Modern Approaches in the Synthesis of Noble Metal Porphyrins for Their Practical Application (Review)

2019 ◽  
Vol 64 (14) ◽  
pp. 1775-1802 ◽  
Author(s):  
E. Yu. Tyulyaeva
ChemInform ◽  
2010 ◽  
Vol 27 (20) ◽  
pp. no-no
Author(s):  
J. W. BUCHLER ◽  
C. DREHER ◽  
F. M. KUENZEL

2018 ◽  
Vol 1 (4) ◽  
pp. 483-530 ◽  
Author(s):  
Muhammad Arif Khan ◽  
Hongbin Zhao ◽  
Wenwen Zou ◽  
Zhe Chen ◽  
Wenjuan Cao ◽  
...  

Abstract The study of hydrogen evolution reaction and oxygen evolution reaction electrocatalysts for water electrolysis is a developing field in which noble metal-based materials are commonly used. However, the associated high cost and low abundance of noble metals limit their practical application. Non-noble metal catalysts, aside from being inexpensive, highly abundant and environmental friendly, can possess high electrical conductivity, good structural tunability and comparable electrocatalytic performances to state-of-the-art noble metals, particularly in alkaline media, making them desirable candidates to reduce or replace noble metals as promising electrocatalysts for water electrolysis. This article will review and provide an overview of the fundamental knowledge related to water electrolysis with a focus on the development and progress of non-noble metal-based electrocatalysts in alkaline, polymer exchange membrane and solid oxide electrolysis. A critical analysis of the various catalysts currently available is also provided with discussions on current challenges and future perspectives. In addition, to facilitate future research and development, several possible research directions to overcome these challenges are provided in this article. Graphical Abstract


Author(s):  
F. A. Heckman ◽  
E. Redman ◽  
J.E. Connolly

In our initial publication on this subject1) we reported results demonstrating that contrast is the most important factor in producing the high image quality required for reliable image analysis. We also listed the factors which enhance contrast in order of the experimentally determined magnitude of their effect. The two most powerful factors affecting image contrast attainable with sheet film are beam intensity and KV. At that time we had only qualitative evidence for the ranking of enhancing factors. Later we carried out the densitometric measurements which led to the results outlined below.Meaningful evaluations of the cause-effect relationships among the considerable number of variables in preparing EM negatives depend on doing things in a systematic way, varying only one parameter at a time. Unless otherwise noted, we adhered to the following procedure evolved during our comprehensive study:Philips EM-300; 30μ objective aperature; magnification 7000- 12000X, exposure time 1 second, anti-contamination device operating.


Author(s):  
Sooho Kim ◽  
M. J. D’Aniello

Automotive catalysts generally lose-agtivity during vehicle operation due to several well-known deactivation mechanisms. To gain a more fundamental understanding of catalyst deactivation, the microscopic details of fresh and vehicle-aged commercial pelleted automotive exhaust catalysts containing Pt, Pd and Rh were studied by employing Analytical Electron Microscopy (AEM). Two different vehicle-aged samples containing similar poison levels but having different catalytic activities (denoted better and poorer) were selected for this study.The general microstructure of the supports and the noble metal particles of the two catalysts looks similar; the noble metal particles were generally found to be spherical and often faceted. However, the average noble metal particle size on the poorer catalyst (21 nm) was larger than that on the better catalyst (16 nm). These sizes represent a significant increase over that found on the fresh catalyst (8 nm). The activity of these catalysts decreases as the observed particle size increases.


Author(s):  
Yaru Li ◽  
Yu-Quan Zhu ◽  
Weili Xin ◽  
Song Hong ◽  
Xiaoying Zhao ◽  
...  

Rationally designing low-content and high-efficiency noble metal nanodots offers opportunities to enhance electrocatalytic performances for water splitting. However, the preparation of highly dispersed nanodots electrocatalysts remains a challenge. Herein, we...


2000 ◽  
Vol 5 (6) ◽  
pp. 1-7
Author(s):  
Christopher R. Brigham ◽  
James B. Talmage ◽  
Leon H. Ensalada

Abstract The AMA Guides to the Evaluation of Permanent Impairment (AMA Guides), Fifth Edition, is available and includes numerous changes that will affect both evaluators who and systems that use the AMA Guides. The Fifth Edition is nearly twice the size of its predecessor (613 pages vs 339 pages) and contains three additional chapters (the musculoskeletal system now is split into three chapters and the cardiovascular system into two). Table 1 shows how chapters in the Fifth Edition were reorganized from the Fourth Edition. In addition, each of the chapters is presented in a consistent format, as shown in Table 2. This article and subsequent issues of The Guides Newsletter will examine these changes, and the present discussion focuses on major revisions, particularly those in the first two chapters. (See Table 3 for a summary of the revisions to the musculoskeletal and pain chapters.) Chapter 1, Philosophy, Purpose, and Appropriate Use of the AMA Guides, emphasizes objective assessment necessitating a medical evaluation. Most impairment percentages in the Fifth Edition are unchanged from the Fourth because the majority of ratings currently are accepted, there is limited scientific data to support changes, and ratings should not be changed arbitrarily. Chapter 2, Practical Application of the AMA Guides, describes how to use the AMA Guides for consistent and reliable acquisition, analysis, communication, and utilization of medical information through a single set of standards.


Sign in / Sign up

Export Citation Format

Share Document