mody ◽  
Cornelia Kurischko ◽  
David M. Roof ◽  
Thomas H. Giddings ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Mitotic Exit ◽  
Live Cells ◽  
Ring Assembly ◽  
Spindle Poles ◽  
Spindle Pole Bodies ◽  
Bud Neck ◽  
Mitotic Cyclin

ABSTRACT The Saccharomyces cerevisiae mitotic exit network (MEN) is a conserved set of genes that mediate the transition from mitosis to G1 by regulating mitotic cyclin degradation and the inactivation of cyclin-dependent kinase (CDK). Here, we demonstrate that, in addition to mitotic exit, S. cerevisiae MEN gene MOB1 is required for cytokinesis and cell separation. The cytokinesis defect was evident in mob1mutants under conditions in which there was no mitotic-exit defect. Observation of live cells showed that yeast myosin II, Myo1p, was present in the contractile ring at the bud neck but that the ring failed to contract and disassemble. The cytokinesis defect persisted for several mitotic cycles, resulting in chains of cells with correctly segregated nuclei but with uncontracted actomyosin rings. The cytokinesis proteins Cdc3p (a septin), actin, and Iqg1p/ Cyk1p (an IQGAP-like protein) appeared to correctly localize inmob1 mutants, suggesting that MOB1functions subsequent to actomyosin ring assembly. We also examined the subcellular distribution of Mob1p during the cell cycle and found that Mob1p first localized to the spindle pole bodies during mid-anaphase and then localized to a ring at the bud neck just before and during cytokinesis. Localization of Mob1p to the bud neck requiredCDC3, MEN genes CDC5,CDC14, CDC15, and DBF2, and spindle pole body gene NUD1 but was independent ofMYO1. The localization of Mob1p to both spindle poles was abolished in cdc15 and nud1 mutants and was perturbed in cdc5 and cdc14mutants. These results suggest that the MEN functions during the mitosis-to-G1 transition to control cyclin-CDK inactivation and cytokinesis.

The fine structure of ascospore delimitation in the yeast Wickerhamia fluorescens

1973 ◽  
Vol 19 (11) ◽  
pp. 1389-1392 ◽  
Author(s):  
Lynn Rooney ◽  
Peter B. Moens
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Fine Structure ◽  
Outer Membrane ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Spore Wall ◽  
Serial Sections ◽  
Spore Body ◽  
Pole Body ◽  
Spindle Pole Bodies

Photographic records of complete serial sections of asci in different stages of sporulation show that one of the four nuclear lobes produced during meiosis in the ascus of the yeast Wickerhamia fluorescens has a complex spindle-pole body, which is the site from where the presumptive ascospore wall, or prospore wall, develops and eventually surrounds the ascospore nucleus and associated cytoplasm. The three remaining nuclei develop spindle-pole bodies and prospore walls to lesser and varying degrees. With few exceptions, all three degenerate. The outer membrane of the prospore wall forms a fold, or rim, on the outside of the spore. Thickening of the spore wall takes place first in the asymmetric ring, then around the spore body, and finally at the site where the nucleus is associated with the wall. It is shown that ascospore delimitation in W. fluorescens and Saccharomyces cerevisiae are similar to each other, and that it differs from the type observed in a number of Euascomycetes.

scholarly journals ADY1, A Novel Gene Required for Prospore Membrane Formation at Selected Spindle Poles inSaccharomyces cerevisiae

2001 ◽  
Vol 12 (9) ◽  
pp. 2646-2659 ◽  
Author(s):  
Changchun Deng ◽  
William S. Saunders
Keyword(s):  
Meiotic Chromosome ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Membrane Formation ◽  
Spindle Poles ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Prospore Membrane ◽  
A Cell ◽  
Body Component

ADY1 is identified in a genetic screen for genes on chromosome VIII of Saccharomyces cerevisiae that are required for sporulation. ADY1 is not required for meiotic recombination or meiotic chromosome segregation, but it is required for the formation of four spores inside an ascus. In the absence of ADY1, prospore formation is restricted to mainly one or two spindle poles per cell. Moreover, the two spores in the dyads of the ady1 mutant are predominantly nonsisters, suggesting that the proficiency to form prospores is not randomly distributed to the four spindle poles in theady1 mutant. Interestingly, the meiosis-specific spindle pole body component Mpc54p, which is known to be required for prospore membrane formation, is localized predominantly to only one or two spindle poles per cell in the ady1 mutant. A partially functional Myc-Pfs1p is localized to the nucleus of mononucleate meiotic cells but not to the spindle pole body or prospore membrane. These results suggest that Pfs1p is specifically required for prospore formation at selected spindle poles, most likely by ensuring the functionality of all four spindle pole bodies of a cell during meiosis II.

scholarly journals Outer plaque assembly and spore encapsulation are defective during sporulation of adenylate cyclase-deficient mutants of Saccharomyces cerevisiae.

1985 ◽  
Vol 100 (6) ◽  
pp. 1854-1862 ◽  
Author(s):  
I Uno ◽  
K Matsumoto ◽  
A Hirata ◽  
T Ishikawa
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Adenylate Cyclase ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Sensitive Period ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Diploid Cells

Sporulation in diploid cells homozygous for the cyr1-2 mutation of the yeast Saccharomyces cerevisiae was examined. This mutation causes a defect in adenylate cyclase and temperature-sensitive arrest in the G1 phase of the mitotic cell cycle. The cyr1-2/cyr1-2 diploid cells were able to initiate meiotic divisions, but produced predominantly two-spored asci at the restrictive temperature. Temperature-sensitive period for production of two-spored asci was approximately 12 h after the transfer of cells to the sporulation medium. The levels of cAMP increased during this period in the wild type and cyr1-2/cyr1-2 diploid cells incubated at the permissive temperature, but remained at an extremely low level in the cyr1-2/cyr1-2 diploid cells incubated at the restrictive temperature. Dyad analysis of the cyr1-2 strain indicated that meiotic products were randomly included into ascospores. Fluorescent microscopy of the cyr1-2/cyr1-2 diploid cells incubated at the restrictive temperature revealed that individual haploid nuclei were enclosed in each of the two spores after meiosis. About half of the cyr1-2/cyr1-2 diploid cells entered normal meiosis 1 producing two normal spindle pole bodies with inner and outer plaques, and the other half entered abnormal meiosis 1 producing one normal spindle pole body and one defective spindle pole body without out plaque. At meiosis II, some cells contained a pair of normal spindle pole bodies and other cells contained pairs of normal and abnormal spindle pole bodies.

scholarly journals Structural role of Sfi1p–centrin filaments in budding yeast spindle pole body duplication

2006 ◽  
Vol 173 (6) ◽  
pp. 867-877 ◽  
Author(s):  
Sam Li ◽  
Alan M. Sandercock ◽  
Paul Conduit ◽  
Carol V. Robinson ◽  
Roger L. Williams ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Saccharomyces Cerevisiae ◽  
Crystal Structures ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
N Terminus ◽  
Α Helix

Centrins are calmodulin-like proteins present in centrosomes and yeast spindle pole bodies (SPBs) and have essential functions in their duplication. The Saccharomyces cerevisiae centrin, Cdc31p, binds Sfi1p on multiple conserved repeats; both proteins localize to the SPB half-bridge, where the new SPB is assembled. The crystal structures of Sfi1p–centrin complexes containing several repeats show Sfi1p as an α helix with centrins wrapped around each repeat and similar centrin–centrin contacts between each repeat. Electron microscopy (EM) shadowing of an Sfi1p–centrin complex with 15 Sfi1 repeats and 15 centrins bound showed filaments 60 nm long, compatible with all the Sfi1 repeats as a continuous α helix. Immuno-EM localization of the Sfi1p N and C termini showed Sfi1p–centrin filaments spanning the length of the half-bridge with the Sfi1p N terminus at the SPB. This suggests a model for SPB duplication where the half-bridge doubles in length by association of the Sfi1p C termini, thereby providing a new Sfi1p N terminus to initiate SPB assembly.

scholarly journals kem mutations affect nuclear fusion in Saccharomyces cerevisiae.

Genetics ◽  
1990 ◽  
Vol 126 (4) ◽  
pp. 799-812 ◽  
Author(s):  
J Kim ◽  
P O Ljungdahl ◽  
G R Fink
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Null Allele ◽  
Nitrogen Starvation ◽  
Nuclear Fusion ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Wild Type ◽  
Reading Frame ◽  
Pole Body ◽  
Fusion Defect

Abstract We have identified mutations in three genes of Saccharomyces cerevisiae, KEM1, KEM2 and KEM3, that enhance the nuclear fusion defect of kar1-1 yeast during conjugation. The KEM1 and KEM3 genes are located on the left arm of chromosome VII. Kem mutations reduce nuclear fusion whether the kem and the kar1-1 mutations are in the same or in different parents (i.e., in both kem kar1-1 X wild-type and kem X kar 1-1 crosses). kem 1 X kem 1 crosses show a defect in nuclear fusion, but kem 1 X wild-type crosses do not. Mutant kem 1 strains are hypersensitive to benomyl, lose chromosomes at a rate 10-20-fold higher than KEM+ strains, and lose viability upon nitrogen starvation. In addition, kem 1/kem 1 diploids are unable to sporulate. Cells containing a kem 1 null allele grow very poorly, have an elongated rod-shape and are defective in spindle pole body duplication and/or separation. The KEM 1 gene, which is expressed as a 5.5-kb mRNA transcript, contains a 4.6-kb open reading frame encoding a 175-kD protein.

Ady3p Links Spindle Pole Body Function to Spore Wall Synthesis in Saccharomyces cerevisiae

Genetics ◽  
2002 ◽  
Vol 160 (4) ◽  
pp. 1439-1450
Author(s):  
Mark E Nickas ◽  
Aaron M Neiman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
De Novo ◽  
Spindle Pole Body ◽  
Leading Edge ◽  
Spindle Pole ◽  
Spore Wall ◽  
Pole Body ◽  
Prospore Membrane ◽  
Sporulation Efficiency ◽  
Spore Walls

Abstract Spore formation in Saccharomyces cerevisiae requires the de novo synthesis of prospore membranes and spore walls. Ady3p has been identified as an interaction partner for Mpc70p/Spo21p, a meiosis-specific component of the outer plaque of the spindle pole body (SPB) that is required for prospore membrane formation, and for Don1p, which forms a ring-like structure at the leading edge of the prospore membrane during meiosis II. ADY3 expression has been shown to be induced in midsporulation. We report here that Ady3p interacts with additional components of the outer and central plaques of the SPB in the two-hybrid assay. Cells that lack ADY3 display a decrease in sporulation efficiency, and most ady3Δ/ady3Δ asci that do form contain fewer than four spores. The sporulation defect in ady3Δ/ady3Δ cells is due to a failure to synthesize spore wall polymers. Ady3p forms ring-like structures around meiosis II spindles that colocalize with those formed by Don1p, and Don1p rings are absent during meiosis II in ady3Δ/ady3Δ cells. In mpc70Δ/mpc70Δ cells, Ady3p remains associated with SPBs during meiosis II. Our results suggest that Ady3p mediates assembly of the Don1p-containing structure at the leading edge of the prospore membrane via interaction with components of the SPB and that this structure is involved in spore wall formation.

Sign in / Sign up

Export Citation Format

Share Document