Does the DSA reconstruction kernel affect hemodynamic predictions in intracranial aneurysms? An analysis of geometry and blood flow variations

2017 ◽  
Vol 10 (3) ◽  
pp. 290-296 ◽  
Author(s):  
P Berg ◽  
S Saalfeld ◽  
S Voß ◽  
T Redel ◽  
B Preim ◽  
...  
Keyword(s):  
Blood Flow ◽  
Intracranial Aneurysms ◽  
Three Dimensional ◽  
Patient Specific ◽  
Parent Artery ◽  
Imaging Data ◽  
Specific Flow ◽  
Aneurysm Neck ◽  
Velocity Magnitude ◽  
Reconstruction Kernel

BackgroundComputational fluid dynamics (CFD) blood flow predictions in intracranial aneurysms promise great potential to reveal patient-specific flow structures. Since the workflow from image acquisition to the final result includes various processing steps, quantifications of the individual introduced potential error sources are required.MethodsThree-dimensional (3D) reconstruction of the acquired imaging data as input to 3D model generation was evaluated. Six different reconstruction modes for 3D digital subtraction angiography (DSA) acquisitions were applied to eight patient-specific aneurysms. Segmentations were extracted to compare the 3D luminal surfaces. Time-dependent CFD simulations were carried out in all 48 configurations to assess the velocity and wall shear stress (WSS) variability due to the choice of reconstruction kernel.ResultsAll kernels yielded good segmentation agreement in the parent artery; deviations of the luminal surface were present at the aneurysm neck (up to 34.18%) and in distal or perforating arteries. Observations included pseudostenoses as well as noisy surfaces, depending on the selected reconstruction kernel. Consequently, the hemodynamic predictions show a mean SD of 11.09% for the aneurysm neck inflow rate, 5.07% for the centerline-based velocity magnitude, and 17.83%/9.53% for the mean/max aneurysmal WSS, respectively. In particular, vessel sections distal to the aneurysms yielded stronger variations of the CFD values.ConclusionsThe choice of reconstruction kernel for DSA data influences the segmentation result, especially for small arteries. Therefore, if precise morphology measurements or blood flow descriptions are desired, a specific reconstruction setting is required. Furthermore, research groups should be encouraged to denominate the kernel types used in future hemodynamic studies.

scholarly journals Development of an Intravascular Doppler Optical Coherence Tomography Imaging Technique for Neurovascular Applications

2021 ◽  
Author(s):  
Barry Vuong
Keyword(s):  
Blood Flow ◽  
Optical Coherence Tomography ◽  
Intracranial Aneurysm ◽  
Intracranial Aneurysms ◽  
Fluid Dynamic ◽  
Patient Specific ◽  
Optical Coherence ◽  
Specific Flow ◽  
Arterial Lumen ◽  
Risk Of Rupture

The rupture of an intracranial aneurysm can cause spontaneous subarachnoid hemorrhage and result in sudden death. A large portion of intracranial aneurysms occurs near the center of the head, at the skull base, which poses significant technical challenge to neurosurgeons due to limited accessibility. The utilization of angiography is prominent during the treatment of intracranial aneurysms. However, malapposition of stent or incomplete packing of the intracranial aneurysm can be difficult to assess with angiography, and could lead to severe postoperative complications. As a result, angiography may not be sufficient in determining the risk of rupture as the compensatory mechanisms are known to occur at the microstructural level due to the local hemodynamics in the arterial lumen, as well as in evaluating the intraoperative treatment. In this work, we describe a method for assessing intracranial aneurysm through the evaluation of blood flow within the lumen and morphological structures of the arterial wall with optical coherence tomography (OCT). Sterile intravascular fiber-optic catheters can be introduced in the artery to detect blood flow. Prior to this work, limited investigations of catheter based Doppler OCT (DOCT) were reported. A novel signal processing technique was developed to further reduce the effect of Doppler noise within a catheter based DOCT system. This technique consisted of splitting the interferogram of an OCT signal prior to estimating the Doppler shift. This split spectrum DOCT (ssDOCT) method was evaluated through flow models and porcine models, as well as through the correlation between ssDOCT algorithm and computational fluid dynamic (CFD) models. It was observed that ssDOCT provided improved Doppler artefact suppression over the conventional DOCT technique. ssDOCT also provided the ability to estimate lower velocities within the DOCT image to measure the hemodynamic patterns around stent struts in both the internal carotid and patient specific flow phantoms. An OCT imaging study was also conducted consisting of surgically resected human intracranial aneurysms. Further enhancement of the detection of these key morphological structures was demonstrated by an optical-attenuation imaging variant of OCT. The presented techniques could provide further insights to the cause of intracranial aneurysm rupture and vascular healing mechanisms.

scholarly journals Development of an Intravascular Doppler Optical Coherence Tomography Imaging Technique for Neurovascular Applications

2021 ◽  
Author(s):  
Barry Vuong
Keyword(s):  
Blood Flow ◽  
Optical Coherence Tomography ◽  
Intracranial Aneurysm ◽  
Intracranial Aneurysms ◽  
Fluid Dynamic ◽  
Patient Specific ◽  
Optical Coherence ◽  
Specific Flow ◽  
Arterial Lumen ◽  
Risk Of Rupture

The rupture of an intracranial aneurysm can cause spontaneous subarachnoid hemorrhage and result in sudden death. A large portion of intracranial aneurysms occurs near the center of the head, at the skull base, which poses significant technical challenge to neurosurgeons due to limited accessibility. The utilization of angiography is prominent during the treatment of intracranial aneurysms. However, malapposition of stent or incomplete packing of the intracranial aneurysm can be difficult to assess with angiography, and could lead to severe postoperative complications. As a result, angiography may not be sufficient in determining the risk of rupture as the compensatory mechanisms are known to occur at the microstructural level due to the local hemodynamics in the arterial lumen, as well as in evaluating the intraoperative treatment. In this work, we describe a method for assessing intracranial aneurysm through the evaluation of blood flow within the lumen and morphological structures of the arterial wall with optical coherence tomography (OCT). Sterile intravascular fiber-optic catheters can be introduced in the artery to detect blood flow. Prior to this work, limited investigations of catheter based Doppler OCT (DOCT) were reported. A novel signal processing technique was developed to further reduce the effect of Doppler noise within a catheter based DOCT system. This technique consisted of splitting the interferogram of an OCT signal prior to estimating the Doppler shift. This split spectrum DOCT (ssDOCT) method was evaluated through flow models and porcine models, as well as through the correlation between ssDOCT algorithm and computational fluid dynamic (CFD) models. It was observed that ssDOCT provided improved Doppler artefact suppression over the conventional DOCT technique. ssDOCT also provided the ability to estimate lower velocities within the DOCT image to measure the hemodynamic patterns around stent struts in both the internal carotid and patient specific flow phantoms. An OCT imaging study was also conducted consisting of surgically resected human intracranial aneurysms. Further enhancement of the detection of these key morphological structures was demonstrated by an optical-attenuation imaging variant of OCT. The presented techniques could provide further insights to the cause of intracranial aneurysm rupture and vascular healing mechanisms.

scholarly journals Development of an Intravascular Doppler Optical Coherence Tomography Imaging Technique for Neurovascular Applications

2021 ◽  
Author(s):  
Barry Vuong
Keyword(s):  
Blood Flow ◽  
Optical Coherence Tomography ◽  
Intracranial Aneurysm ◽  
Intracranial Aneurysms ◽  
Fluid Dynamic ◽  
Patient Specific ◽  
Optical Coherence ◽  
Specific Flow ◽  
Arterial Lumen ◽  
Risk Of Rupture

The rupture of an intracranial aneurysm can cause spontaneous subarachnoid hemorrhage and result in sudden death. A large portion of intracranial aneurysms occurs near the center of the head, at the skull base, which poses significant technical challenge to neurosurgeons due to limited accessibility. The utilization of angiography is prominent during the treatment of intracranial aneurysms. However, malapposition of stent or incomplete packing of the intracranial aneurysm can be difficult to assess with angiography, and could lead to severe postoperative complications. As a result, angiography may not be sufficient in determining the risk of rupture as the compensatory mechanisms are known to occur at the microstructural level due to the local hemodynamics in the arterial lumen, as well as in evaluating the intraoperative treatment. In this work, we describe a method for assessing intracranial aneurysm through the evaluation of blood flow within the lumen and morphological structures of the arterial wall with optical coherence tomography (OCT). Sterile intravascular fiber-optic catheters can be introduced in the artery to detect blood flow. Prior to this work, limited investigations of catheter based Doppler OCT (DOCT) were reported. A novel signal processing technique was developed to further reduce the effect of Doppler noise within a catheter based DOCT system. This technique consisted of splitting the interferogram of an OCT signal prior to estimating the Doppler shift. This split spectrum DOCT (ssDOCT) method was evaluated through flow models and porcine models, as well as through the correlation between ssDOCT algorithm and computational fluid dynamic (CFD) models. It was observed that ssDOCT provided improved Doppler artefact suppression over the conventional DOCT technique. ssDOCT also provided the ability to estimate lower velocities within the DOCT image to measure the hemodynamic patterns around stent struts in both the internal carotid and patient specific flow phantoms. An OCT imaging study was also conducted consisting of surgically resected human intracranial aneurysms. Further enhancement of the detection of these key morphological structures was demonstrated by an optical-attenuation imaging variant of OCT. The presented techniques could provide further insights to the cause of intracranial aneurysm rupture and vascular healing mechanisms.

scholarly journals Development of an Intravascular Doppler Optical Coherence Tomography Imaging Technique for Neurovascular Applications

2021 ◽  
Author(s):  
Barry Vuong
Keyword(s):  
Blood Flow ◽  
Optical Coherence Tomography ◽  
Intracranial Aneurysm ◽  
Intracranial Aneurysms ◽  
Fluid Dynamic ◽  
Patient Specific ◽  
Optical Coherence ◽  
Specific Flow ◽  
Arterial Lumen ◽  
Risk Of Rupture

The rupture of an intracranial aneurysm can cause spontaneous subarachnoid hemorrhage and result in sudden death. A large portion of intracranial aneurysms occurs near the center of the head, at the skull base, which poses significant technical challenge to neurosurgeons due to limited accessibility. The utilization of angiography is prominent during the treatment of intracranial aneurysms. However, malapposition of stent or incomplete packing of the intracranial aneurysm can be difficult to assess with angiography, and could lead to severe postoperative complications. As a result, angiography may not be sufficient in determining the risk of rupture as the compensatory mechanisms are known to occur at the microstructural level due to the local hemodynamics in the arterial lumen, as well as in evaluating the intraoperative treatment. In this work, we describe a method for assessing intracranial aneurysm through the evaluation of blood flow within the lumen and morphological structures of the arterial wall with optical coherence tomography (OCT). Sterile intravascular fiber-optic catheters can be introduced in the artery to detect blood flow. Prior to this work, limited investigations of catheter based Doppler OCT (DOCT) were reported. A novel signal processing technique was developed to further reduce the effect of Doppler noise within a catheter based DOCT system. This technique consisted of splitting the interferogram of an OCT signal prior to estimating the Doppler shift. This split spectrum DOCT (ssDOCT) method was evaluated through flow models and porcine models, as well as through the correlation between ssDOCT algorithm and computational fluid dynamic (CFD) models. It was observed that ssDOCT provided improved Doppler artefact suppression over the conventional DOCT technique. ssDOCT also provided the ability to estimate lower velocities within the DOCT image to measure the hemodynamic patterns around stent struts in both the internal carotid and patient specific flow phantoms. An OCT imaging study was also conducted consisting of surgically resected human intracranial aneurysms. Further enhancement of the detection of these key morphological structures was demonstrated by an optical-attenuation imaging variant of OCT. The presented techniques could provide further insights to the cause of intracranial aneurysm rupture and vascular healing mechanisms.

Limitations of three-dimensional reconstructed computerized tomography angiography after clip placement for intracranial aneurysms

2005 ◽  
Vol 103 (4) ◽  
pp. 656-661 ◽  
Author(s):  
Yoshiko Sagara ◽  
Hiro Kiyosue ◽  
Yuzo Hori ◽  
Michifumi Sainoo ◽  
Hirofumi Nagatomi ◽  
...  
Keyword(s):  
Ct Angiography ◽  
Computerized Tomography ◽  
Intracranial Aneurysms ◽  
Three Dimensional ◽  
Parent Artery ◽  
3D Ct ◽  
Metal Artifacts ◽  
Content Type ◽  
Aneurysm Neck ◽  
Fine Print

Object. The authors compared the usefulness of three-dimensional (3D) reconstructed computerized tomography (CT) angiography with 3D digital subtraction (DS) angiography in assessing intracranial aneurysms after clip placement. A retrospective review of clinical cases was performed. Methods. Between May 2001 and May 2003, 17 patients with a total of 20 intracranial aneurysms underwent 3D CT and 3D DS angiography following clip placement. The authors assessed the presence or absence of residual aneurysm necks and stenoocclusive changes in the parent artery and the neighboring artery. The efficacy of CT angiographic visualization was also evaluated. In 12 of the 20 aneurysms, both 3D modalities similarly demonstrated the residual aneurysm neck and stenoocclusive changes in the parent artery and neighboring artery. Three-dimensional CT angiography failed to demonstrate three of the aneurysms, and the studies were not considered suitable for evaluation because of the presence of metallic artifacts. In the remaining five studies, the 3D CT angiograms did not effectively demonstrate the neighboring and parent arteries. The detectability of residual aneurysm necks was correlated with the clip material and with the number of clips applied. Conclusions. Three-dimensional DS angiography is still necessary in cases involving multiple clips or with cobalt alloy clips because the clips appear as metal artifacts on 3D CT angiography.

Peripheral intracranial aneurysms: management challenges in 60 consecutive cases

2009 ◽  
Vol 110 (1) ◽  
pp. 7-13 ◽  
Author(s):  
Eric S. Nussbaum ◽  
Michael T. Madison ◽  
James K. Goddard ◽  
Jeffrey P. Lassig ◽  
Leslie A. Nussbaum
Keyword(s):  
Intracranial Aneurysms ◽  
Artery Occlusion ◽  
Neurological Deficits ◽  
Parent Artery ◽  
Branch Points ◽  
Aneurysm Neck ◽  
Vertebrobasilar System ◽  
Parent Artery Occlusion ◽  
Major Branch ◽  
Proximal Occlusion

Object The authors report the management and outcomes of 55 patients with 60 intracranial aneurysms arising distal to the major branch points of the circle of Willis and vertebrobasilar system. Methods Between July 1997 and December 2006, the authors' neurovascular service treated 2021 intracranial aneurysms in 1850 patients. The database was reviewed retrospectively to identify peripherally located intracranial aneurysms. Aneurysms that were mycotic and aneurysms that were associated with either an arteriovenous malformation or an atrial myxoma were excluded from review. Results The authors encountered 60 peripheral intracranial aneurysms in 55 patients. There were 42 small, 7 large, and 11 giant lesions. Forty-one (68%) were unruptured, and 19 (32%) had bled. Fifty-three aneurysms were treated surgically by using direct clip reconstruction in 26, trapping or proximal occlusion with distal revascularization in 21, excision with end-to-end anastomosis in 3, and circumferential wrap/clip reconstruction in 3. Coils were used to treat 6 aneurysms, and 1 was treated by endovascular parent artery occlusion. Overall, 49 patients had good outcomes, 4 were left with new neurological deficits, and 2 died. Conclusions Peripherally situated intracranial aneurysms are rare lesions that present unique management challenges. Despite the fact that in the authors' experience these lesions were rarely treatable with simple clipping of the aneurysm neck or endovascular coil occlusion, preservation of the parent artery was possible in most cases, and the majority of patients had a good outcome.

scholarly journals Late Thromboembolic Events after Treatment of Intracranial Aneurysms with Guglielmi Detachable Coils

Stroke ◽  
2001 ◽  
Vol 32 (suppl_1) ◽  
pp. 356-357
Author(s):  
Colin P Derdeyn ◽  
Christopher J Moran ◽  
DeWitte T Cross ◽  
Michael R Chicoine ◽  
Ralph G Dacey
Keyword(s):  
Endovascular Treatment ◽  
Intracranial Aneurysms ◽  
Artery Aneurysm ◽  
Additional Patient ◽  
Superior Cerebellar Artery ◽  
Parent Artery ◽  
Imaging Data ◽  
Guglielmi Detachable Coils ◽  
Kaplan Meier ◽  
Detachable Coils

P98 Purpose: Thrombo-embolic complications associated with the endovascular treatment of intracranial aneurysms with Guglielmi Detachable Coils (GDC) generally occur at the time of the procedure or soon after. The purpose of this report is to determine the frequency of late thrombo-embolic events after GDC. Methods: The records of 189 patients who underwent GDC repair of one or more intracranial aneurysms at our institution were reviewed. The occurence of an ischemic event referrable to a coiled aneurysm was determined by clinical, angiographic, and imaging data. Events occuring within 2 days of the endovascular procedure were considered peri-procedural. Kaplan-Meier analysis of ischemic events over time was performed. Results: Two patients suffered documented thrombo-embolic events. One patient presented 5 weeks after coiling with a transient ischemic attack. Angiography demonstrated thrombus on the surface of the coils at the neck of a large ophthalmic artery aneurysm. The second patient presented with a posterior circulation stroke 4 weeks after coiling of a large superior cerebellar artery aneurysm. Angiography showed no significant proximal disease, with thrombus beginning at the neck of the treated aneurysm and extending out both P1 segments. No intra-procedural problems during the initial coiling had occured with either patient. There was no evidence for protrusion of coils into the parent artery in either patient. Both patients had been receiving daily aspirin (325 mg). One additional patient reporting symptoms suggesting possible ischemics event was evaluated and diagnosed as having atypical migraines. The frequency of a clinical thromboembolic event during the first year after coiling (excluding procedural complications) was 1.1%. Conclusions: Thrombo-embolic events may occur as late as 5 weeks after endovascular treatment of aneurysms with GDC.

Embolization of Non-Ruptured Aneurysms

1999 ◽  
Vol 5 (1_suppl) ◽  
pp. 93-96 ◽  
Author(s):  
C.F. Dowd ◽  
C.C. Phatouros ◽  
A.M. Malek ◽  
T.E. Lempert ◽  
P.M. Meyers ◽  
...  
Keyword(s):  
Intracranial Aneurysms ◽  
Three Dimensional ◽  
Giant Aneurysm ◽  
Epidemiological Data ◽  
Anterior Circulation ◽  
Unruptured Aneurysms ◽  
Aneurysm Neck ◽  
Technical Developments ◽  
History Of ◽  
Anterior Circulation Aneurysms

Options for treatment of intracranial aneurysms have expanded with the advent of the Guglielmi Detachable Cod (GDC) eight years ago. We have reviewed 435 cases of intracranial aneurysms treated at UCSF by endovascular means using the GDC system. Of these, 55% represent anterior circulation aneurysms, and 45% are located in the posterior circulation. Additionally, 55% of the aneurysms presented with subarachnoid hemorrhage (SAH) and 45% were unruptured. Factors which hindered optimal coiling include the following: wide aneurysm neck in relation to the overall aneurysm size, mural thrombus, giant aneurysm, arteries originating from the aneurysm sac, and middle cerebral location. After initial experience was gained, we tended to avoid these aneurysms especially in the non-ruptured group. This may be especially important in light of new epidemiological data suggesting that the natural history of unruptured aneurysms is significantly lower than previously thought. New technical developments which may reduce the risk of treating unruptured aneurysms include the two-dimensional coil, the three-dimensional coil, the balloon-assist technique for wide-necked aneurysms, and combined stent-coil procedures.

scholarly journals Main Clinical Use of Additive Manufacturing (Three-Dimensional Printing) in Finland Restricted to the Head and Neck Area in 2016–2017

2019 ◽  
Vol 109 (2) ◽  
pp. 166-173 ◽  
Author(s):  
A.B.V. Pettersson ◽  
M. Salmi ◽  
P. Vallittu ◽  
W. Serlo ◽  
J. Tuomi ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Patient Specific ◽  
Future Research ◽  
Imaging Data ◽  
University Hospitals ◽  
Three Dimensional Printing ◽  
Dimensional Printing ◽  
Head Area

Background and Aims: Additive manufacturing or three-dimensional printing is a novel production methodology for producing patient-specific models, medical aids, tools, and implants. However, the clinical impact of this technology is unknown. In this study, we sought to characterize the clinical adoption of medical additive manufacturing in Finland in 2016–2017. We focused on non-dental usage at university hospitals. Materials and Methods: A questionnaire containing five questions was sent by email to all operative, radiologic, and oncologic departments of all university hospitals in Finland. Respondents who reported extensive use of medical additive manufacturing were contacted with additional, personalized questions. Results: Of the 115 questionnaires sent, 58 received answers. Of the responders, 41% identified as non-users, including all general/gastrointestinal (GI) and vascular surgeons, urologists, and gynecologists; 23% identified as experimenters or previous users; and 36% identified as heavy users. Usage was concentrated around the head area by various specialties (neurosurgical, craniomaxillofacial, ear, nose and throat diseases (ENT), plastic surgery). Applications included repair of cranial vault defects and malformations, surgical oncology, trauma, and cleft palate reconstruction. Some routine usage was also reported in orthopedics. In addition to these patient-specific uses, we identified several off-the-shelf medical components that were produced by additive manufacturing, while some important patient-specific components were produced by traditional methodologies such as milling. Conclusion: During 2016–2017, medical additive manufacturing in Finland was routinely used at university hospitals for several applications in the head area. Outside of this area, usage was much less common. Future research should include all patient-specific products created by a computer-aided design/manufacture workflow from imaging data, instead of concentrating on the production methodology.

Sign in / Sign up

Export Citation Format

Share Document