Determination of copper, iron, nickel, and sulphur by X-ray fluorescence in lichens from the Mackenzie Valley, Northwest Territories, and the Sudbury District, Ontario

1976 ◽  
Vol 54 (14) ◽  
pp. 1591-1603 ◽  
Author(s):  
F. D. Tomassini ◽  
K. J. Puckett ◽  
E. Nieboer ◽  
D. H. S. Richardson ◽  
B. Grace

X-ray fluorescence was adapted to the analysis of 22 terricolous lichen species from 14 sites in the Mackenzie Valley, Northwest Territories, and 7 species from the Sudbury District of Northern Ontario. X-ray fluorescence (XRF) proved to be faster and exhibited better sensitivity and reproducibility than conventional analytical techniques; also, the samples were not destroyed in the analysis. Procedural details of the XRF method are given. The levels of copper, iron, nickel, and sulphur in Arctic lichens were similar to those found in lichens growing on the periphery of the Sudbury pollution zone but very much lower than in specimens nearer the nickel smelter. A linear relationship between concentration and the reciprocal of the distance from the Copper Cliff smelter was confirmed for the occurrence of these four elements in samples collected along a 60-mi NNW transect.

1961 ◽  
Vol 10 (13) ◽  
pp. 1361-1367 ◽  
Author(s):  
Shizo HIRANO ◽  
Hiroo SASUGA ◽  
Kiyoshi TABUCHI

1960 ◽  
Vol 4 ◽  
pp. 457-473
Author(s):  
G. R. Blank ◽  
H. A. Heller

AbstractA method is presented for the X-ray spectrometric determination of copper, tin, and uranium in a bronze heat-treating material. The method is based on the irradiation of an acid solution of the sample, to which indium and zinc have been added as internal standards. Quantitative determinations of copper and tin (each in the 40 to 60% range) are calculated from the ratios of the CuKα/ZnKα and SnKα/In Kα intensities. Uranium concentration (in the 1 to 10% range) is calculated from the ratio of the ULα/ In Kα intensities, A correction for the interference of the second-order In Kβ1,3 doublet with the first-order ULα peak is described. The over-all limits of error for single determinations at the 95% confidence level are ±0,58% copper, ±0,56% tin, and ±0,31% uranium.


Sign in / Sign up

Export Citation Format

Share Document