Crystal-structure analysis of four mineral samples of anhydrite, CaSO4, using synchrotron high-resolution powder X-ray diffraction data

2011 ◽  
Vol 26 (4) ◽  
pp. 326-330 ◽  
Author(s):  
Sytle M. Antao
Keyword(s):  
Crystal Structure ◽  
High Resolution ◽  
Unit Cell Volume ◽  
Crystal Structure Analysis ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
Rietveld Refinements ◽  
X Ray ◽  
Cell Parameters

The crystal structures of four samples of anhydrite, CaSO4, were obtained by Rietveld refinements using synchrotron high-resolution powder X-ray diffraction (HRPXRD) data and space group Amma. As an example, for one sample of anhydrite from Hants County, Nova Scotia, the unit-cell parameters are a = 7.00032(2), b = 6.99234(1), c = 6.24097(1) Å, and V = 305.487(1) Å3 with a > b. The eight-coordinated Ca atom has an average <Ca-O> distance of 2.4667(4) Å. The tetrahedral SO4 group has two independent S-O distances of 1.484(1) to O1 and 1.478(1) Å to O2 and an average <S-O> distance of 1.4810(5) Å. The three independent O-S-O angles [108.99(8) × 1, 110.38(3) × 4, 106.34(9)° × 1; average <O-S-O> [6] = 109.47(2)°] and S-O distances indicate that the geometry of the SO4 group is quite distorted in anhydrite. The four anhydrite samples have structural trends where the a, b, and c unit-cell parameters increase linearly with increasing unit-cell volume, V, and their average <Ca-O> and <S-O> distances are nearly constant. The grand mean <Ca-O> = 2.4660(2) Å, and grand mean <S-O> = 1.4848(3) Å, the latter is longer than 1.480(1) Å in celestite, SrSO4, as expected.

scholarly journals Structural Variations across Wolframite Solid Solutions, (Fe,Mn)WO4

Minerals ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 42
Author(s):  
Darren A. Umbsaar ◽  
Sytle M. Antao
Keyword(s):  
Crystal Structure ◽  
Solid Solutions ◽  
Unit Cell Volume ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Structural Variations ◽  
Unit Cell Parameters ◽  
Rietveld Refinements ◽  
X Ray ◽  
Cell Parameters

The crystal structure of four samples from natural wolframite solid solutions, (Fe,Mn)WO4, was obtained with synchrotron high-resolution powder X-ray diffraction (HRPXRD) data, Rietveld refinements, space group P2/c, and Z = 2. Wolframite solid solutions extend from ferberite (FeWO4) to hübnerite (MnWO4). The W and (Mn,Fe) cations are in six-fold coordination. This study shows that the unit-cell parameters, a, b, c, and β angle, vary linearly with the unit-cell volume, V, across the wolframite series. The average <Mn,Fe–O> distance increases linearly because of larger Mn2+ (0.83 Å) replacing smaller Fe2+ (0.78 Å) cations, whereas the average <W–O> distance increases slightly because of the higher effective charge of the smaller Fe2+ cation. The distortions of the two types of polyhedra across the series are discussed.

scholarly journals Crystal Structure Refinements of Four Monazite Samples from Different Localities

Minerals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1028 ◽  
Author(s):  
M. Mashrur Zaman ◽  
Sytle M. Antao
Keyword(s):  
Crystal Structure ◽  
Electron Probe ◽  
Unit Cell Volume ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Large Unit Cell ◽  
A Site

This study investigates the crystal chemistry of monazite (APO4, where A = Lanthanides = Ln, as well as Y, Th, U, Ca, and Pb) based on four samples from different localities using single-crystal X-ray diffraction and electron-probe microanalysis. The crystal structure of all four samples are well refined, as indicated by their refinement statistics. Relatively large unit-cell parameters (a = 6.7640(5), b = 6.9850(4), c = 6.4500(3) Å, β = 103.584(2)°, and V = 296.22(3) Å3) are obtained for a detrital monazite-Ce from Cox’s Bazar, Bangladesh. Sm-rich monazite from Gunnison County, Colorado, USA, has smaller unit-cell parameters (a = 6.7010(4), b = 6.9080(4), c = 6.4300(4) Å, β = 103.817(3)°, and V = 289.04(3) Å3). The a, b, and c unit-cell parameters vary linearly with the unit-cell volume, V. The change in the a parameter is large (0.2 Å) and is related to the type of cations occupying the A site. The average <A-O> distances vary linearly with V, whereas the average <P-O> distances are nearly constant because the PO4 group is a rigid tetrahedron.

The crystal structure of tin sulphate, SnSO4, and comparison with isostructural SrSO4, PbSO4, and BaSO4

2012 ◽  
Vol 27 (3) ◽  
pp. 179-183 ◽  
Author(s):  
Sytle M. Antao
Keyword(s):  
Crystal Structure ◽  
High Resolution ◽  
Rietveld Refinement ◽  
Structural Parameters ◽  
Lone Pair ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters

The crystal structure of tin (II) sulphate, SnSO4, was obtained by Rietveld refinement using synchrotron high-resolution powder X-ray diffraction (HRPXRD) data. The structure was refined in space group Pbnm. The unit-cell parameters for SnSO4 are a = 7.12322(1), b = 8.81041(1), c = 5.32809(1) Å, and V = 334.383(1) Å3. The average 〈Sn–O〉 [12] distance is 2.9391(4) Å. However, the Sn2+cation has a pyramidal [3]-coordination to O atoms and the average 〈Sn–O〉 [3] = 2.271(1) Å. If Sn is considered as [12]-coordinated, SnSO4 has a structure similar to barite, BaSO4, and its structural parameters are intermediate between those of BaSO4 and PbSO4. The tetrahedral SO4 group has an average 〈S–O〉 [4] = 1.472(1) Å in SnSO4. Comparing SnSO4 with the isostructural SrSO4, PbSO4, and BaSO4, several well-defined trends are observed. The radii, rM, of the M2+(=Sr, Pb, Sn, and Ba) cations and average 〈S–O〉 distances vary linearly with V because of the effective size of the M2+cation. Based on the trend for the isostructural sulphates, the average 〈Sn–O〉 [12] distance is slightly longer than expected because of the lone pair of electrons on the Sn2+cation.

The structures of marialite (Me6) and meionite (Me93) in space groups P42/n and I4/m, and the absence of phase transitions in the scapolite series

2011 ◽  
Vol 26 (2) ◽  
pp. 119-125 ◽  
Author(s):  
Sytle M. Antao ◽  
Ishmael Hassan
Keyword(s):  
Phase Transitions ◽  
High Resolution ◽  
Crystal Structures ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Space Groups ◽  
Cell Parameters ◽  
The Mean

The crystal structures of marialite (Me6) from Badakhshan, Afghanistan and meionite (Me93) from Mt. Vesuvius, Italy were obtained using synchrotron high-resolution powder X-ray diffraction (HRPXRD) data and Rietveld structure refinements. Their structures were refined in space groups I4/m and P42/n, and similar results were obtained. The Me6 sample has a formula Ca0.24Na3.37K0.24[Al3.16Si8.84O24]Cl0.84(CO3)0.15, and its unit-cell parameters are a=12.047555(7), c=7.563210(6) Å, and V=1097.751(1) Å3. The average ⟨T1-O⟩ distances are 1.599(1) Å in I4/m and 1.600(2) Å in P42/n, indicating that the T1 site contains only Si atoms. In P42/n, the average distances of ⟨T2-O⟩=1.655(2) and ⟨T3-O⟩=1.664(2) Å are distinct and are not equal to each other. However, the mean ⟨T2,3-O⟩=1.659(2) Å in P42/n and is identical to the ⟨T2′-O⟩=1.659(1) Å in I4/m. The ⟨M-O⟩ [7]=2.754(1) Å (M site is coordinated to seven framework O atoms) and M-A=2.914(1) Å; these distances are identical in both space groups. The Me93 sample has a formula of Na0.29Ca3.76[Al5.54Si6.46O24]Cl0.05(SO4)0.02(CO3)0.93, and its unit-cell parameters are a=12.19882(1), c=7.576954(8) Å, and V=1127.535(2) Å3. A similar examination of the Me93 sample also shows that both space groups give similar results; however, the C–O distance is more reasonable in P42/n than in I4/m. Refining the scapolite structure near Me0 or Me100 in I4/m forces the T2 and T3 sites (both with multiplicity 8 in P42/n) to be equivalent and form the T2′ site (with multiplicity 16 in I4/m), but ⟨T2-O⟩ is not equal to ⟨T3-O⟩ in P42/n. Using different space groups for different regions across the series implies phase transitions, which do not occur in the scapolite series.

scholarly journals Crystal Chemistry and High-Temperature Behaviour of Ammonium Phases NH4MgCl3·6H2O and (NH4)2Fe3+Cl5·H2O from the Burned Dumps of the Chelyabinsk Coal Basin

Minerals ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 486 ◽  
Author(s):  
Andrey A. Zolotarev ◽  
Elena S. Zhitova ◽  
Maria G. Krzhizhanovskaya ◽  
Mikhail A. Rassomakhin ◽  
Vladimir V. Shilovskikh ◽  
...  
Keyword(s):  
Crystal Structure ◽  
High Temperature ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Coal Basin ◽  
Unit Cell Parameters ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters ◽  
Mineral Phases

The technogenic mineral phases NH4MgCl3·6H2O and (NH4)2Fe3+Cl5·H2O from the burned dumps of the Chelyabinsk coal basin have been investigated by single-crystal X-ray diffraction, scanning electron microscopy and high-temperature powder X-ray diffraction. The NH4MgCl3·6H2O phase is monoclinic, space group C2/c, unit cell parameters a = 9.3091(9), b = 9.5353(7), c = 13.2941(12) Å, β = 90.089(8)° and V = 1180.05(18) Å3. The crystal structure of NH4MgCl3·6H2O was refined to R1 = 0.078 (wR2 = 0.185) on the basis of 1678 unique reflections. The (NH4)2Fe3+Cl5·H2O phase is orthorhombic, space group Pnma, unit cell parameters a = 13.725(2), b = 9.9365(16), c = 7.0370(11) Å and V = 959.7(3) Å3. The crystal structure of (NH4)2Fe3+Cl5·H2O was refined to R1 = 0.023 (wR2 = 0.066) on the basis of 2256 unique reflections. NH4MgCl3·6H2O is stable up to 90 °C and then transforms to the less hydrated phase isotypic to β-Rb(MnCl3)(H2O)2 (i.e., NH4MgCl3·2H2O), the latter phase being stable up to 150 °C. (NH4)2Fe3+Cl5·H2O is stable up to 120 °C and then transforms to an X-ray amorphous phase. Hydrogen bonds provide an important linkage between the main structural units and play the key role in determining structural stability and physical properties of the studied phases. The mineral phases NH4MgCl3·6H2O and (NH4)2Fe3+Cl5·H2O are isostructural with natural minerals novograblenovite and kremersite, respectively.

scholarly journals On the crystal structure of the ordered vacancy compound Cu3In5Te9

2019 ◽  
Vol 65 (4 Jul-Aug) ◽  
pp. 360 ◽  
Author(s):  
G. E. Delgado ◽  
C. Rincón ◽  
G. Marroquin
Keyword(s):  
Crystal Structure ◽  
Diffraction Data ◽  
Rietveld Method ◽  
Structural Models ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters

The crystal structure of the ordered vacancy compound (OVC) Cu3In5Te9 was analyzed using powder X-ray diffraction data. Several structural models were derived from the structure of the Cu-poor Cu-In-Se compound b-Cu0.39In1.2Se2 by permuting the cations in the available site positions. The refinement of the best model by the Rietveld method in the tetragonal space group P2c (Nº 112), with unit cell parameters a = 6.1852(2) Å, c = 12.3633(9) Å, V = 472.98(4) Å3, led to Rp = 7.1 %, Rwp = 8.5 %, Rexp = 6.4 %, S = 1.3 for 162 independent reflections. This model has the following Wyckoff site atomic distribution: Cu1 in 2e (0,0,0); In1 in 2f (½,½,0), In2 in 2d (0,½,¼); Cu2-In3 in 2b (½,0,¼); in 2a (0,0,¼); Te in 8n (x,y,z).

scholarly journals New data on gersdorffite and associated minerals from the Peloritani Mountains (Sicily, Italy)

2021 ◽  
Vol 33 (6) ◽  
pp. 717-726
Author(s):  
Daniela Mauro ◽  
Cristian Biagioni ◽  
Federica Zaccarini
Keyword(s):  
Crystal Structure ◽  
Microprobe Analysis ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters ◽  
Quartz Veins ◽  
Group I

Abstract. Gersdorffite, ideally NiAsS, and associated minerals from Contrada Zillì (Peloritani Mountains, Sicily, Italy) have been characterized through electron microprobe analysis and X-ray diffraction. Primary minerals, hosted in quartz veins, are represented by gersdorffite, tetrahedrite-(Fe), and chalcopyrite with minor pyrite and galena. Rare aikinite inclusions were observed in tetrahedrite-(Fe) and chalcopyrite. Gersdorffite occurs as euhedral to subhedral crystals, up to 1 mm in size, with (Sb,Bi)-enriched cores and (Fe,As)-enriched rims. Its chemical composition is (Ni0.79−0.95Fe0.18−0.04Co0.04−0.01)(As0.90−1.03Sb0.10−0.00Bi0.02−0.00)S0.98−0.92. It crystallizes in the space group P213, with unit-cell parameters a=5.6968(7) Å, V=184.88(7) Å3, and Z=4, and its crystal structure was refined down to R1= 0.035. Associated tetrahedrite-(Fe) has chemical formula (Cu5.79Ag0.07)Σ5.86(Cu3.96Fe1.59Zn0.45)Σ6.00(Sb3.95As0.17Bi0.03)Σ4.15S13.06, with unit-cell parameters a= 10.3815(10) Å, V=1118.9(3) Å3, and space group I-43m. Its crystal structure was refined to R1=0.027. Textural and crystallographic data suggest a polyphasic crystallization of gersdorffite under low-temperature conditions.

X-ray powder diffraction data for Mn4C

2019 ◽  
Vol 34 (2) ◽  
pp. 196-197
Author(s):  
Ping-Zhan Si ◽  
Jung Tae Lim ◽  
Jihoon Park ◽  
Chul-Jin Choi
Keyword(s):  
Diffraction Data ◽  
Unit Cell Volume ◽  
Unit Cell ◽  
Powder Diffraction Data ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Perovskite Type ◽  
Perovskite Type Structure

We report on the X-ray diffraction data and unit-cell parameters of Mn4C, which has a cubic perovskite-type structure with a = 3.8726 Å and unit-cell volume V = 58.1 Å3. The measured lines were indexed and are consistent with the space group $ Pm { \bar {\it 3}} m$ (No. 221).

Molecular and crystal structure of a copper(II) complex of sildenafil

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Akhmatkhodja N. Yunuskhodjayev ◽  
Shokhista F. Iskandarova ◽  
Vahobjon Kh. Sabirov
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Unit Cell ◽  
Monoclinic Space Group ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
Piperazine Ring ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters

Abstract The crystal structure of a copper(II) complex of protonated sildenafil, CuCl3C22H31N6O4S⋅2H2O was studied by single crystal X-ray diffraction. The compound crystallizes in the monoclinic space group P21/n with the unit cell parameters a = 15.4292(2), b = 9.06735(12), c = 21.1752(2) Å, V = 2945.48(7) Å3, Z = 4. The Cu atom is coordinated by the sildenafil ligand via the N2 atom of the pyrazolopyrimidine ring and by three chloride anions. Sildenafil is protonated at the methylated N6 atom of the piperazine ring and it is cation ligand with a 1+ charge.

Crystal structure of low-cristobalite-type Al0.5Ga0.5PO4: A combined Rietveld refinement of neutron and X-ray diffraction data

2005 ◽  
Vol 20 (3) ◽  
pp. 207-211 ◽  
Author(s):  
S. N. Achary ◽  
A. K. Tyagi ◽  
S. K. Kulshreshtha ◽  
O. D. Jayakumar ◽  
P. S. R. Krishna ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Diffraction Data ◽  
Three Dimensional ◽  
Crystal Structure Analysis ◽  
Tetrahedral Coordination ◽  
X Ray Diffraction ◽  
Rietveld Refinements ◽  
X Ray ◽  
Cell Parameters ◽  
Bond Lengths

The low-cristobalite-type modification of Al0.5Ga0.5PO4 is prepared by annealing the amorphous precipitate of stoichiometric phosphate at 1300 °C. The phase purity of the sample is ascertained by powder X-ray diffraction. The crystal structure is refined by Rietveld refinements of the neutron and X-ray diffraction data of the polycrystalline powder. This compound crystallizes in an orthorhombic lattice with unit cell parameters, a=7.0295(8), b=7.0132(8), and c=6.9187(4) Å, V=341.08(6) Å3, Z=4 (Space group C 2221, No. 20). The crystal structure analysis reveals the random distribution of the Al3+ and Ga3+ having tetrahedral coordination with typical M–O (M=Al3+:Ga3+) bond lengths as 1.74 Å. Similarly, the P5+ have tetrahedral coordination with typical P–O bond lengths 1.52–1.54 Å. The Mo4 and PO4 tetraheda are linked by common corners forming a three-dimensional framework lattice. The details of the crystal structure are presented in this paper.

Sign in / Sign up

Export Citation Format

Share Document