Enhancing the Nonlinear Optical Properties of Lithium Tetraborate Glass Using Rare Earth Elements and Silver Nanoparticles

NANO ◽  
2020 ◽  
Vol 15 (05) ◽  
pp. 2050064
Author(s):  
M. A. Vallejo ◽  
S. Romero-Servin ◽  
Moisés I. Casillas Alvarez ◽  
Janet A. Elias Angel ◽  
C. Gomez-Solis ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Optical Properties ◽  
Nonlinear Optical ◽  
Emission Spectra ◽  
Refraction Index ◽  
Lithium Tetraborate ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
The Matrix ◽  
Index Value

In recent years, nonlinear optics field is in constant growth, particularly on the characterization and study of optical properties of glass compounds. In this sense, the plasmonic effect caused by silver nanoparticles (SNP) on the nonlinear optical (NLO) properties of different materials was studied. Furthermore, we report the experimental absorption spectra, the emission spectra, Z-scan measurements in both closed and open apertures and scanning transmission electron microscopy (STEM) to show the morphology of the matrices and the nucleation of SNP. Moreover, some NLO parameters were calculated, such as the NL refraction index and NL coefficient absorption of lithium tetraborate (Li2B4O7) glass activated with rare earths (Dy3+ and Yb3+), as well as study of the effect of different concentrations of SNP. From the results obtained, it has been ascertained that the plasmon resonance caused by the presence of SNP enhances the NL refraction index value, as well as most of its linear optical properties in the matrix of Li2B4O7.

Atomic-scale structural and compositional analyses of Ruddlesden-Popper planar faults in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics

2009 ◽  
Vol 24 (8) ◽  
pp. 2596-2604 ◽  
Author(s):  
Sašo Šturm ◽  
Makoto Shiojiri ◽  
Miran Čeh
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Atomic Scale ◽  
Transmission Electron ◽  
Initial Stage ◽  
Final Microstructure ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

The microstructure in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics is strongly affected by the formation of Ruddlesden-Popper fault–rich (RP fault) lamellae, which are coherently intergrown with the matrix of the perovskite grains. We studied the structure and chemistry of RP faults by applying quantitative high-resolution transmission electron microscopy and high-angle annular dark-field scanning transmission electron microscopy analyses. We showed that the Sr2+ and Ca2+ dopant ions form RP faults during the initial stage of sintering. The final microstructure showed preferentially grown RP fault lamellae embedded in the central part of the anisotropic perovskite grains. In contrast, the dopant Ba2+ ions preferably substituted for Sr2+ in the SrTiO3 matrix by forming a BaxSr1−xTiO3 solid solution. The surplus of Sr2+ ions was compensated structurally in the later stages of sintering by the formation of SrO-rich RP faults. The resulting microstructure showed RP fault lamellae located at the surface of equiaxed BaxSr1-xTiO3 perovskite grains.

scholarly journals Exploring the Capability of HAADF-STEM Techniques to Characterize Graphene Distribution in Nanocomposites by Simulations

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
N. Baladés ◽  
D. L. Sales ◽  
M. Herrera ◽  
A. M. Raya ◽  
J. C. Hernández-Garrido ◽  
...  
Keyword(s):  
Electron Tomography ◽  
Carbon Matrix ◽  
Reconstruction Algorithm ◽  
Dark Field ◽  
Graphene Layers ◽  
Transmission Electron ◽  
Dispersion Degree ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

This paper explores the capability of scanning transmission electron microscopy (STEM) techniques in determining the dispersion degree of graphene layers within the carbon matrix by using simulated high-angle annular dark-field (HAADF) images. Results ensure that unmarked graphene layers are only detectable if their orientation is parallel to the microscope beam. Additionally, gold-marked graphene layers allow evaluating the dispersion degree in structural composites. Moreover, electron tomography has been demonstrated to provide truthfully 3D distribution of the graphene sheets inside the matrix when an appropriate reconstruction algorithm and 2D projections including channelling effect are used.

scholarly journals High-Resolution Microstructure Characterization of Additively Manufactured X5CrNiCuNb17-4 Maraging Steel during Ex and in Situ Thermal Treatment

2021 ◽  
Author(s):  
Mihaela Albu ◽  
Bernd Panzirsch ◽  
Hartmuth Schröttner ◽  
Stefan Mitsche ◽  
Klaus Reichmann ◽  
...  
Keyword(s):  
Maraging Steel ◽  
Elevated Temperatures ◽  
Scanning Transmission Electron Microscope ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
The Matrix ◽  
Powder Particles ◽  
In Situ Heating ◽  
Heating Up

Powder and SLM additively manufactured parts of X5CrNiCuNb17-4 maraging steel were systematically investigated by electron microscopy to understand the relationship between the properties of the powder grains and the microstructure of the printed parts. We prove that satellites, irregularities and superficial oxidation of powder particles can be transformed into an advantage through the formation of nanoscale (AlMnSiTiCr)-oxides in the matrix during the printing process. The nano-oxides showed extensive stability in terms of size, spherical morphology, chemical composition and crystallographic disorder upon in situ heating up to 950°C in the scanning transmission electron microscope. Their presence thus indicates a potential for oxide-dispersive strengthening of this steel, which may be beneficial for creep resistance at elevated temperatures. The nucleation of copper clusters and their evolution into nanoparticles as well as the precipitation of Ni and Cr particles upon in situ heating have as well been systematically documented.

Sign in / Sign up

Export Citation Format

Share Document