scholarly journals Analysis of Mode I Periodic Parallel Cracks-Tip Stress Field in an Infinite Orthotropic Plate

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Wenbin Zhao ◽  
Lujuan Yu ◽  
Xuexia Zhang ◽  
Hailing Xie ◽  
Zhixin Hu
Keyword(s):  
Differential Equation ◽  
Partial Differential Equation ◽  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Boundary Value Problem ◽  
Composite Plate ◽  
Crack Tip ◽  
Orthotropic Composite ◽  
Parallel Cracks

The mechanical behavior near crack tip for periodic parallel cracks in an orthotropic composite plate subjected to the uniformly distributed load within the cracks surface is studied. The mechanical problem is turned into the boundary value problem of partial differential equation. By using the periodicity of the hyperbolic function in the complex domain and constructing proper Westergaard stress function, the periodicity of parallel cracks can be removed. Using the complex variable function method and the undetermined coefficients method, the boundary value problem of partial differential equation can be solved with the help of boundary conditions. The analytic expressions for stress intensity factor, stress, and displacement near the crack tip of periodical parallel cracks are obtained. When the vertical distance of cracks tends to infinity, the stress intensity factor degenerates into a single central crack situation. The stress intensity factor around the crack tip of periodic parallel cracks in an orthotropic composite plate depends on the shape factor. The interaction happens between the cracks. Finally, a numerical analysis of the stress and displacement changed with the polar angle is done.

An Analytical Solution for Anisotropic Composite Plate of Crack under Bending and Twisting

2011 ◽  
Vol 197-198 ◽  
pp. 1567-1572
Author(s):  
Xue Xia Zhang ◽  
Xiao Chao Cui ◽  
Wei Yang Yang ◽  
Wen Bin Zhao
Keyword(s):  
Differential Equation ◽  
Partial Differential Equation ◽  
Boundary Value Problem ◽  
Composite Plate ◽  
Boundary Value ◽  
Crack Tip ◽  
Theoretical Research ◽  
Partial Differential ◽  
Anisotropic Composite ◽  
Variable Function

Analysis of mechanical behaviors near crack tip for linear elastic anisotropic composite plate under bending loadings and twisting loadings was done. By introducing proper deflection function, the mechanical problem reduced to the boundary value problem of partial differential equation. The mixed mode stress intensity factor at the crack tip were presented under bending loadings and twisting loadings at infinity. By solving boundary value problem of partial differential equation and using a complex variable function method, the expressions for bending moments, strains and displacements near crack tip are derived. The obtained results are used to the theoretical research and experimental analysis of the fracture problems of composite plate.

A new type of cracks adding to Griffith–Irwin cracks

2019 ◽  
Vol 485 (2) ◽  
pp. 162-165
Author(s):  
V. A. Babeshko ◽  
O. M. Babeshko ◽  
O. V. Evdokimova
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Crack Tip ◽  
Stress Concentrations ◽  
New Type

The distinctions in the description of the conditions of cracking of materials are revealed. For Griffith–Irwin cracks, fracture is determined by the magnitude of the stress-intensity factor at the crack tip; in the case of the new type of cracks, fracture occurs due to an increase in the stress concentrations up to singular concentrations.

scholarly journals Optimisation Method for Determination of Crack Tip Position Based on Gauss-Newton Iterative Technique

2021 ◽  
Vol 34 (1) ◽  
Author(s):  
Bing Yang ◽  
Zhanjiang Wei ◽  
Zhen Liao ◽  
Shuwei Zhou ◽  
Shoune Xiao ◽  
...  
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Plastic Zone ◽  
Relative Error ◽  
Crack Tip ◽  
Image Correlation ◽  
Preconditioned Conjugate Gradient ◽  
Loading Process ◽  
Tip Position

AbstractIn the digital image correlation research of fatigue crack growth rate, the accuracy of the crack tip position determines the accuracy of the calculation of the stress intensity factor, thereby affecting the life prediction. This paper proposes a Gauss-Newton iteration method for solving the crack tip position. The conventional linear fitting method provides an iterative initial solution for this method, and the preconditioned conjugate gradient method is used to solve the ill-conditioned matrix. A noise-added artificial displacement field is used to verify the feasibility of the method, which shows that all parameters can be solved with satisfactory results. The actual stress intensity factor solution case shows that the stress intensity factor value obtained by the method in this paper is very close to the finite element result, and the relative error between the two is only − 0.621%; The Williams coefficient obtained by this method can also better define the contour of the plastic zone at the crack tip, and the maximum relative error with the test plastic zone area is − 11.29%. The relative error between the contour of the plastic zone defined by the conventional method and the area of the experimental plastic zone reached a maximum of 26.05%. The crack tip coordinates, stress intensity factors, and plastic zone contour changes in the loading and unloading phases are explored. The results show that the crack tip change during the loading process is faster than the change during the unloading process; the stress intensity factor during the unloading process under the same load condition is larger than that during the loading process; under the same load, the theoretical plastic zone during the unloading process is higher than that during the loading process.

scholarly journals Critical value of the generalized stress intensity factor for a crack perpendicular to an interface

2015 ◽  
Vol 471 (2183) ◽  
pp. 20150571 ◽  
Author(s):  
George G. Adams
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Cohesive Zone ◽  
Cohesive Zone Model ◽  
Crack Tip ◽  
Critical Value ◽  
Zone Model ◽  
Cohesive Stress ◽  
Generalized Stress Intensity Factor

When a crack tip impinges upon a bi-material interface, the order of the stress singularity will be equal to, less than or greater than one-half. The generalized stress intensity factors have already been determined for some such configurations, including when a finite-length crack is perpendicular to the interface. However, for these non-square-root singular stresses, the determination of the conditions for crack growth are not well established. In this investigation, the critical value of the generalized stress intensity factor for tensile loading is related to the work of adhesion by using a cohesive zone model in an asymptotic analysis of the separation near the crack tip. It is found that the critical value of the generalized stress intensity factor depends upon the maximum stress of the cohesive zone model, as well as on the Dundurs parameters ( α and β ). As expected this dependence on the cohesive stress vanishes as the material contrast is reduced, in which case the order of the singularity approaches one-half.

Plastic Stress Intensity Factors for Small Scale Yielding in Antiplane Shear by Caustics

1982 ◽  
Vol 49 (4) ◽  
pp. 754-760 ◽  
Author(s):  
P. S. Theocaris ◽  
C. I. Razem
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Crack Tip ◽  
Antiplane Shear ◽  
Elastic Behavior ◽  
Small Scale ◽  
Small Scale Yielding ◽  
Scale Yielding ◽  
Plastic Stress

The KIII-stress intensity factor in an edge-cracked plate submitted to antiplane shear may be evaluated by the reflected caustic created around the crack tip, provided that a purely elastic behavior exists at the crack tip [1]. For a work-hardening, elastic-plastic material, when stresses at the vicinity of the crack tip exceed the yield limit of the material, the new shape of caustic differs substantially from the corresponding shape of the elastic solution. In this paper the shape and size of the caustics created at the tip of the crack, when small-scale yielding is established in the vicinity of the crack tip, were studied, based on a closed-form solution introduced by Rice [2]. The plastic stress intensity factor may be evaluated from the dimensions of the plastic caustic. Experimental evidence with cracked plates made of opaque materials, like steel, corroborated the results of the theory.

Crack Tip Stress Analysis of the Steam Generator Dissimilar Steel Welded Joint under Residual Stress Field

2019 ◽  
Vol 795 ◽  
pp. 451-457
Author(s):  
Bao Yin Zhu ◽  
Xian Xi Xia ◽  
He Zheng ◽  
Guo Dong Zhang
Keyword(s):  
Residual Stress ◽  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Intensity Factor ◽  
Stress Field ◽  
Numerical Method ◽  
Steam Generator ◽  
Welded Joint ◽  
Crack Tip ◽  
Residual Stress Field

An typical mode of a structural integrity failure in dissimilar steel welded joints. This paper aims at studying crack tip stress of a steam generator dissimilar welded joint under residual stress field with the method of interaction integral and XFEM. Firstly, the corresponding weak form is obtained where the initial stress field is involved, which is the key step for the XFEM. Then, the interaction integral is applying to calculate the stress intensity factor. In addition, two simple benchmark problems are simulated in order to verify the precision of this numerical method. Finally, this numerical method is applying to calculate the crack tip SIF of the addressed problem. This study finds that the stress intensity factor increases firstly then decreases with the deepening of the crack. The main preponderance of this method concerns avoiding mesh update by take advantage of XFEM when simulating crack propagation, which could avoid double counting. In addition, our obtained results will contribute to the safe assessment of the nuclear power plant steam generator.

Sign in / Sign up

Export Citation Format

Share Document