scholarly journals ADY1, A Novel Gene Required for Prospore Membrane Formation at Selected Spindle Poles inSaccharomyces cerevisiae

2001 ◽  
Vol 12 (9) ◽  
pp. 2646-2659 ◽  
Author(s):  
Changchun Deng ◽  
William S. Saunders
Keyword(s):  
Meiotic Chromosome ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Membrane Formation ◽  
Spindle Poles ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Prospore Membrane ◽  
A Cell ◽  
Body Component

ADY1 is identified in a genetic screen for genes on chromosome VIII of Saccharomyces cerevisiae that are required for sporulation. ADY1 is not required for meiotic recombination or meiotic chromosome segregation, but it is required for the formation of four spores inside an ascus. In the absence of ADY1, prospore formation is restricted to mainly one or two spindle poles per cell. Moreover, the two spores in the dyads of the ady1 mutant are predominantly nonsisters, suggesting that the proficiency to form prospores is not randomly distributed to the four spindle poles in theady1 mutant. Interestingly, the meiosis-specific spindle pole body component Mpc54p, which is known to be required for prospore membrane formation, is localized predominantly to only one or two spindle poles per cell in the ady1 mutant. A partially functional Myc-Pfs1p is localized to the nucleus of mononucleate meiotic cells but not to the spindle pole body or prospore membrane. These results suggest that Pfs1p is specifically required for prospore formation at selected spindle poles, most likely by ensuring the functionality of all four spindle pole bodies of a cell during meiosis II.

scholarly journals Conservative Duplication of Spindle Poles during Meiosis in Saccharomyces cerevisiae

2001 ◽  
Vol 183 (7) ◽  
pp. 2372-2375 ◽  
Author(s):  
Andreas Wesp ◽  
Susanne Prinz ◽  
Gerald R. Fink
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Spore Formation ◽  
Wild Type ◽  
Body Distribution ◽  
Spindle Poles ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Type Strains

ABSTRACT During sporulation in diploid Saccharomyces cerevisiae, spindle pole bodies acquire the so-called meiotic plaque, a prerequisite for spore formation. Mpc70p is a component of the meiotic plaque and is thus essential for spore formation. We show here that MPC70/mpc70 heterozygous strains most often produce two spores instead of four and that these spores are always nonsisters. In wild-type strains, Mpc70p localizes to all four spindle pole bodies, whereas in MPC70/mpc70 strains Mpc70p localizes to only two of the four spindle pole bodies, and these are always nonsisters. Our data can be explained by conservative spindle pole body distribution in which the two newly synthesized meiosis II spindle pole bodies of MPC70/mpc70 strains lack Mpc70p.

S. pombe sporulation-specific coiled-coil protein Spo15p is localized to the spindle pole body and essential for its modification

2000 ◽  
Vol 113 (3) ◽  
pp. 545-554 ◽  
Author(s):  
S. Ikemoto ◽  
T. Nakamura ◽  
M. Kubo ◽  
C. Shimoda
Keyword(s):  
Life Cycle ◽  
Fusion Gene ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Wild Type ◽  
Membrane Formation ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Meiotic Spindles

Spindle pole bodies in the fission yeast Schizosaccharomyces pombe are required during meiosis, not only for spindle formation but also for the assembly of forespore membranes. The spo15 mutant is defective in the formation of forespore membranes, which develop into spore envelopes. The spo15(+)gene encodes a protein with a predicted molecular mass of 223 kDa, containing potential coiled-coil regions. The spo15 gene disruptant was not lethal, but was defective in spore formation. Northern and western analyses indicated that spo15(+) was expressed not only in meiotic cells but also in vegetative cells. When the spo15-GFP fusion gene was expressed by the authentic spo15 promoter during vegetative growth and sporulation, the fusion protein colocalized with Sad1p, which is a component of spindle pole bodies. Meiotic divisions proceeded in spo15delta cells with kinetics similar to those in wild-type cells. In addition, the morphology of the mitotic and meiotic spindles and the nuclear segregation were normal in spo15delta. Intriguingly, transformation of spindle pole bodies from a punctate to a crescent form prior to forespore membrane formation was not observed in spo15delta cells. We conclude that Spo15p is associated with spindle pole bodies throughout the life cycle and plays an indispensable role in the initiation of spore membrane formation.

scholarly journals Ady4p and Spo74p Are Components of the Meiotic Spindle Pole Body That Promote Growth of the Prospore Membrane in Saccharomyces cerevisiae

2003 ◽  
Vol 2 (3) ◽  
pp. 431-445 ◽  
Author(s):  
Mark E. Nickas ◽  
Cindi Schwartz ◽  
Aaron M. Neiman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
De Novo ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Meiotic Spindle ◽  
Membrane Formation ◽  
Auxiliary Component ◽  
Pole Body ◽  
Prospore Membrane ◽  
Organizing Center

ABSTRACT Spore formation in Saccharomyces cerevisiae occurs via the de novo synthesis of the prospore membrane during the second meiotic division. Prospore membrane formation is triggered by assembly of a membrane-organizing center, the meiotic outer plaque (MOP), on the cytoplasmic face of the spindle pole body (SPB) during meiosis. We report here the identification of two new components of the MOP, Ady4p and Spo74p. Ady4p and Spo74p interact with known proteins of the MOP and are localized to the outer plaque of the SPB during meiosis II. MOP assembly and prospore membrane formation are abolished in spo74Δ/spo74Δ cells and occur aberrantly in ady4Δ/ady4Δ cells. Spo74p and the MOP component Mpc70p are mutually dependent for recruitment to SPBs during meiosis. In contrast, both Ady4p and Spo74p are present at SPBs, albeit at reduced levels, in cells that lack the MOP component Mpc54p. Our findings suggest a model for the assembled MOP in which Mpc54p, Mpc70p, and Spo74p make up a core structural unit of the scaffold that initiates synthesis of the prospore membrane, and Ady4p is an auxiliary component that stabilizes the plaque.

Evidence for cell cycle-specific, spindle pole body-mediated, nuclear positioning in the fission yeast Schizosaccharomyces pombe

1997 ◽  
Vol 110 (16) ◽  
pp. 1851-1866 ◽  
Author(s):  
I. Hagan ◽  
M. Yanagida
Keyword(s):  
Cell Cycle ◽  
Fission Yeast ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Nuclear Positioning ◽  
Central Location ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
A Cell ◽  
Multiple Spindle

Specific changes in spatial order occur during cell cycle progression in fission yeast. Growth of the rod-shaped cells is highly regulated and undergoes a cell cycle and size-regulated switch from monopolar to bipolar tip extension. During both phases of growth, the interphase nucleus is maintained in a central location. Following the separation of the genome to the cell tips in mitosis, the two nuclei migrate back towards the cell equator before stopping in two new positions that will become the middle of the two new cells. Here we use simultaneous labeling of microtubules, chromatin and spindle pole bodies in wild-type and cdc mutants, to show that nuclear positioning is achieved by regulation of spindle pole body-mediated nuclear migration. We show that the number and location of nuclear positioning signals is regulated in a cell cycle-specific manner and that spindle pole body-mediated forces are likely to be responsible for maintaining correct nuclear position once the nuclei have reached the appropriate position in the cell. Accentuating the movement of the nuclei back towards the cell equator after mitosis by artificially increasing cell length shows that the spindle pole body leads the nucleus during this migration. When multiple spindle pole bodies are associated with the same or different nuclei they all go to the same point indicating that the different spindle pole bodies are responding to the same positional cue. In a septation-defective mutant cell, which contains four nuclei, the spindle pole bodies on the four different nuclei initially group as two pairs in regions that would become the middle of the new cells, were the cell able to divide. In the subsequent interphase, the nuclei aggregate as a group of four in the centre of the cell. The presence of two or three clusters of spindle pole bodies in larger cells with eight nuclei suggests that the mechanisms specifying the normally central location for multiple nuclei may be unable to operate properly as the cells get larger. Perturbation of microtubules with the microtubule poison thiabendazole prevents the spindle pole body clustering in septation mutants, demonstrating that nuclear positioning requires a functional microtubule cytoskeleton.

Ady3p Links Spindle Pole Body Function to Spore Wall Synthesis in Saccharomyces cerevisiae

Genetics ◽  
2002 ◽  
Vol 160 (4) ◽  
pp. 1439-1450
Author(s):  
Mark E Nickas ◽  
Aaron M Neiman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
De Novo ◽  
Spindle Pole Body ◽  
Leading Edge ◽  
Spindle Pole ◽  
Spore Wall ◽  
Pole Body ◽  
Prospore Membrane ◽  
Sporulation Efficiency ◽  
Spore Walls

Abstract Spore formation in Saccharomyces cerevisiae requires the de novo synthesis of prospore membranes and spore walls. Ady3p has been identified as an interaction partner for Mpc70p/Spo21p, a meiosis-specific component of the outer plaque of the spindle pole body (SPB) that is required for prospore membrane formation, and for Don1p, which forms a ring-like structure at the leading edge of the prospore membrane during meiosis II. ADY3 expression has been shown to be induced in midsporulation. We report here that Ady3p interacts with additional components of the outer and central plaques of the SPB in the two-hybrid assay. Cells that lack ADY3 display a decrease in sporulation efficiency, and most ady3Δ/ady3Δ asci that do form contain fewer than four spores. The sporulation defect in ady3Δ/ady3Δ cells is due to a failure to synthesize spore wall polymers. Ady3p forms ring-like structures around meiosis II spindles that colocalize with those formed by Don1p, and Don1p rings are absent during meiosis II in ady3Δ/ady3Δ cells. In mpc70Δ/mpc70Δ cells, Ady3p remains associated with SPBs during meiosis II. Our results suggest that Ady3p mediates assembly of the Don1p-containing structure at the leading edge of the prospore membrane via interaction with components of the SPB and that this structure is involved in spore wall formation.

scholarly journals Vesicle Docking to the Spindle Pole Body Is Necessary to Recruit the Exocyst During Membrane Formation inSaccharomyces cerevisiae

2010 ◽  
Vol 21 (21) ◽  
pp. 3693-3707 ◽  
Author(s):  
Erin M. Mathieson ◽  
Yasuyuki Suda ◽  
Mark Nickas ◽  
Brian Snydsman ◽  
Trisha N. Davis ◽  
...  
Keyword(s):  
De Novo ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Resonance Energy ◽  
Initiation Site ◽  
Spindle Pole ◽  
Rab Gtpase ◽  
Membrane Formation ◽  
Vesicle Docking ◽  
Pole Body

During meiosis II in Saccharomyces cerevisiae, the cytoplasmic face of the spindle pole body, referred to as the meiosis II outer plaque (MOP), is modified in both composition and structure to become the initiation site for de novo formation of a membrane called the prospore membrane. The MOP serves as a docking complex for precursor vesicles that are targeted to its surface. Using fluorescence resonance energy transfer analysis, the orientation of coiled-coil proteins within the MOP has been determined. The N-termini of two proteins, Mpc54p and Spo21p, were oriented toward the outer surface of the structure. Mutations in the N-terminus of Mpc54p resulted in a unique phenotype: precursor vesicles loosely tethered to the MOP but did not contact its surface. Thus, these mpc54 mutants separate the steps of vesicle association and docking. Using these mpc54 mutants, we determined that recruitment of the Rab GTPase Sec4p, as well as the exocyst components Sec3p and Sec8p, to the precursor vesicles requires vesicle docking to the MOP. This suggests that the MOP promotes membrane formation both by localization of precursor vesicles to a particular site and by recruitment of a second tethering complex, the exocyst, that stimulates downstream events of fusion.

Assembly and dynamics of an anastral:astral spindle: the meiosis II spindle of Drosophila oocytes

1998 ◽  
Vol 111 (17) ◽  
pp. 2487-2495 ◽  
Author(s):  
S.A. Endow ◽  
D.J. Komma
Keyword(s):  
De Novo ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
The Body ◽  
Central Spindle ◽  
Spindle Poles ◽  
Pole Body ◽  
Microtubule Motor ◽  
Gamma Tubulin ◽  
Meiosis I

The meiosis II spindle of Drosophila oocytes is distinctive in structure, consisting of two tandem spindles with anastral distal poles and an aster-associated spindle pole body between the central poles. Assembly of the anastral:astral meiosis II spindle occurs by reorganization of the meiosis I spindle, without breakdown of the meiosis I spindle. The unusual disk- or ring-shaped central spindle pole body forms de novo in the center of the elongated meiosis I spindle, followed by formation of the central spindle poles. gamma-Tubulin transiently localizes to the central spindle pole body, implying that the body acts as a microtubule nucleating center for assembly of the central poles. Localization of gamma-tubulin to the meiosis II spindle is dependent on the microtubule motor protein, Nonclaret disjunctional (Ncd). Absence of Ncd results in loss of gamma-tubulin localization to the spindle and destabilization of microtubules in the central region of the spindle. Assembly of the anastral:astral meiosis II spindle probably involves rapid reassortment of microtubule plus and minus ends in the center of the meiosis I spindle - this can be accounted for by a model that also accounts for the loss of gamma-tubulin localization to the spindle and destabilization of microtubules in the absence of Ncd.

Spindle pole body fusion in the smut fungus Tilletia foetida

1986 ◽  
Vol 64 (6) ◽  
pp. 1221-1223 ◽  
Author(s):  
Blair J. Goates ◽  
James A. Hoffmann
Keyword(s):  
Nuclear Fusion ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Smut Fungus ◽  
Narrow Region ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Tilletia Foetida

Fusion of double-structured, interphase spindle pole bodies (SPBs) occurred before nuclear fusion in heterokaryotic secondary sporidia. The SPBs of two separate nuclei were juxtaposed with their long axes perpendicular to each other. Also, SPBs were observed oriented with their long axes parallel and fused to each other at both ends. Fusion apparently continued toward the midportion of the SPBs. Nuclei were observed joined together in a narrow region. These nuclei appeared to share a single SPB that was located opposite to a protuberance on both nuclei. Following fusion, the SPB apparently returned to an interphase structure.

Sign in / Sign up

Export Citation Format

Share Document