Three-dimensional geometry and growth of a basement-involved fault network developed during multiphase extension, Enderby Terrace, North West Shelf of Australia

2021 ◽  
Author(s):  
Hongdan Deng ◽  
Ken McClay
Keyword(s):  
Three Dimensional ◽  
Sedimentary Basins ◽  
Fault Reactivation ◽  
Late Triassic ◽  
Seismic Reflection Data ◽  
North West ◽  
Reflection Data ◽  
Data Volume ◽  
Vertical Linkages ◽  
Fault Network

Basement fault reactivation, and the growth, interaction, and linkage with new fault segments are fundamentally three-dimensional and critical for understanding the evolution of fault network development in sedimentary basins. This paper analyzes the evolution of a complex, basement-involved extensional fault network on the Enderby Terrace on the eastern margin of the Dampier sub-basin, North West Shelf of Australia. A high-resolution, depth-converted, 3-D seismic reflection data volume is used to show that multiphase, oblique extensional reactivation of basement-involved faults controlled the development of the fault network in the overlying strata. Reactivation of the pre-existing faults initially led to the formation of overlying, en échelon Late Triassic−Middle Jurassic fault segments that, as WNW-directed rifting progressed on the margin, linked by breaching of relay zones to form two intersecting fault systems (F1 and F2−F4). Further reactivation in the latest Jurassic−Early Cretaceous (NNW-SSE extension) produced an additional set of en échelon fault arrays in the cover strata. The final fault network consists of main or principal faults and subordinate or splay faults, together with branch lines that link the various components. Our study shows that breaching of relay ramps and/or vertical linkages produces vertical and horizontal branch lines giving complex final fault geometries. We find that repeated activity of the basement-involved faults tends to form continuous and planar fault architectures that favor displacement transfer between the main constituent segments along strike and with depth.

Three-dimensional geometry and growth of a basement-involved fault network developed during multiphase extension, Enderby Terrace, North West Shelf of Australia

2021 ◽  
Author(s):  
Hongdan Deng ◽  
Ken McClay
Keyword(s):  
Three Dimensional ◽  
Sedimentary Basins ◽  
Fault Reactivation ◽  
Late Triassic ◽  
Seismic Reflection Data ◽  
North West ◽  
Reflection Data ◽  
Data Volume ◽  
Vertical Linkages ◽  
Fault Network

<div>Basement fault reactivation, and the growth, interaction, and linkage with new fault segments are fundamentally three-dimensional and critical for understanding the evolution of fault network development in sedimentary basins. This paper analyses the evolution of a complex, basement-involved extensional fault network on the Enderby Terrace on the eastern margin of the Dampier sub-basin, NW Shelf of Australia. A high-resolution, depth-converted, 3D seismic reflection data volume is used to show that multiphase, oblique extensional reactivation of basement-involved faults controlled the development of the fault network in the overlying strata. Oblique reactivation of the pre-existing faults initially led to the formation of overlying, en échelon Late Triassic – Middle Jurassic fault segments that, as WNW–directed rifting progressed on the margin, linked by breaching of relay ramp to form two intersecting fault systems (F1 and F2-F4). Further reactivation in the Latest Jurassic – Early Cretaceous (NNW–SSE extension) produced an additional set of en échelon fault arrays in the cover strata. The final fault network consists of main or principal faults and subordinate or splay faults, together with branch lines that link the various components. Our study shows that breaching of relay ramps and/or vertical linkages produces vertical and horizontal branch lines giving complex final fault geometries. We find that repeated activity of the basement-involved faults tends to form continuous and planar fault architectures that favor displacement transfer between the main constituent segments along strike and with depth.</div>

A NORTH WEST SHELF TRIASSIC REEF PLAY: RESULTS FROM ODP LEG 122

1989 ◽  
Vol 29 (1) ◽  
pp. 328 ◽  
Author(s):  
P.E. Williamson ◽  
N.F. Exon ◽  
B. ul Haq ◽  
U. von Rad
Keyword(s):  
Seismic Reflection ◽  
Upper Triassic ◽  
Seismic Facies ◽  
Late Triassic ◽  
Seismic Reflection Data ◽  
Reef Complex ◽  
North West ◽  
Exmouth Plateau ◽  
The North ◽  
Reflection Data

Site 764 of the Ocean Drilling Program (ODP), drilled during Leg 122 in the Exmouth Plateau region, cored 200 m of Upper Triassic (Rhaetian) reef complex. This site, on the northern Wombat Plateau (northernmost Exmouth Plateau) represents the first discovery of Triassic reefal material near the Australian North West Shelf. Seismic reflection data through Site 764 show that the reef itself corresponds predominantly to a seismically poorly reflective zone. A number of regional unconformities appear to correspond, however, to traceable seismic horizons which pass with reduced amplitude through the reef, indicating stages of reef growth separated by erosion or non- deposition. Seismic facies around the edges of the reef are consistent with the deposition of wedges of prograding reef- derived detritus.Application of the seismic criteria for reef recognition established at ODP Site 764, to other seismic reflection data on the Wombat Plateau, demonstrates that a major Upper Triassic reef complex fringes the margins of the Wombat Plateau. The Wombat Plateau lies at the western end of the North West Shelf, which was part of the southern margin of a warm Tethys Ocean in the Late Triassic, at a palaeolatitude of 25- 30°S. Upper Triassic reefs are known from southeast Indonesia and Papua New Guinea, and now the Wombat Plateau, and may be common elsewhere along the outer margin of the North West Shelf. Upper Triassic reef complexes, with their associated reservoir, source and seal facies, could represent an exciting new petroleum exploration play for the entire North West Shelf. Facies analysis suggests that they are likely only on the outer shelf and slope. Shallow Triassic reef complexes are clearly identifiable using high resolution seismic reflection data. Seismic reflection data of lower resolution may well reveal the associated detrital carbonate wedges, which are more laterally extensive than the reefal core, deeper in the section.

Plumbing and architecture of a crustal mineralizing system in the Archean Superior Province, Canada

2021 ◽  
Author(s):  
Eric Roots ◽  
Graham Hill ◽  
Ben M. Frieman ◽  
James A. Craven ◽  
Richard S. Smith ◽  
...  
Keyword(s):  
Upper Mantle ◽  
Spatial Association ◽  
Three Dimensional ◽  
3D Models ◽  
Superior Province ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Abitibi Subprovince ◽  
Lower Crustal

<p>The role of melts and magmatic/metamorphic fluids in mineralization processes is well established. However, the role of crustal architecture in defining source and sink zones in the middle to lower crust remains enigmatic. Integration of three dimensional magnetotelluric (MT) modelling and seismic reflection data across the Archean Abitibi greenstone belt of the Superior Province, Canada, reveals a ‘whole-of-crust’ mineralizing system and highlights the controls by crustal architecture on metallogenetic processes. Electrically conductive conduits in an otherwise resistive upper crust are coincident with truncations and offsets of seismic reflections that are mostly interpreted as major brittle-ductile fault zones. The spatial association between these features and low resistivity zones imaged in the 3D models suggest that these zones acted as pathways through which fluids and melts ascended toward the surface. At mid-crustal levels, these ‘conduit’ zones connect to ~50 km long, north-south striking conductors, and are inferred to represent graphite and/or sulphide deposited from cooling fluids. At upper mantle to lower crustal depths, east-west trending conductive zones dominate and display shallow dips. The upper mantle features are broadly coincident with the surface traces of the major deformation zones with which a large proportion of the gold endowment is associated. We suggest that these deep conductors represent interconnected graphitic zones perhaps augmented by sulphides that are relicts from metamorphic fluid and melt emplacement associated primarily with the later stages of regional deformation.  Thus, from the combined MT and seismic data, we develop a crustal-scale architectural model that is consistent with existing geological and deformational models, providing constraints on the sources for and signatures of fluid and magma emplacement that resulted in widespread metallogenesis in the Abitibi Subprovince.</p>

scholarly journals Seismic reflection data reveal the 3D structure of the newly discovered Exmouth Dyke Swarm, offshore NW Australia

2020 ◽  
Author(s):  
Craig Magee ◽  
Christopher A.-L. Jackson
Keyword(s):  
Seismic Reflection ◽  
Surface Deformation ◽  
3D Structure ◽  
Sedimentary Basins ◽  
Dyke Swarm ◽  
Normal Faults ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Dyke Swarms ◽  
Nw Australia

Abstract. Dyke swarms are common on Earth and other planetary bodies, comprising arrays of dykes that can extend for 10's to 1000's of kilometres. The vast extent of such dyke swarms, and their rapid emplacement, means they can significantly influence a variety of planetary processes, including continental break-up, crustal extension, resource accumulation, and volcanism. Determining the mechanisms driving dyke swarm emplacement is thus critical to a range of Earth Science disciplines. However, unravelling dyke swarm emplacement mechanics relies on constraining their 3D structure, which is extremely difficult given we typically cannot access their subsurface geometry at a sufficiently high enough resolution. Here we use high-quality seismic reflection data to identify and examine the 3D geometry of the newly discovered Exmouth Dyke Swarm, and associated structures (i.e. dyke-induced normal faults and pit craters), in unprecedented detail. The latest Jurassic dyke swarm is located on the Gascoyne Margin offshore NW Australia and contains numerous dykes that are > 170 km long, potentially > 500 km long. The mapped dykes are distributed radially across a 39° arc centred on the Cuvier Margin; we infer this focal area marks the source of the dyke swarm, which was likely a mantle plume. We demonstrate seismic reflection data provides unique opportunities to map and quantify dyke swarms in 3D in sedimentary basins, which can allow us to: (i) recognise dyke swarms across continental margins worldwide and incorporate them into models of basin evolution and fluid flow; (ii) test previous models and hypotheses concerning the 3D structure of dyke swarms; (iii) reveal how dyke-induced normal faults and pit craters relate to dyking; and (iv) unravel how dyking translates into surface deformation.

Crustal structure and surface zonation of the Canadian Appalachians: implications of deep seismic reflection data

1989 ◽  
Vol 26 (2) ◽  
pp. 305-321 ◽  
Author(s):  
François Marillier ◽  
Charlotte E. Keen ◽  
Glen S. Stockmal ◽  
Garry Quinlan ◽  
Harold Williams ◽  
...  
Keyword(s):  
Seismic Reflection ◽  
Three Dimensional ◽  
Surface Expression ◽  
Seismic Profiles ◽  
Crust And Upper Mantle ◽  
Seismic Reflection Data ◽  
Central Block ◽  
Reflection Data ◽  
Lower Crustal ◽  
Canadian Appalachians

In 1986, 1181 km of marine seismic reflection data was collected to 18–20 s of two-way traveltime in the Gulf of St. Lawrence area. The seismic profiles sample all major surface tectono-stratigraphic zones of the Canadian Appalachians. They complement the 1984 deep reflection survey northeast of Newfoundland. Together, the seismic profiles reveal the regional three-dimensional geometry of the orogen.Three lower crustal blocks are distinguished on the seismic data. They are referred to as the Grenville, Central, and Avalon blocks, from west to east. The Grenville block is wedge shaped in section, and its subsurface edge follows the form of the Appalachian structural front. The Grenville block abuts the Central block at mid-crustal to mantle depths. The Avalon block meets the Central block at a steep junction that penetrates the entire crust.Consistent differences in the seismic character of the Moho help identify boundaries of the deep crustal blocks. The Moho signature varies from uniform over extended distances to irregular with abrupt depth changes. In places the Moho is offset by steep reflections that cut the lower crust and upper mantle. In other places, the change in Moho elevation is gradual, with lower crustal reflections following its form. In all three blocks the crust is generally highly reflective, with no distinction between a transparent upper crust and reflective lower crust.In general, Carboniferous and Mesozoic basins crossed by the seismic profiles overlie thinner crust. However, a deep Moho is found at some places beneath the Carboniferous Magdalen Basin.The Grenville block belongs to the Grenville Craton; the Humber Zone is thrust over its dipping southwestern edge. The Dunnage Zone is allochthonous above the opposing Grenville and Central blocks. The Gander Zone may be the surface expression of the Central block or may be allochthonous itself. There is a spatial analogy between the Avalon block and the Avalon Zone. Our profile across the Meguma Zone is too short to seismically distinguish this zone from the Avalon Zone.

scholarly journals Entrainment and abrasion of megaclasts during submarine landsliding and their impact on flow behaviour

2018 ◽  
Vol 477 (1) ◽  
pp. 223-240 ◽  
Author(s):  
D. M. Hodgson ◽  
H. L. Brooks ◽  
A. Ortiz-Karpf ◽  
Y. Spychala ◽  
D. R. Lee ◽  
...  
Keyword(s):  
Seismic Reflection ◽  
Three Dimensional ◽  
Submarine Landslides ◽  
Seismic Reflection Data ◽  
Karoo Basin ◽  
Reflection Data ◽  
Seabed Topography ◽  
Flow Evolution ◽  
Basal Shear ◽  
Process Product

AbstractMany mass transport complexes (MTCs) contain up to kilometre-scale (mega)clasts encased in a debritic matrix. Although many megaclasts are sourced from the headwall areas, the irregular basal shear surfaces of many MTCs indicate that megaclast entrainment during the passage of flows into the deeper basin is also common. However, the mechanisms responsible for the entrainment of large blocks of substrate, and their influence on the longitudinal behaviour of the associated flows, have not been widely considered. We present examples of megaclasts from exhumed MTCs (the Neuquén Basin, Argentina and the Karoo Basin, South Africa) and MTCs imaged in three-dimensional seismic reflection data (Magdalena Fan, offshore Colombia and Santos Basin, offshore Brazil) to investigate these process–product interactions. We show that highly sheared basal surfaces are well developed in distal locations, sometimes extending beyond their associated deposit. This points to deformation and weakening of the substrate ahead of the flow, suggesting that preconditioning of the substrate by distributed shear ahead of, and to the side of, a mass flow could result in the entrainment of large fragments. An improved understanding of the interactions between flow evolution, seabed topography, and the entrainment and abrasion of megaclasts will help to refine estimates of run-out distances, and therefore the geohazard potential of submarine landslides.

Applications of digital methodology to the NATMAP Shield Margin Project

1999 ◽  
Vol 36 (2) ◽  
pp. 161-173 ◽  
Author(s):  
H John Broome ◽  
David Viljoen
Keyword(s):  
Three Dimensional ◽  
Geological Mapping ◽  
Digital Data ◽  
Data Sets ◽  
Digital Products ◽  
Seismic Reflection Data ◽  
Cd Rom ◽  
Reflection Data ◽  
Mapping Process ◽  
Rectangular Area

The NATMAP Shield Margin Project, which began in 1991, straddles the Manitoba-Saskatchewan border and studied a rectangular area with east-west and north-south extents of approximately 250 and 150 km, respectively. Among the principal objectives of the NATMAP program were a compilation of a digital geoscience database for the study area and development of digital methodology to build this database and its utilization to aid in reaching the geological goals of the project. It was anticipated that these initiatives would encourage integrated interpretation of data, improve the effectiveness of the geological mapping process, and accelerate publication of results. One of the keys to effectively applying digital methods to a geological mapping project is maintaining data in digital form throughout the project, from the field through to publication. Transcription errors are eliminated and the production of both preliminary and final maps and digital products is accelerated. Access to digital data also facilitates application of digital tools for analysis and visualization. Integrated image products generated from geophysical and geological data sets were used throughout the project and assisted in development of geological models and their visualization. Three-dimensional visualization methods were used to combine NATMAP surface and subsurface mapping with Lithoprobe interpretations of seismic reflection data. The digital database was used to prepare a digital archive of the project which will be published in CD-ROM after completion of the project.

The Sask Craton and Hearne Province margin: seismic reflection studies in the western Trans-Hudson Orogen

2005 ◽  
Vol 42 (4) ◽  
pp. 403-419 ◽  
Author(s):  
Z Hajnal ◽  
J Lewry ◽  
D White ◽  
K Ashton ◽  
R Clowes ◽  
...  
Keyword(s):  
Seismic Reflection ◽  
Three Dimensional ◽  
Three Dimensional Model ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Regional Tectonic ◽  
Detachment Zone ◽  
Tectonic Development ◽  
Seismic Images ◽  
Basal Detachment

A three-dimensional model of the regional crustal architecture of the western Trans-Hudson Orogen, based on the interpretation of 590 km of deep-sounding seismic reflection data and a comparable length of existing seismic reflection information, is presented. The seismic images identify the regional geometry of the basal detachment zone (Pelican thrust) that separates juvenile allochthonous terranes from the underlying Archean microcontinent (Sask craton). The Sask Craton is inferred to have a minimum spatial extent of over 100 000 km2 with an associated crustal root that extends for 200 km along strike. During terminal collision, complete convergence of the Rae–Hearne and Superior continental blocks was precluded by the presence of the Sask Craton, resulting in the preservation of anomalous amounts of oceanic and associated sedimentary juvenile material. Along regional tectonic strike, consistency of crustal structure across the Rae–Hearne margin – Reindeer zone boundary is established. Several phases of tectonic development, including multistage subduction and continent–continent collision, are inferred for the western margin of the orogen. A bright, shallow (2–3.5 s two-way traveltime) band of reflectivity (Wollaston Lake reflector) imaged over ~150 000 km2 area is inferred to be a large post-orogenic mafic intrusion. A highly reflective, well-defined and structurally disturbed Moho discontinuity is mapped throughout the western Trans-Hudson Orogen. The present-day crustal architecture of the western Trans-Hudson Orogen is described in terms of the tectonic evolution within the region.

Rift processes in the Westralian Superbasin, North West Shelf, Australia: insights from 2D deep reflection seismic interpretation and potential fields modelling

2015 ◽  
Vol 55 (2) ◽  
pp. 400 ◽  
Author(s):  
Catherine Belgarde ◽  
Gianreto Manatschal ◽  
Nick Kusznir ◽  
Sonia Scarselli ◽  
Michal Ruder
Keyword(s):  
Seismic Reflection ◽  
Potential Fields ◽  
Moho Depth ◽  
Late Permian ◽  
Forward Modelling ◽  
Seismic Reflection Data ◽  
North West ◽  
Reflection Seismic ◽  
The North ◽  
Reflection Data

Acquisition of long-offset (8–10 km), long-record length (12–18 sec), 2D reflection seismic and ship-borne potential fields data (WestraliaSpan by Ion/GXT and New Dawn by PGS) on the North West Shelf of Australia provide the opportunity to study rift processes in the context of modern models for rifted margins (Manatschal, 2004). Basement and Moho surfaces were interpreted on seismic reflection data. Refraction models from Geoscience Australia constrain Moho depth and initial densities for gravity modelling through standard velocity-density transformation. 2D joint inversion of seismic reflection and gravity data for Moho depth and basement density constrain depth to basement on seismic. 2D gravity and magnetic intensity forward modelling of key seismic lines constrain basement thickness, type and density. Late Permian and Jurassic-Early Cretaceous rift zones were mapped on seismic reflection data and constrained further by inversion and forward modelling of potential fields data. The Westralian Superbasin formed as a marginal basin in Eastern Gondwana during the Late Permian rifting of the Sibumasu terrane. Crustal necking was localised along mechanically-weak Proterozoic suture belts or Early Paleozoic sedimentary basins (such as Paterson and Canning). Mechanically-strong cratons (such as Pilbara and Kimberley) remained intact, resulting in necking and hyper-extension at their edges. Late Permian hyper-extended areas (such as Exmouth Plateau) behaved as mechanically-strong blocks during the Jurassic to Early Cretaceous continental break-up. Late Permian necking zones were reactivated as failed-rift basins and localised the deposition of the Jurassic oil-prone source rocks that have generated much of the oil discovered on the North West Shelf.

Sign in / Sign up

Export Citation Format

Share Document