scholarly journals Bearing Fault Diagnosis Based on Deep Belief Network and Multisensor Information Fusion

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Jie Tao ◽  
Yilun Liu ◽  
Dalian Yang
Keyword(s):  
Fault Diagnosis ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Deep Belief Network ◽  
Identification Accuracy ◽  
Learning Ability ◽  
Belief Network ◽  
Bearing Fault ◽  
Bearing Fault Diagnosis ◽  
The Individual

In the rolling bearing fault diagnosis, the vibration signal of single sensor is usually nonstationary and noisy, which contains very little useful information, and impacts the accuracy of fault diagnosis. In order to solve the problem, this paper presents a novel fault diagnosis method using multivibration signals and deep belief network (DBN). By utilizing the DBN’s learning ability, the proposed method can adaptively fuse multifeature data and identify various bearing faults. Firstly, multiple vibration signals are acquainted from various fault bearings. Secondly, some time-domain characteristics are extracted from original signals of each individual sensor. Finally, the features data of all sensors are put into the DBN and generate an appropriate classifier to complete fault diagnosis. In order to demonstrate the effectiveness of multivibration signals, experiments are carried out on the individual sensor with the same conditions and procedure. At the same time, the method is compared with SVM, KNN, and BPNN methods. The results show that the DBN-based method is able to not only adaptively fuse multisensor data, but also obtain higher identification accuracy than other methods.

Domain adaptive deep belief network for rolling bearing fault diagnosis

2020 ◽  
Vol 143 ◽  
pp. 106427 ◽  
Author(s):  
Changchang Che ◽  
Huawei Wang ◽  
Xiaomei Ni ◽  
Qiang Fu
Keyword(s):  
Fault Diagnosis ◽  
Rolling Bearing ◽  
Deep Belief Network ◽  
Belief Network ◽  
Bearing Fault ◽  
Bearing Fault Diagnosis

scholarly journals Deep Transfer Learning Method Based on 1D-CNN for Bearing Fault Diagnosis

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Jun He ◽  
Xiang Li ◽  
Yong Chen ◽  
Danfeng Chen ◽  
Jing Guo ◽  
...  
Keyword(s):  
Fault Diagnosis ◽  
Transfer Learning ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Learning Method ◽  
Target Domain ◽  
Source Domain ◽  
Second Order Statistics ◽  
Bearing Fault ◽  
Bearing Fault Diagnosis

In mechanical fault diagnosis, it is impossible to collect massive labeled samples with the same distribution in real industry. Transfer learning, a promising method, is usually used to address the critical problem. However, as the number of samples increases, the interdomain distribution discrepancy measurement of the existing method has a higher computational complexity, which may make the generalization ability of the method worse. To solve the problem, we propose a deep transfer learning method based on 1D-CNN for rolling bearing fault diagnosis. First, 1-dimension convolutional neural network (1D-CNN), as the basic framework, is used to extract features from vibration signal. The CORrelation ALignment (CORAL) is employed to minimize marginal distribution discrepancy between the source domain and target domain. Then, the cross-entropy loss function and Adam optimizer are used to minimize the classification errors and the second-order statistics of feature distance between the source domain and target domain, respectively. Finally, based on the bearing datasets of Case Western Reserve University and Jiangnan University, seven transfer fault diagnosis comparison experiments are carried out. The results show that our method has better performance.

High Resonance Component of Resonance-Based Sparse Decomposition Application in Extraction of Rolling Bearing Fault Information

2013 ◽  
Vol 753-755 ◽  
pp. 2290-2296 ◽  
Author(s):  
Wen Tao Huang ◽  
Yin Feng Liu ◽  
Pei Lu Niu ◽  
Wei Jie Wang
Keyword(s):  
Fault Diagnosis ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Frequency Resolution ◽  
Sparse Decomposition ◽  
High Resonance ◽  
Bearing Fault ◽  
Bearing Fault Diagnosis ◽  
Information Frequency ◽  
Fault Information

In the early fault diagnosis of rolling bearing, the vibration signal is mixed with a lot of noise, resulting in the difficulties in analysis of early weak fault signal. This article introduces resonance-based signal sparse decomposition (RSSD) into rolling bearing fault diagnosis, and studies the fault information contained in high resonance component and low resonance component. This article compares the effect of the two resonance components to extract rolling bearing fault information in four aspects: the amount of fault information, frequency resolution of subbands, sensitivity to noise and immunity to autocorrelation processing. We find that the high resonance component has greater advantage in extraction of rolling bearing fault information, and it is able to indicate rolling bearing failure accurately.

Feature Extraction of Rolling Bearing Fault Diagnosis

2012 ◽  
Vol 190-191 ◽  
pp. 993-997
Author(s):  
Li Jie Sun ◽  
Li Zhang ◽  
Yong Bo Yang ◽  
Da Bo Zhang ◽  
Li Chun Wu
Keyword(s):  
Feature Extraction ◽  
Fault Diagnosis ◽  
Attribute Reduction ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Mechanical Equipment ◽  
Characteristic Parameters ◽  
Bearing Fault ◽  
Bearing Fault Diagnosis ◽  
Experimental Trials

Mechanical equipment fault diagnosis occupies an important position in the industrial production, and feature extraction plays an important role in fault diagnosis. This paper analyzes various methods of feature extraction in rolling bearing fault diagnosis and classifies them into two big categories, which are methods of depending on empirical rules and experimental trials and using objective methods for screening. The former includes five methods: frequency as the characteristic parameters, multi-sensor information fusion method, rough set attribute reduction method, "zoom" method and vibration signal as the characteristic parameters. The latter includes two methods: sensitivity extraction and data mining methods to select attributes. Currently, selection methods of feature parameters depend heavily on empirical rules and experimental trials, thus extraction results are be subjected to restriction from subjective level, feature extraction in the future will develop toward objective screening direction.

A rolling bearing fault diagnosis method based on fastDTW and an AGBDBN

2020 ◽  
Vol 62 (8) ◽  
pp. 457-463 ◽  
Author(s):  
Shang Zhiwu ◽  
Liu Xia ◽  
Li Wanxiang ◽  
Gao Maosheng ◽  
Yu Yan
Keyword(s):  
Fault Diagnosis ◽  
Vibration Signal ◽  
Rolling Bearing ◽  
Deep Belief Network ◽  
Residual Vector ◽  
Belief Network ◽  
Network Training ◽  
Diagnosis Method ◽  
Stationary Vibration ◽  
Dynamic Time

In order to improve fault feature extraction and diagnosis for rolling bearings, a fault diagnosis method based on fast dynamic time warping (fastDTW) and an adaptive Gaussian-Bernoulli deep belief network (AGBDBN) is proposed in this paper. Firstly, for the non-stationary vibration signal characteristics of the bearing, the fastDTW algorithm is used to calculate the residual vector of the fault signal, thereby enhancing the fault characteristic information. Then, according to the continuous vibration value of the bearing vibration signal, a standard deep belief network (DBN) is improved to deal with the problem that the optimal setting for the learning rate is difficult to achieve in the deep neural network training process and the AGBDBN model is used for fault diagnosis. Finally, the proposed method is compared with a variety of model diagnosis methods. The experimental results show that the proposed method achieved good diagnostic results.

Sign in / Sign up

Export Citation Format

Share Document