Growth and Characterization of p-InGaN/i-InGaN/n-GaN Double Heterojunction Solar Cell on Patterned Sapphire Substrates

2019 ◽  
Vol 35 (6) ◽  
pp. 47-51 ◽  
Author(s):  
Mu-Tao Chu ◽  
Wen-Yih Liao ◽  
Ming-Hsien Wu ◽  
Ray-Hua Horng ◽  
Tsung-Yen Tsai ◽  
...  
2011 ◽  
Vol 32 (7) ◽  
pp. 922-924 ◽  
Author(s):  
Mu-Tao Chu ◽  
Wen-Yih Liao ◽  
Ray-Hua Horng ◽  
Tsung-Yen Tsai ◽  
Tsai-Bau Wu ◽  
...  

2011 ◽  
Author(s):  
Y. S. Kwak ◽  
D. S. Lee ◽  
K. H. Kim ◽  
W. H. Kim ◽  
S. W. Moon ◽  
...  

2019 ◽  
Vol 509 ◽  
pp. 40-43 ◽  
Author(s):  
Suresh Sundaram ◽  
Xin Li ◽  
Saiful Alam ◽  
Yacine Halfaya ◽  
Gilles Patriarche ◽  
...  

2011 ◽  
Vol 258 (1) ◽  
pp. 2-6 ◽  
Author(s):  
Yu-Sheng Lin ◽  
Wen-Ching Hsu ◽  
Kuo-Cheng Huang ◽  
J. Andrew Yeh

2005 ◽  
Vol 864 ◽  
Author(s):  
Chang-Soo Kim ◽  
Ji-Hyun Moon ◽  
Sang-Jun Lee ◽  
Sam-Kyu Noh ◽  
Je Won Kim ◽  
...  

AbstractThe structural properties of GaN epitaxial layers grown on patterned sapphire substrates by MOCVD have been investigated using HRXRD(high-resolution X-ray diffraction), GIXRD(grazing incidence X-ray diffraction) and PL(photoluminescence). For X-ray characterizations rocking curves for GaN (10·5), (00·2), (11·4) and (11·0) reflections for which incidence angles of X-rays are 32.0°, 17.3°, 11.0° and 0.34°, respectively, were measured. For (10·5), (00·2) and (11·4) reflections FWHMs of the rocking curves for a patterned substrate were broader than those for a unpatterned substrate, for (11·0) reflection, however, FWHM for a patterned substrate was much narrower than that for a unpatterned substrate. The normalized FWHM for all reflections decreases as the incidence angle of X-ray decreases. The results indicate that the crystalline quality in the surface region of the epilayer on a patterned substrate was especially improved because the penetration depth of X-ray depends on the incidence angle. The intensity of PL peak of the epilayer for a patterned substrate increased compared to that for a unpatterned substrate, and the increase in PL intensity is attributed to the reduction in dislocation density at the surface region revealed the by X-ray results.


Sign in / Sign up

Export Citation Format

Share Document