scholarly journals Structural Concrete Prepared with Coarse Recycled Concrete Aggregate: From Investigation to Design

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Valeria Corinaldesi
Keyword(s):  
Elastic Modulus ◽  
Drying Shrinkage ◽  
Structure Design ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Concrete Aggregate ◽  
Structural Concrete ◽  
Aggregate Fraction ◽  
Concrete Mixtures

An investigation of mechanical behaviour and elastic properties of recycled aggregate concrete (RAC) is presented. RACs were prepared by using a coarse aggregate fraction made of recycled concrete coming from a recycling plant in which rubble from concrete structure demolition is collected and suitably treated. Several concrete mixtures were prepared by using either the only virgin aggregates (as reference) or 30% coarse recycled aggregate replacing gravel and by using two different kinds of cement. Different water-to-cement ratios were adopted ranging from 0.40 to 0.60. Concrete workability was always in the range 190–200 mm. Concrete compressive strength, elastic modulus, and drying shrinkage were evaluated. Results obtained showed that structural concrete up to C32/40 strength class can be manufactured with RAC. Moreover, results obtained from experimentation were discussed in order to obtain useful information for RAC structure design, particularly in terms of elastic modulus and drying shrinkage prediction.

Recycled Aggregate Concretes for Structural Applications: From Investigation to Design

2012 ◽  
Vol 548 ◽  
pp. 209-214
Author(s):  
Valeria Corinaldesi ◽  
Giacomo Moriconi
Keyword(s):  
Elastic Modulus ◽  
Drying Shrinkage ◽  
Structure Design ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Concrete Mixtures ◽  
Structural Applications

In this paper an investigation of mechanical behaviour and, in particular, elastic properties of recycled aggregate concrete (RAC) is presented. RACs were prepared by using a coarse aggregate made of old concrete particles coming from a recycling plant in which rubble from demolition of reinforced concrete structures is collected and suitably treated. Several concrete mixtures were prepared by using either the only virgin aggregates (as reference) or 30% recycled concrete aggregates replacing gravel, and by using two different kinds of cement. Different water to cement ratios were adopted ranging from 0.40 to 0.60, while concrete workability was always maintained at the same rate by adding different amounts of water-reducing admixture. Concrete compressive strength, elastic modulus and drying shrinkage were evaluated. Results obtained showed that structural concrete up to C32/40 strength class can be manufactured with RAC. Moreover, results obtained were discussed in order to obtain useful information for RAC structure design, particularly in terms of elastic modulus and drying shrinkage prediction.

Durable Performance of Recycled Concrete Using Coarse and Fine Recycled Concrete Aggregates in Air Environment

2011 ◽  
Vol 261-263 ◽  
pp. 446-449 ◽  
Author(s):  
Ping Hua Zhu ◽  
Xin Jie Wang ◽  
Jin Cai Feng
Keyword(s):  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Structural Concrete ◽  
Aggregate Concrete ◽  
Cube Strength ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Natural Aggregate ◽  
Concrete Mixtures

The influence of synchronous use of coarse and fine recycled concrete aggregates on durable performance of recycled aggregate concrete (RAC) in air environment were determined. In this study, three series of concrete mixtures were prepared, in which the coarse recycled aggregate was used as 0%, 30%, 60% and 90% replacements of coarse natural aggregate and fine recycled aggregate as 0%, 10%, 20%, and 30% replacements of fine natural aggregate. Meanwhile, fly ash and slag were used as 15%, 25%, 35% and 45% replacements of cement, respectively. The carbonation depths, compressive cube strength, workability of RACs were tested. The experimental results showed that RAC with synchronous use of coarse and fine recycled concrete aggregates had satisfactory durable performance. When RAC was used as structural concrete in air environment, the optimum synchronous replacements are 60% for coarse recycled aggregate and 20% for fine recycled aggregate.

scholarly journals PROPERTIES OF RECYCLED AGGREGATE CONCRETE

2014 ◽  
Vol 5 (2) ◽  
Author(s):  
Mirjana Malešev ◽  
Vlastimir Radonjanin ◽  
Gordana Broćeta
Keyword(s):  
Great Powers ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Concrete Aggregate ◽  
Demolition Waste ◽  
Aggregate Concrete ◽  
Recycling Industry ◽  
Concrete Mixtures

Following an example of the world's great powers that developed the recycling industry after natural disasters and wars, the paper points to the possibility of using large quantities of construction and demolition waste, generated as a result of the recent floods in the BiH and Serbia. Based on the years of extensive experimental research, and the research conducted by eminent experts, an overview is provided of the most basic properties and application of recycled aggregate concrete. It has been shown that the application of coarse recycled concrete aggregate, as the component materials in the concrete mixtures, it is possible to produce structural concrete that can be satisfactory and even with high quality, which primarily depends on the characteristics of crushed demolished concrete.

Effect of Water Reducing Admixtures and Construction Variability in Concrete Containing Recycled Aggregate Concrete

2021 ◽  
Vol 47 (3) ◽  
pp. 456-464
Author(s):  
Claude Villiers
Keyword(s):  
Compressive Strength ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Target Strength ◽  
Concrete Aggregate ◽  
Recycled Concrete Aggregate ◽  
Effect Of Water ◽  
Concrete Mixtures ◽  
Concrete Mix

The objectives of this project are to evaluate the effect of water reducing admixtures and construction variability in concrete mixtures containing recycled concrete aggregate (RCA). A concrete mix that was approved for curbs and sidewalks in the State of Florida was selected. Based on the analysis conducted, it was found that properties of the RCA were comparable to the virgin aggregate used in this project. However, the absorption of the RCA was double as compared to the limestone. Although the compressive strength of the virgin mix was decreased by 19% when RCA was introduced into the mix, both mixes met the target strength (17.2 MPa). Admixture has a significant impact on all the mixes, especially on mixes that contained RCA. When admixture was omitted, the 28-day compressive strength dropped to nearly 55% on the mixture containing RCA. In addition, the RCA mix without the admixture did not reach the target strength at 28 days. Similarly, construction variability has a significant effect on the compressive strength of the mixes. When the RCA content was increased by 15% and 25% respectively, the concrete paste was weak. These mixtures did not meet the target strength at 28 days.

scholarly journals Pore Structure and Influence of Recycled Aggregate Concrete on Drying Shrinkage

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Yuanchen Guo ◽  
Jueshi Qian ◽  
Xue Wang
Keyword(s):  
Fractal Dimension ◽  
Pore Structure ◽  
Drying Shrinkage ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Water Evaporation ◽  
Concrete Aggregate ◽  
Aggregate Concrete ◽  
Mercury Intrusion

Pore structure plays an important role in the drying shrinkage of recycled aggregate concrete (RAC). High-precision mercury intrusion and water evaporation were utilized to study the pore structure of RAC, which has a different replacement rate of recycled concrete aggregate (RCA), and to analyze its influence on drying shrinkage. Finally, a fractal-dimension calculation model was established based on the principles of mercury intrusion and fractal-geometry theory. Calculations were performed to study the pore-structure fractal dimension of RAC. Results show the following. (1) With the increase in RCA content, the drying shrinkage values increase gradually. (2) Pores with the greatest impact on concrete shrinkage are those whose sizes ranging from 2.5 nm to 50 nm and from 50 nm to 100 nm. In the above two ranges, the proportions of RAC are greater than those of RC0 (natural aggregate concrete, NAC), which is the main reason the shrinkage values of RAC are greater than those of NAC. (3) The pore structure of RAC has good fractal feature, and the addition of RCA increases the complexity of the pore surface of concrete.

Thermal Properties of Concrete with Recycled Aggregate

2014 ◽  
Vol 1054 ◽  
pp. 227-233 ◽  
Author(s):  
Magdaléna Šefflová ◽  
Martin Volf ◽  
Tereza Pavlů
Keyword(s):  
Thermal Properties ◽  
Building Materials ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Concrete Aggregate ◽  
Recycled Concrete Aggregate ◽  
Conventional Concrete ◽  
Concrete Mixtures ◽  
Reference Mixture

Currently, the emphasis is put on sustainable buildings; simultaneously, the emphasis is put on energy efficiency in buildings, with respect to this fact of necessity to test thermal properties of new building materials. This article deals with the thermal properties of concrete containing recycled concrete aggregate. Four types of recycled concrete aggregate were used for the production of the concrete. For the testing of concrete, a total of ten concrete mixtures were made, one of which was a reference mixture and the natural aggregate was replaced by recycled aggregate of varying ratio in the other mixtures. Finally, it is possible to say that according to the thermal properties of the recycled aggregate concrete is possible to be used in the same applications as conventional concrete.

Recycling of Waste Concrete and Fly Ash for Recycled Aggregate Concrete: Fundamental Characteristics Evaluation

2009 ◽  
Vol 620-622 ◽  
pp. 255-258 ◽  
Author(s):  
Cheol Woo Park
Keyword(s):  
Fly Ash ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Experimental Program ◽  
Concrete Aggregate ◽  
Fine Aggregate ◽  
Recycled Concrete Aggregate ◽  
Aggregate Concrete ◽  
Waste Concrete

As the amount of waste concrete has been increased and recycling technique advances, this study investigates the applicability of recycled concrete aggregate for concrete structures. In addition fly ash, the industrial by-product, was considered in the concrete mix. Experimental program performed compressive strength and chloride penetration resistance tests with various replacement levels of fine recycled concrete aggregate and fly ash. In most case, the design strength, 40MPa, was obtained. It was known that the replacement of the fine aggregate with fine RCA may have greater influence on the strength development rather than the addition of fly ash. It is recommended that when complete coarse aggregate is replaced with RCA the fine RCA replacement should be less than 60%. The recycled aggregate concrete can achieve sufficient resistance to the chloride ion penetration and the resistance can be more effectively controlled by adding fly ash. It I finally conclude that the recycled concrete aggregate can be successfully used in the construction field and the recycling rate of waste concrete and flay ash should be increased without causing significant engineering problems.

Performance Enhancement of Recycled Aggregate Concrete – An Experimental Study

2021 ◽  
Author(s):  
Sivamani Jagan ◽  
Thurvas Renganathan Neelakantan ◽  
Palaniraj Saravanakumar
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Elastic Modulus ◽  
Performance Enhancement ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Aggregate Concrete ◽  
Coarse Aggregates ◽  
Durability Properties ◽  
Concrete Mixtures

Extensive studies have been performed on the mechanical and durability properties of the concrete prepared with recycled coarse aggregates (RCA), however, only modest consideration has been given to the studies on the behaviour of RAC prepared by alternative mixing approach techniques. This study presents the mechanical properties of the recycled aggregate concrete (RAC) with different percentages of RCA prepared by normal mixing approach (NMA), two-stage mixing approach (TSMA) and sand enveloped mixing approach (SEMA) techniques. The manufactured concrete mixtures were tested for compression, tension, flexure and elastic modulus at 7, 28 and 90 days. The results indicate that the mechanical properties of the RAC (with 100% of RCA) prepared through TSMA and SEMA were improved by 9.36 and 12.14% at 28 days. Perhaps, prolonged curing to TSMA and SEMA mixtures improved the mechanical properties of the RAC that is nearly equal to normal aggregate concrete (NAC) prepared by NMA.

Structural Concrete with Recycled Aggregate: Advances in Mechanical Properties, Durability and Sustainability

2016 ◽  
Vol 847 ◽  
pp. 553-558 ◽  
Author(s):  
Marc Antonio Liotta ◽  
Marco Viviani ◽  
Carlotta Rodriquez
Keyword(s):  
Cement Mortar ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Mix Design ◽  
Elastic Behavior ◽  
Structural Concrete ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Ordinary Concrete

A large number of tests has been carried out in the last 15 years all around the world to study the possibility to use recycled concrete aggregates (RCA) to produce structural concrete.Earlier tests indicated that RCA concrete had lower properties in comparison to ordinary concrete, such as lower elastic modulus, a more brittle post-elastic behavior, lower workability, higher shrinkage and creep.Most of these issues have been addressed to the content of cement mortar remaining in adhesion to the aggregate after the recycling processes and that cannot be totally eliminated without high economic and ecological costs. This cement mortar which has undergone the crushing process creates zones of weakness in the RCA, causes higher water absorption, higher concrete porosity and causes the decay of the aforementioned properties.More recent tests prove that Recycled Concrete shows this peculiar problems only with a percentage of substitution of standard aggregates with RCA higher than 30%. Under this percentage recycled aggregate concrete (RAC) can be considered as a standard concrete, on condition that an appropriate mix design is performed.

Experimental Research on Mechanical Properties of Recycled Aggregate Concrete under Uniaxial Loading

2013 ◽  
Vol 671-674 ◽  
pp. 1736-1740
Author(s):  
Xue Yong Zhao ◽  
Mei Ling Duan
Keyword(s):  
Elastic Modulus ◽  
Coarse Aggregate ◽  
Strain Curve ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Peak Strain ◽  
Stress Strain ◽  
Aggregate Concrete ◽  
Recycled Coarse Aggregate

The complete stress-strain curves of recycled aggregate concrete with different recycled coarse aggregate replacement percentages were tested and investigated. An analysis was made of the influence of varying recycled coarse aggregate contents on the complete stress-strain curve, peak stress, peak strain and elastic modulus etc. The elastic modulus of RC is lower than natural concrete (NC), and with the recycled coarse aggregate contents increase, it reduces. While with the increase of water-cement ratio (W/C), recycled concrete compressive strength and elastic modulus improve significantly. In addition, put forward a new equation on the relationship between Ec and fcu of the RC.

Sign in / Sign up

Export Citation Format

Share Document