TUNABLE BAND STRUCTURES OF 2D MULTI-ATOM ARCHIMEDEAN-LIKE PHONONIC CRYSTALS

2012 ◽  
Vol 01 (02) ◽  
pp. 1250016 ◽  
Author(s):  
Y. L. XU ◽  
C. Q. CHEN ◽  
X. G. TIAN
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Phononic Crystal ◽  
Phononic Crystals ◽  
Band Gaps ◽  
Two Dimensional ◽  
Primitive Cell ◽  
The Finite Element Method ◽  
Band Structures ◽  
Solid System

Two dimensional multi-atom Archimedean-like phononic crystals (MAPCs) can be obtained by adding "atoms" at suitable positions in primitive cells of traditional simple lattices. Band structures of solid-solid and solid-air MAPCs are computed by the finite element method in conjunction with the Bloch theory. For the solid-solid system, our results show that the MAPCs can be suitably designed to split and shift band gaps of the corresponding traditional simple phononic crystal (i.e., with only one scatterer inside a primitive cell). For the solid-air system, the MAPCs have more and wider band gaps than the corresponding traditional simple phononic crystal. Numerical calculations for both solid-solid and solid-air MAPCs show that the band gap of traditional simple phononic crystal can be tuned by appropriately adding "atoms" into its primitive cell.

Tunable Band Gaps of Acoustic Waves in Two-Dimensional Phononic Crystals With Reticular Band Structures

2009 ◽  
Author(s):  
Zi-Gui Huang ◽  
Yunn-Lin Hwang ◽  
Pei-Yu Wang ◽  
Yen-Chieh Mao
Keyword(s):  
Acoustic Waves ◽  
Composite Structures ◽  
Phononic Crystals ◽  
Band Gaps ◽  
Sound Insulation ◽  
Two Dimensional ◽  
The Finite Element Method ◽  
Elastic Band ◽  
Band Structures ◽  
Elastic Band Gaps

The excellent applications and researches of so-called photonic crystals raise the exciting researches of phononic crystals. By the analogy between photon and phonon, repetitive composite structures that are made up of different elastic materials can also prevent elastic waves of some certain frequencies from passing by, i.e., the frequency band gap features also exist in acoustic waves. In this paper, we present the results of the tunable band gaps of acoustic waves in two-dimensional phononic crystals with reticular band structures using the finite element method. Band gaps variations of the bulk modes due to different thickness and angles of reticular band structures are calculated and discussed. The results show that the total elastic band gaps for mixed polarization modes can be enlarged or reduced by adjusting the orientation of the reticular band structures. The phenomena of band gaps of elastic or acoustic waves can potentially be utilized for vibration-free, high-precision mechanical systems, and sound insulation.

Wave bandgap formation and its evolution in two-dimensional phononic crystals composed of rubber matrix with periodic steel quarter-cylinders

2018 ◽  
Vol 32 (04) ◽  
pp. 1850037 ◽  
Author(s):  
Peng Li ◽  
Guan Wang ◽  
Dong Luo ◽  
Xiaoshan Cao
Keyword(s):  
Finite Element Method ◽  
Phononic Crystal ◽  
Phononic Crystals ◽  
Rubber Matrix ◽  
Two Dimensional ◽  
The Finite Element Method ◽  
Defect States ◽  
Low Frequencies ◽  
High Frequencies ◽  
Inner Region

The band structure of a two-dimensional phononic crystal, which is composed of four homogenous steel quarter-cylinders immersed in rubber matrix, is investigated and compared with the traditional steel/rubber crystal by the finite element method (FEM). It is revealed that the frequency can then be tuned by changing the distance between adjacent quarter-cylinders. When the distance is relatively small, the integrality of scatterers makes the inner region inside them almost motionless, so that they can be viewed as a whole at high-frequencies. In the case of relatively larger distance, the interaction between each quarter-cylinder and rubber will introduce some new bandgaps at relatively low-frequencies. Lastly, the point defect states induced by the four quarter-cylinders are revealed. These results will be helpful in fabricating devices, such as vibration insulators and acoustic/elastic filters, whose band frequencies can be manipulated artificially.

A simplified numerical and analytical study for assessing the seismic response of a gravity concrete lock

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Neander Berto Mendes ◽  
Lineu José Pedroso ◽  
Paulo Marcelo Vieira Ribeiro
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Analytical Study ◽  
Two Dimensional ◽  
The Finite Element Method ◽  
Fluid Structure ◽  
Analytical Formulation ◽  
Acoustic Cavity ◽  
Water Chamber ◽  
Structure Problem

ABSTRACT: This work presents the dynamic response of a lock subjected to the horizontal S0E component of the El Centro earthquake for empty and completely filled water chamber cases, by coupled fluid-structure analysis. Initially, the lock was studied by approximation, considering it similar to the case of a double piston coupled to a two-dimensional acoustic cavity (tank), representing a simplified analytical model of the fluid-structure problem. This analytical formulation can be compared with numerical results, in order to qualify the responses of the ultimate problem to be investigated. In all the analyses performed, modeling and numerical simulations were done using the finite element method (FEM), supported by the commercial software ANSYS.

Implementation of p and h-p Versions of the Finite Element Method

1992 ◽  
Author(s):  
Ye-Chen Lai ◽  
Timothy C. S. Liang ◽  
Zhenxue Jia
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Elastic Analysis ◽  
Two Dimensional ◽  
The Finite Element Method ◽  
Shape Functions ◽  
Linear Elastic ◽  
Finite Element Software ◽  
Analysis Process ◽  
Adaptive Analysis

Abstract Based on hierarchic shape functions and an effective convergence procedure, the p-version and h-p adaptive analysis capabilities were incorporated into a finite element software system, called COSMOS/M. The range of the polynomial orders can be varied from 1 to 10 for two dimensional linear elastic analysis. In the h-p adaptive analysis process, a refined mesh are first achieved via adaptive h-refinement. The p-refinement is then added on to the h-version designed mesh by uniformly increasing the degree of the polynomials. Some numerical results computed by COSMOS/M are presented to illustrate the performance of these p and h-p analysis capabilities.

Sign in / Sign up

Export Citation Format

Share Document