scholarly journals Solar assisted cooling rule in indoor air quality

2020 ◽  
Vol 10 (4) ◽  
pp. 3948
Author(s):  
Ali M. Baniyounes ◽  
Yazeed Y. Ghadi
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Air Conditioning ◽  
Cooling System ◽  
Internal Heat ◽  
Subtropical Climate ◽  
Mould Growth ◽  
Human Thermal Comfort

<p>Indoor air quality as always is the centre of attention for researchers, architect developers and public health officials. As every-one know. The human exposure to a variety of indoor pollutants and the high cost of energy are the motivation for these kinds of studies. Fungus and mould growth has always been a problem in subtropical climate areas due to the high temperature and high humidity. Generally in institutional buildings, most of the internal heat load is generated by human body and thermal comfort is achieved with   extensive usage of recycled air and air conditioning. The main considerations in any air conditioning system economisers are based on the usage of recycled air and air ventilation. The current practice in an institutional building cooling system under subtropical climate is to curb the mould issue by overcooling large recirculation airflow to remove the moisture content from the air, which is considered as an expensive practice. The use of a solar desiccant cooling system to reduce moisture from the air and to improve indoor air quality is found to be economical, environmental friendly and readily achievable in the tropics. This technology is the future alternative to the conventional vapour compression cooling system to maintain human thermal comfort conditions and enhance indoor air quality. Solar desiccant cooling systems are also environmentally friendly and energy efficient. This paper presents review on a solar desiccant cooling system and its effect on indoor air quality. It first introduces the issue of air moisture, mould growth and indoor air quality and then the development and application of thermally activated desiccant cooling technologies.</p>

scholarly journals Keeping Cool in the Desert: Using Wind Catchers for Improved Thermal Comfort and Indoor Air Quality at Half the Energy

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 100
Author(s):  
Jamal Saif ◽  
Andrew Wright ◽  
Sanober Khattak ◽  
Kasem Elfadli
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Energy Demand ◽  
Air Conditioning ◽  
Natural Ventilation ◽  
Energy Use ◽  
Cooling System ◽  
Evaporative Cooling

In hot arid climates, air conditioning in the summer dominates energy use in buildings. In Kuwait, energy demand in buildings is dominated by cooling, which also determines the national peak electricity demand. Schools contribute significantly to cooling demand, but also suffer from poor ventilation. This paper presents analysis of a ventilation and cooling system for school classrooms using a wind catcher for natural ventilation and evaporative cooling. A school classroom in Kuwait with single-sided ventilation was modelled using the DesignBuilder V5.4/EnergyPlus V9.1 software and calibrated using field data. The model was used to analyse the performance of a wind catcher, with and without evaporative cooling, in terms of energy use, thermal comfort and indoor air quality. Compared to the baseline of using air-conditioning only, a wind catcher with evaporative cooling was found to reduce energy use by 52% during the summer months while increasing the comfortable hours from 76% to 100% without any supplementary air conditioning. While the time below the ASHRAE CO2 limit also improved from 11% to 24% with the wind catcher, the indoor air quality was still poor. These improvements came at the cost of a 14% increase in relative humidity. As the wind catcher solution appears to have potential with further development; several avenues for further research are proposed.

Human Thermal Comfort and Indoor Air Quality

2016 ◽  
pp. 67-98
Author(s):  
T. Agami Reddy ◽  
Jan F. Kreider ◽  
Peter S. Curtiss ◽  
Ari Rabl
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Human Thermal Comfort

Distribution of Indoor Air Quality under Air Conditioning Running

2014 ◽  
Vol 945-949 ◽  
pp. 976-979
Author(s):  
Bao Wei Liu
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Air Quality ◽  
Theoretical Analysis ◽  
Thermal Comfort ◽  
Energy Saving ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Air Conditioning ◽  
Dynamics Model

People are constantly committed to seeking new ways that energy saving ventilation can improve indoor air quality. In this paper, methods of theoretical analysis and numerical simulation combining established indoor ventilation jet crash fluid dynamics model to simulate the indoor air, thermal comfort and indoor air quality issues.

scholarly journals Thermal comfort analysis in office buildings with different air-conditioning systems

2018 ◽  
Vol 9 (1) ◽  
pp. 59-63 ◽  
Author(s):  
J. Szabo ◽  
L. Kajtar
Keyword(s):  
Air Quality ◽  
Thermal Comfort ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Air Conditioning ◽  
Carbon Dioxide Concentration ◽  
Comfort Level ◽  
Office Buildings ◽  
Ducted Fan ◽  
Air Conditioning Systems

It is a prime aim to ensure a suitable comfort level in case of office buildings. The productivity of office employees is directly influenced by the comfort. Thermal discomfort and poor indoor air quality deteriorate the intensity and quality of human work. We investigated the comfort in office buildings with on-site measurements during the summer season. The office buildings were operating with different HVAC (Heating, Ventilating and Air-Conditioning) systems: ducted fan-coil with suspended ceiling, installation, non-ducted fan-coil with floor-mounted installation, active chilled beam with fresh air supply. We evaluated the thermal comfort under PMV (Predicted Mean Vote), PPD (Predicted Percentage of Dissatisfied), the local discomfort based on DR (Draught Rate) and the IAQ (Indoor Air Quality) based on carbon dioxide concentration. The comfort measurements were evaluated. The measurements were evaluated with scientific research methods, comfort categories based on the requirements of CR 1752. The results of this comparison were presented in this article.

Sign in / Sign up

Export Citation Format

Share Document