DEVELOPMENT OF MOTION CAPTURE SYSTEM USING DUAL VIDEO CAMERAS FOR THE GAIT DESIGN OF A BIPED ROBOT

2011 ◽  
Vol 08 (02) ◽  
pp. 275-299 ◽  
Author(s):  
JUNG-YUP KIM ◽  
YOUNG-SEOG KIM
Keyword(s):  
Motion Capture ◽  
Human Walking ◽  
Human Gait ◽  
Motion Capture System ◽  
System Calibration ◽  
Walking Gait ◽  
Video Cameras ◽  
Optical Motion ◽  
Optical Motion Capture ◽  
Motion Capture Systems

This paper, describes the development of a motion capture system with novel features for biped robots. In general, motion capture is effectively utilized in the field of computer animation. In the field of humanoid robotics, the number of studies attempting to design human-like gaits by using expensive optical motion capture systems is increasing. The optical motion capture systems used in these studies have involved a large number of cameras because such systems use small-sized ball markers; hence the position accuracy of the markers and the system calibration are very significant. However, since the human walking gait is a simple periodic motion rather than a complex motion, we have developed a specialized motion capture system for this study using dual video cameras and large band-type markers without high-level system calibration in order to capture the human walking gait. In addition to its lower complexity, the proposed capture method requires only a low-cost system and has high space efficiency. An image processing algorithm is also proposed for deriving the human gait data. Finally, we verify the reliability and accuracy of our system by comparing a zero moment point (ZMP) trajectory calculated by the motion captured data with a ZMP trajectory measured by foot force sensors.

scholarly journals Use of computer innovative technologies in improving the dartsmen training

2020 ◽  
Vol 26 ◽  
pp. 00061
Author(s):  
Elina Makarova ◽  
Vladislav Dubatovkin ◽  
Nataliya Berezinskaya ◽  
Lyudmila Barkhatova ◽  
Elena Oleynik
Keyword(s):  
Motion Capture ◽  
Body Parts ◽  
Visual Material ◽  
Video Cameras ◽  
Dart Throwing ◽  
Optical Motion ◽  
Optical Motion Capture ◽  
Effective Use ◽  
Near Future ◽  
Motion Capture Systems

The research is focused on studying the possibility of effective use of the dart grip system, the work of the athlete’s hand, to prepare the dartsman for competitions using the MOSAR complex. The experiment uses optical motion capture systems, a set of video cameras, led parameter sensors, and devices that allow to record the movement of body parts and a dart. This method of training and controlling dart throwing can serve as educational and visual material for training future athletes. The use of such motion capture systems in the near future may become one of the main aspects of training, both beginners and professionals, in many sports.

Non-rigid alignment pipeline applied to human gait signals acquired with optical motion capture systems and inertial sensors

2020 ◽  
Vol 98 ◽  
pp. 109429 ◽  
Author(s):  
Rubén Soussé ◽  
Jorge Verdú ◽  
Ricardo Jauregui ◽  
Ventura Ferrer-Roca ◽  
Simone Balocco
Keyword(s):  
Motion Capture ◽  
Inertial Sensors ◽  
Human Gait ◽  
Optical Motion ◽  
Optical Motion Capture ◽  
Motion Capture Systems

scholarly journals Concurrent assessment of gait kinematics using marker-based and markerless motion capture

2020 ◽  
Author(s):  
Robert Kanko ◽  
Elise Laende ◽  
Elysia Davis ◽  
W. Scott Selbie ◽  
Kevin J. Deluzio
Keyword(s):  
Motion Capture ◽  
Lower Limb ◽  
Video Data ◽  
Motion Capture System ◽  
Kinematic Data ◽  
Markerless Motion Capture ◽  
Common Marker ◽  
Optical Motion ◽  
Optical Motion Capture ◽  
Motion Capture Systems

AbstractKinematic analysis is a useful and widespread tool used in research and clinical biomechanics for the estimation of human pose and the quantification of human movement. Common marker-based optical motion capture systems are expensive, time intensive, and require highly trained operators to obtain kinematic data. Markerless motion capture systems offer an alternative method for the measurement of kinematic data with several practical benefits. This work compared the kinematics of human gait measured using a deep learning algorithm-based markerless motion capture system to those of a common marker-based motion capture system. Thirty healthy adult participants walked on a treadmill while data were simultaneously recorded using eight video cameras (markerless) and seven infrared optical motion capture cameras (marker-based). Video data were processed using markerless motion capture software, marker-based data were processed using marker-based capture software, and both sets of data were compared. The average root mean square distance (RMSD) between corresponding joints was less than 3 cm for all joints except the hip, which was 4.1 cm. Lower limb segment angles indicated pose estimates from both systems were very similar, with RMSD of less than 6° for all segment angles except those that represent rotations about the long axis of the segment. Lower limb joint angles captured similar patterns for flexion/extension at all joints, ab/adduction at the knee and hip, and toe-in/toe-out at the ankle. These findings demonstrate markerless motion capture can measure similar 3D kinematics to those from marker-based systems.

Tracking of Markers for 2D and 3D Gait Analysis Using Home Video Cameras

2013 ◽  
Vol 4 (3) ◽  
pp. 36-52 ◽  
Author(s):  
Sandro Mihradi ◽  
Ferryanto ◽  
Tatacipta Dirgantara ◽  
Andi I. Mahyuddin
Keyword(s):  
Gait Analysis ◽  
Motion Capture ◽  
Motion Capture System ◽  
Distance Method ◽  
Home Video ◽  
Video Cameras ◽  
Optical Motion ◽  
Spatio Temporal ◽  
Optical Motion Capture ◽  
2D And 3D

This work presents the development of an affordable optical motion-capture system which uses home video cameras for 2D and 3D gait analysis. The 2D gait analyzer system consists of one camcorder and one PC while the 3D gait analyzer system uses two camcorders, a flash and two PCs. Both systems make use of 25 fps camcorder, LED markers and technical computing software to track motions of markers attached to human body during walking. In the experiment for 3D gait analyzer system, the two cameras are synchronized by using flash. The recorded videos for both systems are extracted into frames and then converted into binary images, and bridge morphological operation is applied for unconnected pixel to facilitate marker detection process. Least distance method is then employed to track the markers motions, and 3D Direct Linear Transformation is used to reconstruct 3D markers positions. The correlation between length in pixel and in the real world resulted from calibration process is used to reconstruct 2D markers positions. To evaluate the reliability of the 2D and 3D optical motion-capture system developed in the present work, spatio-temporal and kinematics parameters calculated from the obtained markers positions are qualitatively compared with the ones from literature, and the results show good compatibility.

A gait analysis using optical motion capture system with large scale pressure sensor

2017 ◽  
Vol 2017 (0) ◽  
pp. A-36
Author(s):  
Tatsuro Ishizuka ◽  
Tokio Maeda ◽  
Sakura Yamaji ◽  
Yuji Ohgi ◽  
Humiaki Shibayama ◽  
...  
Keyword(s):  
Gait Analysis ◽  
Motion Capture ◽  
Pressure Sensor ◽  
Large Scale ◽  
Motion Capture System ◽  
Optical Motion ◽  
Optical Motion Capture

scholarly journals The Reliability and Validity of a Clinical Assessment Tool to Measure Scapular Motion in All Three Anatomical Planes

2020 ◽  
Author(s):  
Oliver A Silverson ◽  
Nicole G Cascia ◽  
Carolyn M Hettrich ◽  
Nicholas R Heebner ◽  
Tim L Uhl
Keyword(s):  
Motion Capture ◽  
Reliability And Validity ◽  
Motion Capture System ◽  
Rater Reliability ◽  
Optical Motion ◽  
Arm Elevation ◽  
Clinical Measurements ◽  
Optical Motion Capture ◽  
Anatomical Plane ◽  
Scapular Motion

Abstract Context: A single clinical assessment device that objectively measures scapular motion in each anatomical plane is not currently available. The development of a novel electric goniometer affords the ability to quantify scapular motion in all three anatomical planes. Objective: Investigate the reliability and validity of an electric goniometer to measure scapular motion in each anatomical plane during arm elevation. Design: Cross-sectional. Setting: Laboratory setting. Patients or Other Participants: Sixty participants (29 females, 31 males) were recruited from the general population. Intervention(s): An electric goniometer was used to record clinical measurements of scapular position at rest and total arc of motion (excursion) during active arm elevation in two testing sessions separated by several days. Measurements were recorded independently by two examiners. In one session, scapular motion was recorded simultaneously with a 14-camera three-dimensional optical motion capture system. Main Outcome Measures: Reliability analysis included examination of clinical measurements for scapular position at rest and excursion during each condition. Both the intra-rater reliability between testing sessions and the inter-rater reliability recorded within the same session were assessed using Intraclass Correlation Coefficients (ICC2,3). The criterion-validity was examined by comparing the mean excursion values of each condition recorded by the electric goniometer to the 3D optical motion capture system. Validity was assessed by evaluating the average difference and root mean square error (RMSE). Results: The between session intra-rater reliability was moderate to good (ICC2,3: 0.628–0.874). The within session inter-rater reliability was moderate to excellent (ICC2,3: 0.545–0.912). The average difference between the electric goniometer and 3D optical motion capture system ranged from −7° to 4° and the RMSE was between 7–10°. Conclusions: The reliability of scapular measurements is best when a standard operating procedure is used. The electric goniometer provides an accurate measurement of scapular excursions in all three anatomical planes during arm elevation.

Sign in / Sign up

Export Citation Format

Share Document