Abstract 3138: Mechanism based quality control (MBQC) for the four-herb Chinese medicine formulation, PHY906(YIV-906) and other herbal products

Author(s):  
Wing Lam ◽  
Yongshen Ren ◽  
Fulan Guan ◽  
Zaoli jiang ◽  
William Cheng ◽  
...  
2020 ◽  
Vol 24 (04) ◽  
pp. 640-649
Author(s):  
Noorazwani Zainol ◽  
Mohamad Shahrizad Pairon ◽  
Mohd Eeyad Arief Mohd Nor Asri ◽  
Khetiswari Ganesan

2020 ◽  
Vol 17 (1) ◽  
pp. 47-56
Author(s):  
Shun Liu ◽  
Xun Wang ◽  
Kaiping Zou ◽  
Wei Liu ◽  
Cunyu Li ◽  
...  

Background: Zishen Tongguan (ZSTG) capsules were prepared at the Affiliated Hospital of Nanjing University of Chinese Medicine and have been proven to be clinically effective for treating pyelonephritis and benign prostatic hyperplasia. However, the quality standards are not ideal; a comprehensive study of the “quality markers” (Q-markers), the chemicals inherent in traditional Chinese medicine and its preparations, has not been carried out. Experimental Methods: In this paper, a sensitive and specific ultra-high-performance liquid chromatographictandem mass spectrometry (UHPLC-MS/MS) method was developed for the simultaneous determination of eight potential Q-markers of ZSTG, including timosaponin A3, berberine, jatrorrhizine, phellodendrine, palmatine, mangiferin, neomangiferin, and timosaponin BII. A Kromasil 100-3.5 C18 column was used with a mobile phase of 0.2% formic acid with acetonitrile, and gradient elution at a flow rate of 0.2 mL/min was achieved in 13 minutes and used for separation. Detection was performed in positive/negative mode with multiple reaction monitoring (MRM). Results: The analytical method was validated in terms of the sensitivity, linearity, accuracy, precision, repeatability, stability and recovery. The method established here was successfully applied to study the potential Q-markers in 8 batches of commercial samples, which demonstrated its use in improving the quality control of ZSTG. Conclusion: The developed method had high repeatability and accuracy and was suitable for the simultaneous analysis of multiple Q-markers, which may provide a new basis for the comprehensive assessment and overall quality control of ZSTG.


2018 ◽  
Vol 11 (06) ◽  
pp. 1850034
Author(s):  
Hongxia Huang ◽  
Yuanyuan Lv ◽  
Xiaoyi Sun ◽  
Shuangshuang Fu ◽  
Xuefang Lou ◽  
...  

A technique for the determination of tannin content in traditional Chinese medicine injections (TCMI) was developed based on ultraviolet (UV) spectroscopy. Chemometrics were used to construct a mathematical model of absorption spectrum and tannin reference content of Danshen and Guanxinning injections, and the model was verified and applied. The results showed that the established UV-based spectral partial least squares regression (PLS) tannin content model performed well with a correlation coefficient ([Formula: see text]) of 0.952, root mean square error of calibration (RMSEC) of 0.476[Formula: see text][Formula: see text]g/ml, root mean square error of validation (RMSEV) of 1.171[Formula: see text][Formula: see text]g/ml, and root mean square error of prediction (RMSEP) of 0.465[Formula: see text][Formula: see text]g/ml. Pattern recognition models using linear discriminant analysis (LDA) and [Formula: see text] nearest neighbor ([Formula: see text]-NN) classifiers based on UV spectrum could successfully classify different types of injections and different manufacturers. The established method to measure tannin content based on UV spectroscopy is simple, rapid and reliable and provides technical support for quality control of tannin in Chinese medicine injections.


2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Chu-Yao Tseng ◽  
Ching-Wen Huang ◽  
Hsin-Chia Huang ◽  
Wei-Chen Tseng

Traditional Chinese medicine (TCM) divides fracture treatment into three stages. Many TCM herbs and formulas have been used to treat fractures for thousands of years. However, research regarding the Chinese herbal products (CHPs) that should be used at different periods of treatment is still lacking. This study aims to identify the CHPs that should be used at different periods of treatment as well as confirm the TCM theory of fracture periods medicine. We used prescriptions of TCM outpatients with fracture diagnoses analyzed using the Chang Gung Research Database (CGRD) from 2000 to 2015. According to the number of days between the date of the fracture and the clinic visit date, all patients were assigned to one of three groups. Patients with a date gap of 0-13 days were assigned to the early period group; those with a date gap of 14-82 days were assigned to the middle period group; and those with a date gap of 83-182 days were assigned to the late period group. We observed the average number of herbal formulas prescribed by the TCM doctor at each visit was 2.78, and the average number of single herbs prescribed was 6.47. The top three prescriptions in the early fracture period were Zheng-gu-zi-jin-dang, Shu-jing-huo-xue-tang, and Wu-ling-san. In the middle fracture period, the top three formulas were Zheng-gu-zi-jin-dang, Shu-jing-huo-xue-tang, and Zhi-bai-di-huang-wan. In the late fracture period, the top three formulas were Shu-jing-huo-xue-tang, Gui-lu-er-xian-jiao, and Du-huo-ji-sheng-tang. The main single herbs used in the early fracture period were Yan-hu-suo, Gu-sui-bu, and Dan-shen. From the middle to the late period, the most prescribed single herbs were Xu-duan, Gu-sui-bu, and Yan-hu-suo. We concluded that the results showed that the CGRD utilization pattern roughly meets the TCM theory at different fracture periods.


2018 ◽  
Vol 32 (12) ◽  
pp. e4363 ◽  
Author(s):  
Polina Turova ◽  
Elena Stekolshchikova ◽  
Timur Baygildiev ◽  
Oleg Shpigun ◽  
Igor Rodin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document